본문 바로가기
KERD
논문KCI 등재

하악 구치 단일임플란트 수복에서 임플란트 길이에 따른 치관-임플란트 비율이 임플란트안정성 및 변연골소실에 주는 영향

Influence of crown-to-implant ratio of short vs long implants on implant stability and marginal bone loss in the mandibular single molar implant

김명주|김봉주|권호범|임영준|백연화
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2018.12|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제34권 제4호|pp. 280-289|DOI https://doi.org/10.14368/jdras.2018.34.4.280

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

immediate loadingdental implants치과임플란트marginal bone lossprimary stability짧은 치과임플란트즉시부하초기안정성임플란트 변연골소실치관-임플란트 비율(crown-toimplant ratio)short dental implantscrown to implant ratio
주제분류치의학

초록

목적: 이 연구의 목적은 임플란트의 길이 및 치관-임플란트 비율(crown-to-implant (C/I) ratio)이 임플란트의 안정성과 임플란트 변연골 소실량(MBL)에 영향을 주는지 알아보기 위함이다. 연구 재료 및 방법: 연구대상자로 하악 구치부에 단일치를 상실한 46명의 환자를 선별하였다. 대조군에는 총 19개의 직경 5.0 mm, 길이 10 mm의 임플란트(CMI IS-III active® long implant)를 식립하였고, 실험군에는 직경 5.5 mm, 길이 6.6, 7.3, 8.5 mm의 임플란트 총 27개(CMI IS-III active® short implant)를 식립하였다. 각각의 임플란트는 디지털 방식으로 술 전 제작한 수술가이드를 사용하여 식립하였고 임시보철물을 장착하여 즉시부하를 시행하였다. 술 후 3개월에 CADCAM 방식으로 제작한 지르코니아 크라운으로 최종 수복하였다. 술 후 48주에 ISQ 값과 변연골 소실량을 측정하여 치관-임플란트 비율과 ISQ 및 변연골 소실량 간의 상관관계를 비교하였다. 결과: 두 그룹 모두 안정도 및 변연골 소실량 면에서 성공적인 결과를 나타내었다. 술 후 48주에 측정한 두 그룹간 ISQ와 변연골 소실량 값은 통계적으로 유의미한 차이가 없었다(P > 0.05). 치관-임플란트 비율과 안정성 및 치관-임플란트 비율과 변연골 소실량 간에 어떤 상관관계도 관찰되지 않았다(P > 0.05). 결론: 두 그룹의 하악 단일 임플란트에서 치관-임플란트 비율은 안정성 및 변연골 소실량에 영향을 주지 않는 것으로 나타났다. 골높이가 부족한 하악에서 단일 임플란트 수복 시, 짧은 임플란트는 상대적으로 높은 치관-임플란트 비율에도 불구하고 제한된 조건 하에서 적절한 대안이 될 수 있다.

Abstract

Purpose: The purpose of this randomized clinical trial is to determine whether implant length and the crown-to-implant (C/I) ratio influence implant stability and peri-implant marginal bone loss (MBL). Materials and Methods: 46 patients with single tooth missing in the posterior molar region of the mandible were included in this study. 19 implants (CMI IS-III active® long implant) of 5.0 mm diameter and 10 mm length were installed for the control group, while 27 implants (CMI IS-III active® short implant) of 5.5 mm diameter and 6.6, 7.3 or 8.5 mm length were placed for the experimental group. Each implant was inserted and immediately loaded using the digitally pre-fabricated surgical template and provisional restoration. The CAD-CAM monolithic zirconia crown was fabricated at 3 months after the surgery as a definitive restoration. The ISQ value and the MBL was measured at 48 weeks after the surgery. The correlation between the C/I ratio, MBL, and secondary implant stability was analyzed. Results: Successful results in terms of ISQ and MBL were achieved with both groups. There was no significant difference between the groups in terms of ISQ values and MBL at 48 weeks after the surgery (P > 0.05). No significant correlation was found between the C/I ratio and secondary stability as well as the C/I ratio and the MBL (P > 0.05). Conclusion: The influence of C/I ratio in both groups was not shown on the stability nor the marginal bone loss in implants supporting single crown of the mandible. Short implant could be a preferable alternative option in the reduced bone height mandible under the limited condition despite its higher C/I ratio.

