서로 다른 스캔 방식을 이용하여 CAD/CAM에 의해제작된 코핑의 변연 및 내면의 적합성
Marginal and Internal Fit of Copings Made by CAD/CAM using Different Scanning Methods
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
구강내 스캔(Group 1), 모델 광학 스캔(Group 2)과 모델 접촉식 스캔(Group 3)방식으로 각각 zirconia 코핑을 제작하여 광학 현미경으로 적합성을 관찰하였다. 측정항목은 변연오차(absolute marginal discrepancy;AMD), 변연간극(marginal gap; MG), 측방간격(gap of axial wall; GA), 선각간격(gap of line angle; GL)와 교합간격(gap of occusal surface; GO)이었으며, 결과는 아래와 같았다. 1. Group 1, Group 2, Group 3의 평균 AMD는 각 각 141.21±42.94 ㎛, 140.63±31.64 ㎛, 109.37±28.42 ㎛이고,Group1, Group 2, Group 3의 MG는 각 각 82.52±43.99 ㎛, 90.28±27.93 ㎛, 66.55±28.77 ㎛였다. AMD와 MG는각 그룹에서 통계학적으로 유의한 차이를 보여주지 않았다(Anova test, P>0.05). 2. Group 2의 GA가 Group 1과 Group 3에 비해 통계학적으로 유의하게 적은 수치를 나타내었다(Anova test,P<0.05). 3. Group 1의 GL과 GO가 다른 그룹에 비해 통계학적으로 높은 수치를 나타내었다(Mann-whitney test(P<0.05). 세 가지 스캔 방식으로 제작된 zirconia 코핑은 세라믹 보철의 가장 중요한 평가 요소인 AMD와 MG에서 서로통계학적 차이를 보이지 않았다.
Abstract
The purpose of this study is to evaluate the marginal and internal fit of coping made by CAD/CAM using different scanning methods. Zirconia coping was made by each CAD/CAM system followed by intra-oral scanning, model optical scanning and model contact scanning. It was embedded into Epoxy Resin and was cut by buccal to lingual. AMD (Absolute marginal discrepancy), MG (Marginal gap), GA (Gap of axial), GL (Gap of line angle) and GO (Gap of occlusal) of each sample were measured. The result is as followed; 1. The mean value of AMD in Group 1, Group 2, Group 3 are 141.21±42.94 ㎛m, 140.63±31.64 ㎛, 109.37±28.42 ㎛. The averages of MG in Group 1, Group 2, Group 3 are 82.52±43.99 ㎛, 90.28±27.93 ㎛,66.55±28.77 ㎛. Statistically there is no difference in AMD and MG among the three Groups (Anova, P>0.05). 2. GA of Group 2 revealed statistically difference compared with Group 1 and Group 3 (Anova, P<0.05). 3. GL and GO of Group 1 showed statistically significant differences compared with Group 2 and Group 3 (Mann-whitney test (P<0.05). Zirconia copings made by 3 ways of scanning methods have no difference with conventional ceramics in AMD and MG which are known as the most important factors.
참고문헌 (23)
- Reich SM, "Clinical performance of large, all-ceramic CAD", CAM-generated restorations after three years: a pilot study, 2004, pp.135, 605~612
- Mormann WH, "Chair side computer-aided direct ceramic inlays", Quintessence Int, 20, pp.329~339 (1989)
- Duret F, "CAD", CAM imaging in dentistry, 1991, pp.1, 150~154
- Rekow ED, "Dental CAD", CAM systems: what is the state of the art?, 1991, pp.122, 43~48
- Miyazaki T, "A review of dental CAD", CAM: current status and future perspectives from 20 years of experience, 2009, pp.28, 44~56
- Duret F, "CAD", CAM imaging in dentistry, 1991, pp.1, 150~154
- Goodacre CJ, "CAD", CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data, 2012, pp.107, 34~46
- Beuer F, "Digital dentistry: an overview of recent developments for CAD", CAM generated restorations, 2008, pp.10, 204~511
- Besimo CE, "Computerassisted generation of all-ceramic crowns and fixed partial dentures", Int J Comput Dent, 4, pp.43~62 (2001)
- Suttor D, "LAVA-the system for all-ceramic ZrO2 crowns and bridge frameworks", Int J Comput Dent, 4, pp.195~206 (2001)
- Jacobs MS, "An investigation of dental luting cement solubility as a function of the marginal gap", J Prosthet Dent, 65, pp.436~442 (1991)
- Knoernschild KL, "Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures", J Prosthet Dent, 84, pp.492~498 (2000)
- Sailer I, "Five-year clinical results of zirconia frameworks for posterior fixed partial dentures", Int J Prosthodont, 20, pp.383~388 (2007)
- Christensen GJ, "Marginal fit of gold inlay castings", J Prosthet Dent, 16, pp.297~305 (1966)
- Mitchell CA, "Nondestructive, in vitro quantification of crown margins", J Prosthet Dent, 85, pp.575~584 (2001)
- May KB, "Precision of fit: the Procera AllCeram crown", J Prosthet Dent, 80, pp.394~404 (1998)
- Beuer F, "Precision of fit: zirconia three-unit fixed dental prostheses", Clin Oral Investig, 13, pp.343~349 (2009)
- McLean JW, "The estimation of cement film thickness by an in vivo technique", Br Dent J, 131, pp.107~111 (1971)
- Kokubo Y, "Clinical marginal and internal gaps of Procera AllCeram crowns", J Oral Rehabil, 32, pp.526~530 (2005)
- Reich S, "Clinical fit of four-unit zirconia posterior fixed dental prostheses", Eur J Oral Sci, 116, pp.579~584 (2008)
- Borba M, "Adaptation of all-ceramic fixed partial dentures", Dent Mater, 27, pp.1119~1126 (2011)
- Martl′nez-Rus F, "Evaluation of the absolute marginal discrepancy of zirconia-based ceramic copings", J Prosthet Dent, 105, pp.108~114 (2011)
- Quintas AF, "and luting agents : an in vitro evaluation", J Prosthet Dent, 92, pp.250~257 (2004)