전자 서베잉을 이용한 서베이드 금관과 국소의치 프레임워크 디자인
Surveyed restoration and RPD framework design utilizing electronic surveying
0
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
구강 스캐너와 CAD/CAM 기술로 인해 컴퓨터로 제작하는 방식이 활발히 보급된 고정식 보철 증례와는 달리, 의치를 디지털 방식으로 제작하는 데에는 아직 한계가 많다. 촉각을 느낄 수 있는 입력 장비와 전자 서베잉의 개념, 그리고 쾌속 조형법의 적용으로 인해 국소의치를 디지털로 제작할 수 있는 솔루션이 최근 소개되고 있다. 본 증례보고에서는 이러한 국소의치의 디지털 솔루션을 이용하여 총 다섯 명의 환자에서 서베이드 금관 및 국소의치를 제작하였다. 인상 과정상의 문제로 모형과 실제 치아 사이의 형태적 차이가 있었던 경우를 제외하고는 국소의치의 적합도는 우수했으며, 장착 후 안정성과 착탈 시의 유지력 또한 임상에서 적용하는 데에 문제가 없었다.
Abstract
There are still many limitations on fabricating dentures using digital method while computerized production of fixed prostheses utilizing intraoral scanner and CAD/CAM technology has propagated rapidly. Recently the digital solution of fabricating removable partial denture by applying haptic input device, electronic surveying, and rapid prototyping was introduced. In this case presentation, five patients were treated with surveyed crown and removable partial dentures by this digital solution. Fit of dentures was excellent except for one case which showed morphological difference between the actual teeth and that of master cast by the erroneous impression process. There also was not any problem of stability and retention after adaptation in the clinical setting.
참고문헌 (12)
- Fasbinder DJ, "Clinical performance of chairside CAD", CAM restorations, 2006, pp.137, 22~31
- Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
- Han J, "A preliminary report of designing removable partial denture frameworks using a specifically developed software package", Int J Prosthodont, 23, pp.370~375 (2010)
- Eggbeer D, "The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks", Proc Inst Mech Eng H, 219, pp.195~202 (2005)
- Williams RJ, "A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying", J Prosthet Dent, 91, pp.85~88 (2004)
- Williams RJ, "Use of CAD", CAM technology to fabricate a removable partial denture framework, 2006, pp.96, 96~99
- Williams RJ, "CAD", CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts, 2004, pp.2, 268~276
- Bibb RJ, "Trial fitting of a removable partial denture framework made using computeraided design and rapid prototyping techniques", Proc Inst Mech Eng H, 220, pp.793~797 (2006)
- Pham DT, "A comparison of rapid prototyping technologies", Int J Mach Tool Manuf, 38, pp.1257~1287 (1998)
- Yadroitsev I, "Parametric analysis of the selective laser melting process", Appl Surf Sci, 253, pp.8064~8069 (2007)
- Kibi M, "Development of an RPD CAD system with finite element stress analysis", J Oral Rehabil, 36, pp.442~450 (2009)
- Sun Y, "Study on CAD&RP for removable complete denture", Comput Methods Programs Biomed, 93, pp.266~272 (2009)