참고문헌 (50)

  1. Urban IA, "Vertical ridge augmentation using guided bone regeneration (GBR) in three clinical scenarios prior to implant placement: a retrospective study of 35 patients 12to 72 months after loading", Int J Oral Maxillofac Implants, 24, pp.502~510 (2009)
  2. Bahat O, "Brånemark system implants in the posterior maxilla: clinical study of 660 implants followed for 5 to 12 years", Int J Oral Maxillofac Implants, 15, pp.646~653 (2000)
  3. Herrmann I, "Evaluation of patient and implant characteristics as potential prognostic factors for oral implant failures", Int J Oral Maxillofac Implants, 20, pp.220~230 (2005)
  4. Naert I, "Biologic outcome of implant-supported restorations in the treatment of partial edentulism. Part 1: a longitudinal clinical evaluation", Clin Oral Implants Res, 13, pp.381~389 (2002)
  5. Kotsovilis S, "A systematic review and meta-analysis on the effect of implant length on the survival of rough-surface dental implants", J Periodontol, 80, pp.1700~1718 (2009)
  6. Mangano FG, "Short (8-mm) locking-taper implants supporting single crowns in posterior region: a prospective clinical study with 1-to 10-years of followup", Clin Oral Implants Res, 25, pp.933~940 (2014)
  7. Rossi F, "Use of short implants (6 mm) in a single-tooth replacement: a 5-year follow-up prospective randomized controlled multicenter clinical study", Clin Oral Implants Res, 27, pp.458~464 (2016)
  8. Esposito M, "A 3-year post-loading report of a randomised controlled trial on the rehabilitation of posterior atrophic mandibles: short implants or longer implants in vertically augmented bone?", Eur J Oral Implantol, 4, pp.301~311 (2011)
  9. Romeo E, "The use of short dental implants in clinical practice: literature review", Minerva Stomatol, 59, pp.23~31 (2010)
  10. Telleman G, "A systematic review of the prognosis of short (<10 mm) dental implants placed in the partially edentulous patient", J Clin Periodontol, 38, pp.667~676 (2011)
  11. Grossmann Y, "The prosthodontic concept of crown-to-root ratio: a review of the literature", J Prosthet Dent, 93, pp.559~562 (2005)
  12. Jung RE, "A systematic review of the 5-year survival and complication rates of implantsupported single crowns", Clin Oral Implants Res, 19, pp.119~130 (2008)
  13. Rosenstiel SF, "Contemporary Fixed Prosthodontics", pp.42~81 (2006), Elsevier
  14. Schillingburg HT, "Fundamentals of fixed prosthodontics", pp.85~103 (1997), Quintessence
  15. Pommer B, "How much bone loss can be prevented by alveolar ridge preservation? Systematic literature review and meta-analysis", ImplantNewsPerio, 9, pp.795~799 (2012)
  16. Simons WF, "The proportion of cancellous bone as predictive factor for early marginal bone loss around implants in the posterior part of the mandible", Clin Oral Implants Res, 26, pp.1051~1059 (2015)
  17. Weber HP, "A 5-year prospective clinical and radiographic study of nonsubmerged dental implants", Clin Oral Implants Res, 11, pp.144~153 (2000)
  18. Albrektsson T, "The long-term efficacy of currently used dental implants: a review and proposed criteria of success", Int J Oral Maxillofac Implants, 1, pp.11~25 (1986)
  19. Bulaqi HA, "Effect of increased crown height on stress distribution in short dental implant components and their surrounding bone: A finite element analysis", J Prosthet Dent, 113, pp.548~557 (2015)
  20. Toniollo MB, "Three-dimensional finite element analysis of the stress distribution on morse taper implants surface", J Prosthodont Res, 57, pp.206~212 (2013)
  21. Cinar D, "The Effect of Three Different Crown Heights and Two Different Bone Types on Implants Placed in the Posterior Maxilla:Three-Dimensional Finite Element Analysis", Int J Oral Maxillofac Implants, 31, pp.e1~e10 (2016)
  22. Malchiodi L, "Influence of crown-implant ratio on implant success rates and crestal bone levels: a 36-month follow-up prospective study", Clin Oral Implants Res, 25, pp.240~251 (2014)
  23. Hingsammer L, "The influence of crown-to-implant ratio on marginal bone levels around splinted short dental implants: A radiological and clincial short term analysis", Clin Implant Dent Relat Res, 19, pp.1090~1098 (2017)
  24. Blanes RJ, "To what extent does the crown-implant ratio affect the survival and complications of implant-supported reconstructions? A systematic review", Clin Oral Implants Res, 20(Suppl 4), pp.67~72 (2009)
