A Brief Review of Some Challenging Issues in Textured Piezoceramics via Templated Grain Growth Method
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
It is well known that polycrystalline ceramics fabricated via the templated grain growth method along a desired crystallographic direction, generally along [001], exhibits enhanced piezoelectric response. Generally, the piezoelectric properties of textured ceramics depend on the degree of texture, as piezoelectric properties peak in single crystals. Therefore, understanding the relationship between the degree of texture and piezoelectric properties is fundamental. Here, we present state-of-the-art textured piezoceramics by focusing on critical issues such as the quality of templates used for texturing and proper evaluation of the degree of texture analysis. The relationship between the degree of texture and its impact on the properties of textured materials is exclusively defined by the Lotgering factor (L.F.) calculated from the X-ray diffraction profiles. Additionally, we show that L.F. is not a suitable indicator of the degree of texture, contrary to previous interpretations. This statement was further supported by the fact that the true degree of texture can be better quantified by the multiples of random distribution. This argument was justified by comparing the quantitative values of the degree of texture obtained from both methods to those of the piezoelectric charge coefficient of textured and random ceramics.
Abstract
It is well known that polycrystalline ceramics fabricated via the templated grain growth method along a desired crystallographic direction, generally along [001], exhibits enhanced piezoelectric response. Generally, the piezoelectric properties of textured ceramics depend on the degree of texture, as piezoelectric properties peak in single crystals. Therefore, understanding the relationship between the degree of texture and piezoelectric properties is fundamental. Here, we present state-of-the-art textured piezoceramics by focusing on critical issues such as the quality of templates used for texturing and proper evaluation of the degree of texture analysis. The relationship between the degree of texture and its impact on the properties of textured materials is exclusively defined by the Lotgering factor (L.F.) calculated from the X-ray diffraction profiles. Additionally, we show that L.F. is not a suitable indicator of the degree of texture, contrary to previous interpretations. This statement was further supported by the fact that the true degree of texture can be better quantified by the multiples of random distribution. This argument was justified by comparing the quantitative values of the degree of texture obtained from both methods to those of the piezoelectric charge coefficient of textured and random ceramics.
참고문헌 (36)
- A. M. Manjón-Sanz, "Applications of piezoelectrics: Old and new", Chem. Mater., 30(24), pp.8718~8726 (2018)
- W. Heywang, "Piezoelectricity:evolution and future of a technology", SSBM, 114, pp.37~88 (2008)
- A. Behera, "Adv. Mater", pp.43~76 (2022), Springer
- C. H. Hong, "Lead-free piezoceramics – Where to move on?", J. Materiomics, 2(1), pp.1~24 (2016)
- P. G. Le, "Solid state crystal growth of single crystals of 0.75(Na1", 2Bi1, J. Asian Ceram. Soc., pp.2021, 9(1)[DOI]
- I. Milisavljevic, "Current status of solid-state single crystal growth", BMC Materials, 2(1), pp.1~26 (2020)
- G. L. Messing, "Templated grain growth of textured piezoelectric ceramics", Crit. Rev. Solid State Mater. Sci, 29(2), pp.45~96 (2004)
