디지털 구강스캐너로 모형 없이 제작한 전부지르코니아 수복물의 변연 및 내면 적합도 평가
Evaluation of marginal and internal gap under model-free monolithic zirconia restoration fabricated by digital intraoral scanner
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
목적: 본 연구의 목적은 실제 환자에서 디지털 구강스캐너로 모형 없이 제작한 보철물의 변연 및 내면 적합도를 평가하는 것이다. 대상 및 방법: 전향적 임상시험으로 시행한 본 예비 연구는 총 11개의 수복물을 대상으로 하였다. 구강스캐너(TRIOS, 3shape, Copenhagen, Denmark)로 디지털 구강인상을 채득한 후, 캐드 디자인 및 밀링 가공 과정을 통해 전부지르코니아 수복물을 제작하였다. 완성된 지르코니아관을 환자 구강 내에 시적하였고, 레플리카 술식으로 보철물-지대치 복제물을 얻었다. 이를 근원심, 협설 방향으로 잘라 변연오차, 변연간극과 축벽부, 선각부, 교합면부의 내면간극을 측정하였다. 통계처리는 Kruskal-Wallis 검정과 Mann-Whitney U 검정을 이용하여 통계적 유의성을 분석하였다(α=.05). 결과: 복제물을 통한 적합도 분석 결과, 근원심, 협설 절편 사이에는 통계적으로 유의한 차이가 없었다(P>.05). 변연간극에 불일치가 있었으며, 변연오차가 변연간극 보다 컸다(P<.01). 결론: 본 연구의 한계 내에서, 구강스캐너로 모형 없이 제작한 전부지르코니아 수복물의 적합도는 임상적으로 허용할만한 결과를 보였다. 그러나 지르코니아관의 변연부위가 과풍융되는 경향이 있었으므로 주의 깊은 임상 적용 및 추적 연구가 요구된다.
Abstract
Purpose: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. Materials and methods: A prospective clinical trial was performed on 11 restorations as a pilot study. The monolithic zirconia restorations were fabricated after digital intraoral impression taking by intraoral scanner (TRIOS, 3shape, Copenhagen, Denmark), computer-aided designing, and milling manufacturing process. Completed zirconia crowns were tried in the patients' mouth and a replica technique was used to acquire the crown-abutment replica. The absolute marginal discrepancy, marginal gap, and internal gap of axial, line angle, and occlusal part were measured after sectioning the replica in the mesiodistal and buccolingual direction. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U test (α=.05). Results: From the adaptation analysis by replica, the statistically significant difference was not found between mesiodistal and buccolingual sections (P>.05), but there was significant difference among the measurement location (P<.01). The amount of absolute marginal discrepancy was larger than those of marginal gap and internal gap (P<.01). Conclusion: Within the limitations of this study, the adaptation accuracy of model-free monolithic zirconia restoration fabricated by intraoral scanner exhibited clinically acceptable result. However, the margin of zirconia crown showed tendency of overcontour and cautious clinical application and follow up is necessary.