  25. Hof M, "Influence of prosthetic parameters on peri-implant bone resorption in the first year of loading: a multi-factorial analysis", Clin Implant Dent Relat Res, 17(Suppl 1), pp.e183~e191 (2015)
  26. Tawil G, "Influence of prosthetic parameters on the survival and complication rates of short implants", Int J Oral Maxillofac Implants, 21, pp.275~282 (2006)
  27. Mangano F, "The Effect of Crownto-Implant Ratio on the Clinical Performance of Extra-Short Locking-Taper Implants", J Craniofac Surg, 27, pp.675~681 (2016)
  28. Lai HC, "Stability of implants placed in different bone types", Zhonghua Kou Qiang Yi Xue Za Zhi, 42, pp.292~293 (2007)
  29. Turkyilmaz I, "Biomechanical aspects of primary implant stability:a human cadaver study", Clin Implant Dent Relat Res, 11, pp.113~119 (2009)
  30. Östman PO, "Resonance frequency analysis measurements of implants at placement surgery", Int J Prosthodont, 19, pp.77~83 (2006)
  31. Robling AG, "Mechanical Signaling for Bone Modeling and Remodeling", Crit Rev Eukaryot Gene Expr, 19, pp.319~338 (2009)
  32. Norton MR, "The influence of insertion torque on the survival of immediately placed and restored single-tooth implants", Int J Oral Maxillofac Implants, 26, pp.1333~1343 (2011)
  33. Bornstein MM, "Bone apposition around two different sandblasted and acid-etched titanium implant surfaces: a histomorphometric study in canine mandibles", Clin Oral Implants Res, 19, pp.233~241 (2008)
  34. Buser D, "Enhanced bone apposition to a chemically modified SLA titanium surface", J Dent Res, 83, pp.529~533 (2004)
  35. Schwarz F, "Histological and immunohistochemical analysis of initial and early osseous integration at chemically modified and conventional SLA® titanium implants: preliminary results of a pilot study in dogs", Clin Oral Implants Res, 18, pp.481~488 (2007)
  36. Klokkevold PR, "Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit", Clin Oral Implants Res, 8, pp.442~447 (1997)
  37. Piattelli A, "Histologic and histomorphometric analysis of the bone response to machined and sandblasted titanium implants: an experimental study in rabbits", Int J Oral Maxillofac Implants, 13, pp.805~810 (1998)
  38. Yeo IS, "Biomechanical and histomorphometric study of dental implants with different surface characteristics", J Biomed Mater Res B Appl Biomater, 87, pp.303~311 (2008)
  39. Kim JH, "Retrospective results of implants for partially edentulous posterior jaws according to time points of early loading", Int J Oral Maxillofac Implants, 28, pp.1293~1299 (2013)
  40. Kumar ABT, "Peri-implant crestal bone preservation:Where do we stand?", Int J Oral Implantol Clin Res, 4, pp.72~77 (2013)
  41. 류효숙, "The influence of thread geometry on implant osseointegration under immediate loading: a literature review", The Journal of Advanced of Prosthodontics, 6(6), pp.547~554 (2014), 대한치과보철학회[DOI]
  42. Langer B, "The wide fixture: a solution for special bone situations and a rescue for the compromised implant. Part 1", Int J Oral Maxillofac Implants, 8, pp.400~408 (1993)
  43. Renouard F, "Five-mmdiameter implants without a smooth surface collar:report on 98 consecutive placements", Int J Oral Maxillofac Implants, 14, pp.101~107 (1999)
  44. Horwitz J, "Resonance frequency analysis in immediate loading of dental implants", Refuat Hapeh Vehashinayim (1993), 20, pp.80~104 (2003)
  45. Anitua E, "Influence of implant length, diameter, and geometry on stress distribution: a finite element analysis", Int J Periodontics Restorative Dent, 30, pp.89~95 (2010)
  46. Baggi L, "Comparative Evaluation of Osseointegrated Dental Implants Based on Platform-Switching Concept:Influence of Diameter, Length, Thread Shape, and In-Bone Positioning Depth on Stress-Based Performance", Comput Math Methods Med, 2013, pp.250929~ (2013)
  47. Simunek A, "Changes in stability after healing of immediately loaded dental implants", Int J Oral Maxillofac Implants, 25, pp.1085~1092 (2010)
  48. Dominiak M, "New perspectives in the diagnostic of gingival recession", Adv Clin Exp Med, 23, pp.857~863 (2014)
  49. Yazicioglu D, "Stress Distribution on Short Implants at Maxillary Posterior Alveolar Bone Model with Different Bone-to-Implant Contact Ratio: Finite Element Analysis", J Oral Implantol, 42, pp.26~33 (2016)
  50. Zietek M, "Long term evaluation of biomaterial application in surgical treatment of periodontosis", J Physiol Pharmacol, 59(Suppl 5), pp.81~86 (2008)

