선박 및 해양구조물용 극저온 재료의 기계적 거동 특성
A Comparative Study on Mechanical Behavior of Low Temperature Application Materials for Ships and Offshore Structures
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
Austenite stainless steel(ASS), aluminum alloy and nickel steel alloy are the most widely used in many cryogenic applications due to superior mechanical properties at low temperature. The Face-Centered Cubic(FCC) and Hexagonal Close-Packed(HCP) materials are used for the primary and secondary insulation barrier of Liquefied Natural Gas(LNG) carrier tank and various kinds of LNG applications currently. In this study, tensile tests of ASS, aluminum alloy and nickel steel alloy were carried out for the acquisition of quantitative mechanical properties under the cryogenic environment. The range of thermal condition was room temperature to -163℃ and strain rate range was 0.00016/s to 0.01/s considering the dependencies of temperatures and strain rates. The comprehensive test data were analyzed in terms of the characteristics of mechanical behavior for the development of constitutive equation and its application
Abstract
Austenite stainless steel(ASS), aluminum alloy and nickel steel alloy are the most widely used in many cryogenic applications due to superior mechanical properties at low temperature. The Face-Centered Cubic(FCC) and Hexagonal Close-Packed(HCP) materials are used for the primary and secondary insulation barrier of Liquefied Natural Gas(LNG) carrier tank and various kinds of LNG applications currently. In this study, tensile tests of ASS, aluminum alloy and nickel steel alloy were carried out for the acquisition of quantitative mechanical properties under the cryogenic environment. The range of thermal condition was room temperature to -163℃ and strain rate range was 0.00016/s to 0.01/s considering the dependencies of temperatures and strain rates. The comprehensive test data were analyzed in terms of the characteristics of mechanical behavior for the development of constitutive equation and its application
참고문헌 (27)
- "ASTM B209M, ASTM International", ~ (2009)
- Babich, V.K, "Strain-Hardening Parameters Determined from the Stress- Strain Curve", Strength of Materials, 9(6), pp.704~707 (1977)
- Bang, K.W, "Korea Research Institute of Standards and Science", 84~123 (1989)
- Chatfield, D.A, "Strain Rate. Effects on Properties of High Strength Steels", pp.177~ (1981), SAE Warrendale
- "Experimental investigation on the impact behavior of membrane-type LNG carrier insulation system", JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 22, pp.901~907, ELSEVIER SCI LTD
- De, A.K, "Deformation-Induced Phase Transformation and Strain Hardening in Type 304 Austenitic Stainless Steel", Metallurgical and Materials Transactions A, 37(A), pp.1875~1886 (2006)
- Dieter, G.E, "Mechanical Metallurgy" (1976), Mcgraw-Hill
- Harris, F.S, "Safety features on LNG ships", Cryogenics, 33(8), pp.772~777 (1993)
- 홍진한, "극저온용 스테인레스 강의 저온거동 특성", 대한조선학회 논문집, 45(5), pp.530~537 (2008), 대한조선학회
- Klepaczko, J.R, "Advances in constitutive relations applied in computer codes", pp.88~98 (2009), Springer
- Korean Standards Information Center, "Korean industrial standard" (2006)
- Lee, K.J, "A new constitutive model of austenitic stainless steel for cryogenic applications", Computational Material Science, 46, pp.1152~1162 (2009)
- 이경준, "극저온 재료 성능분석을 위한 온도의존 손상모델 개발", 대한조선학회 논문집, 45(5), pp.538~546 (2008), 대한조선학회
- Mahmudi, R, "Strain rate sensitivity of a wrought Al-1.2%Fe alloy", Scripta Metall. Mater, 32, pp.2061~2065 (1995)
- Obst, B, "Experimental evidence on the dislocation mechanism of serrated yielding in f.c.c. metals and alloys at low temperatures", Materials Science and Engineering A, 137, pp.141~150 (1991)
- Olson, G.B, "Kinetics of strain-induced martensitic nucleation", Metallurgical and Materials Transactions A, 110(3), pp.791~795 (1975)
- Park, W.S, "Strain-rate Effects on the Mechanical Behavior of the AISI 300 Series of Austenitic Stainless Steel under Cryogenic Environments", Materials and Design, 31, pp.3630~3640 (2010)
- Patankar, S.N, "Strain rate insensitive plasticity in aluminum alloy 5083", Scripta Materialia, 38, pp.1255~1261 (1998)
- Pustovalov, V.V, "Serrated Deformation of Metals and Alloys at Low Temperatures", Low temperature physics, 34, pp.683~723 (2008)
- Reed, R.P, "Discontinuous Yielding in Austenitic Steels at Low Temperatures", Advances in Cryogenic Engineering, 36(B), pp.1077~1086 (1990)
- Schwaiger, R, "Some Critical Experiments on the Strain-Rate Sensitivity of Nanocrystalline Nickel", Acta Metall. Mater, 51, pp.5159~5172 (2003)
- Seeger, A, "The generation of lattice defects by moving dislocations and its application to the temperature dependence of the flow-stress of F.C.C. crystals", Philosophical Magazine, 46, pp.1194~1217 (1955)
- 2, "Handbuch der Physik, Vol. VII", pp.1958, Seeger, A
- Talonen, J, "Effect of Strain Rate on the Strain-Induced γ→α ´-Martensite Transformation and Mechanical Properties of Austenitic Stainless Steels", Metallurgical and Materials Transactions A, 36(A), pp.421~432 (2005)
- Thomas, M. F, "Cryogenic engineering", pp.257~291 (2005), Marcel Dekker, Inc
- Voorhees,H.R., "A Survey of Effects on Lower-Than-Usual Rates of Strain in the Yield and Tensile Strengths of Metals. ASTM Data Series DS44", ~ (1969)
- Yao, X.X, "The strain-rate Sensitivity of flow stress and work-hardening rate in a hot deformed Al-1.0 Mg alloy", Journal of materials science letters, 19(9), pp.743~744 (2000)