- S. Kwon, "High Strain,<001>Textured 0.675Pb(Mg1", 3Nb2, J. Am. Ceram. Soc., pp.2005, 88(2)[DOI]
- J. Wu, "Prospect of texture engineered ferroelectric ceramics", Appl. Phys. Lett., 121(12), pp.120501~ (2022)
- Z. Zhang, "Preparation and anisotropic properties of textured structural ceramics : A review", J. Adv. Ceram, 8(3), pp.289~332 (2019)
- Y. Sun, "Ultrahigh energy harvesting properties in textured lead-free piezoelctric composites", J. Mater. Chem. A, 7(8), pp.3603~3611 (2019)
- ceramics, "J. Mater. Sci.: Mater. Electron.", 2018, 13310~13320
- T. T. Zate, "Outstanding unipolar strain of textured Pb(Mg1", 3Nb2, Sens. Actuator A Phys, pp.2022, 335[DOI]
- E. M. Sabolsky, "grain-oriented Pb(Mg1", 3Nb2, Ph.D., pp.PSU[DOI]
- M. M. Seabaugh, "Development of highly textured piezoelectric ceramics via templated grain growth", ISAF IEEE, 1, pp.377~380 (2000)
- S. Yang, "Full matrix electromechanical properties of textured Pb(In1", 2Nb1, 2Nb1, pp.2)O3-PbTiO3ceramic, J. Appl. Phys[DOI]
- A. D. Moriana, "Enhancing Electromechanical properties of Pb(Sc1", 2Nb1, Adv. Electron. Mater., pp.2022, 8(6)[DOI]
- H. Leng, "High performance high-power textured Mn", Cudoped PIN-PMN-PT ceramics, 2022, pp.234, 118015~
- c-textured PNN-PZT relaxor ferroelectric ceramics for electromechanical coupling devices, "Adv. Funct. Mater", 2020, 2001846~
- M. J. Brova, "Templated grain growth of high coercive field CuO-doped textured PYN-PMN-PT ceramics", J. Am. Ceram. Soc, 103(11), pp.6149~6156 (2020)
- S. F. Poterala, "Mechanistic interpretation of the aurivillius to perovskite topochemical microcrystal conversion process", Chem. Mater, 22(6), pp.2061~2068 (2010)
- F. K. Lotgering, "Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—I", J. inorg. nucl. chem, 9(2), pp.113~123 (1959)
- E. M. Sabolsky, "Dielectric and piezoelectric properties of < 001> fiber-textured 0. 675Pb(Mg1", 3Nb2, J. Appl. Phys, pp.2003, 93(7)[DOI]
- Y. Yan, "Templated grain Growth of <001>-textured 0. 675Pb(Mg1", 3Nb2, J. Am. Ceram. Soc, pp.2011, 94(6)[DOI]
- G. L. Messing, "Texture-engineered ceramic property enhancements through crystallographic tailoring", J. Mater. Res, 32(17), pp.3219~3241 (2017)
- J. L. Jones, "Domain Switching Anisotropy in Textured Bismuth Titanate Ceramics", J. Appl. Phys., 98(10), pp.104102~ (2005)
- Single Crystals, "한국세라믹학회지", 2018, 290~298, pp.한국세라믹학회
- V. Randle, "Introduction to texture analysis:macrotexture, microtexture, and orientation mapping", pp.75~122 (2003), CRC press
- J. L. Jones, "Texture and anisotropy of polycrystalline piezoelectrics", J. Am. Ceram. Soc, 90(8), pp.2297~2314 (2007)
- S. F. Poterala, "Processing, texture quality, and piezoelectric properties of <001>C textured (1-x)Pb(Mg1", 3Nb2, J. Appl. Phys., pp.2011, 110(1)[DOI]
- W. Jo, "Evolving morphotropic phase boundary in lead-free(Bi1", 2Na1, J. Appl. Phys., pp.2010, 109(1)[DOI]
- Y. Ehara, "Ultrafast switching of ferroelastic nanodomains in bilayered ferroelectric thin films", J. Appl. Phys., 90(18), pp.182906~ (2010)
- 조재현, "X선 기반 분광광도계를 통해 얻은 데이터 분석의 기초", 전기전자재료학회논문지, 35(3), pp.223~231 (2022), 한국전기전자재료학회
- 강우석, "압전재료의 기초 물성 측정", 전기전자재료학회논문지, 34(5), pp.301~313 (2021), 한국전기전자재료학회
- S. Yang, "Achieving both high electromechanical properties and temperature stability in textured PMN-PT ceramics", J. Am. Ceram. Soc, 105(5), pp.3322~3330 (2021)
- W. -S. Kang, "Bi-templated grain growth maximizing the effects of texture on piezoelectricity", J. Eur. Ceram. Soc, 41(4), pp.2482~2487 (2021)
