부분 프로펠러 날개 모형을 이용한 높은 레이놀즈 수에서의 공동시험
Cavitation Test at High Reynolds Number Using a Partial Propeller Blade Model
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7Rto tip with expanded profile and with adjustable device of angle of attack. Reynold’s number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold’s number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.
Abstract
As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7Rto tip with expanded profile and with adjustable device of angle of attack. Reynold’s number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold’s number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.
참고문헌 (10)
- Arndt Roger E.A., "Cavitation in Vortical Flows", Annu. Rev. Fluid Mech, 34, pp.143~175 (2002)
- ITTC, "The Specialist Committee on Cavitation Erosion on Propellers and Appendages on High Powered", High Speed Ships: Final Report and Recommendations to the 24th ITTC, 2005, pp.통권 : 2, 209~542
- Jung J.K., "Effect of Leading Edge Roughness on Cavitation Pattern and Fluctuating Pressure Amplitudes", Proceedings of the Annual Spring Meeting, pp.523~528 (2004)
- Junglewitz A., "Cavitation Erosion – Damages and Countermeasures from a Classification Service Providers Point of View" (2003), STG Sprechtag Cavitation
- Kerwin J.E., "Prediction of Steady and Unsteady Marine Propeller Performance by Numerical Lifting-Surface Theory", Trans. SNAME, 86, pp.218~253 (1978)
- Kim K.S., "Effect of Reynolds Number, Leading Edge Roughness and Air Content on the Cavitation Performance of Model Propellers", Journal of the Society of Naval Architects of Korea, 37(1), pp.10~25 (2000)
- Kinnas S., "A Nonlinear Boundary Element Method for Analysis of Unsteady Propeller Sheet Cavitation", Proceeding 19th Symposium on Naval Hydrodynamics, pp.717~737
- Cavitation Inception on Ship Propeller Models, "Kuiper G.", ~, pp.Report of Netherlands Ship Model Basin. Publ. No. 655. (1981)
- Song I.H., "Influence of the Leading Edge Shape of a 2-Dimensional Hydrofoil on Cavitation Characteristics", Journal of the Society of Naval Architects of Korea, 37(1), pp.60~66 (2000)
- Yamaguchi H., "Cloud Cavitation on Foil Sections", International Symposium on Cavitation CAV2006 (2006)