참고문헌 (34)
- Vagkopoulou T, "Zirconia in dentistry:Part 1. Discovering the nature of an upcoming bioceramic", Eur J Esthet Dent, 4, pp.130~151 (2009)
- Piconi C, "Zirconia as a ceramic biomaterial", Biomaterials, 20, pp.1~25 (1999)
- Covacci V, "In vitro evaluation of the mutagenic and carcinogenic power of high purity zirconia ceramic", Biomaterials, 20, pp.371~376 (1999)
- Koutayas SO, "Zirconia in dentistry: part 2. Evidence-based clinical breakthrough", Eur J Esthet Dent, 4, pp.348~380 (2009)
- Raigrodski AJ, "The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses:a prospective clinical pilot study", J Prosthet Dent, 96, pp.237~244 (2006)
- Roediger M, "Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results", Int J Prosthodont, 23, pp.141~148 (2010)
- Rinke S, "Prospective evaluation of zirconia posterior fixed partial dentures: 7-year clinical results", Int J Prosthodont, 26, pp.164~171 (2013)
- Sailer I, "Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up", Int J Prosthodont, 22, pp.553~560 (2009)
- Albashaireh ZS, "Two-body wear of different ceramic materials opposed to zirconia ceramic", J Prosthet Dent, 104, pp.105~113 (2010)
- 정유석, "A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain", The Journal of Advanced of Prosthodontics, 2(3), pp.111~115 (2010), 대한치과보철학회
- Suttor D, "LAVA--the system for all-ceramic ZrO2 crown and bridge frameworks", Int J Comput Dent, 4, pp.195~206 (2001)
- Filser F, "Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM)", Int J Comput Dent, 4, pp.89~106 (2001)
- Ender A, "Full arch scans: conventional versus digital impressions-an in-vitro study", Int J Comput Dent, 14, pp.11~21 (2011)
- Seelbach P, "Accuracy of digital and conventional impression techniques and workflow", Clin Oral Investig, 17, pp.1759~1764 (2013)
- Reich S, "Clinical fit of allceramic three-unit fixed partial dentures, generated with three different CAD", CAM systems, 2005, pp.113, 174~179
- Laurent M, "Clinical evaluation of the marginal fit of cast crowns-validation of the silicone replica method", J Oral Rehabil, 35, pp.116~122 (2008)
- Rahme HY, "In vitro evaluation of the 'replica technique' in the measurement of the fit of Procera crowns", J Contemp Dent Pract, 9, pp.25~32 (2008)
- Kohorst P, "Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses", J Oral Rehabil, 37, pp.283~291 (2010)
- Reich S, "Measurement of cement thickness under lithium disilicate crowns using an impression material technique", Clin Oral Investig, 15, pp.521~526 (2011)
- Syrek A, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling", J Dent, 38, pp.553~559 (2010)
- Holmes JR, "Considerations in measurement of marginal fit", J Prosthet Dent, 62, pp.405~408 (1989)
- McLean JW, "The estimation of cement film thickness by an in vivo technique", Br Dent J, 131, pp.107~111 (1971)
- Schaerer P, "A comparison of the marginal fit of three cast ceramic crown systems", J Prosthet Dent, 59, pp.534~542 (1988)
- Pera P, "In vitro marginal adaptation of alumina porcelain ceramic crowns", J Prosthet Dent, 72, pp.585~590 (1994)
- Groten M, "Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopic analysis in vitro", J Oral Rehabil, 24, pp.871~881 (1997)
- Sulaiman F, "A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns", Int J Prosthodont, 10, pp.478~484 (1997)
- Boening KW, "Clinical fit of Procera AllCeram crowns", J Prosthet Dent, 84, pp.419~424 (2000)
- Suarez MJ, "Comparison of the marginal fit of Procera AllCeram crowns with two finish lines", Int J Prosthodont, 16, pp.229~232 (2003)
- Yeo IS, "In vitro marginal fit of three all-ceramic crown systems", J Prosthet Dent, 90, pp.459~464 (2003)
- Bindl A, "Marginal and internal fit of all-ceramic CAD", CAM crown-copings on chamfer preparations, 2005, pp.32, 441~447
- Nakamura T, "In vitro study on marginal and internal fit of CAD", CAM all-ceramic crowns, 2005, pp.24, 456~459
- Brawek PK, "The clinical accuracy of single crowns exclusively fabricated by digital workflow--the comparison of two systems", Clin Oral Investig, 17, pp.2119~2125 (2013)
- Park JM, "Clinical evaluations of cast gold alloy, machinable zirconia, and semiprecious alloy crowns: A multicenter study", J Prosthet Dent, 115, pp.684~691 (2016)
- Kohorst P, "Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided design", computer-aided manufacturing systems, 2009, pp.117, 319~325