관련 논문AI추천

구치부에서 짧은 길이 임플란트의 임상적 효용성에 대한 고찰홍지연대한치과의사협회 · 대한치과의사협회지2021 · 제59권 제4호제1대구치 위치에 식립된 단일 임플란트의 지대주 연결 유형에 따른 임플란트 주위골 흡수김옥수, 이석현, 이은우, 정하나대한턱관절교합학회 · 구강회복응용과학지2023 · 제39권 제1호기능적 부하 후“Short Implant”주변의 골 흡수에 대한 방사선학적 연구강태인, 남정훈, 노경록, 박미희, 박영주, 안장훈, 연병무, 유우근, 이정원대한치과의사협회 · 대한치과의사협회지2010 · 제48권 제8호위축된 상악구치부에서 두 개의 짧은 임플란트지지형 단일치관의 임상연구박찬진, 송호용, 조리라, 허윤혁대한치과의사협회 · 대한치과의사협회지2015 · 제53권 제9호짧은 임플란트의 생존율에 관한 고찰김원, 김승미, 오남식, 이은정, 최지영대한치과보철학회 · 대한치과보철학회지2009 · 제47권 제4호하악 제1, 2대구치 단일 임플란트의 생존율에 관한 연구이상한, 정택균, 조진현, 팽준영대한치과보철학회 · 대한치과보철학회지2013 · 제51권 제4호

이 간행물의 다른 논문 (10건)

이갈이와 편심위 교합간섭의 상관관계 분석김미경, 이경제, 김희중, 이호선, 진수윤pp. 253-261총의치의 납의치 상에서 치은 형성 시행 후에 나타나는 시간에 따른 인공 치아 이동에 대한 평가이세한, 곽영훈, 김희중pp. 262-269디지털 인상법과 종래인상법을 동시에 경험한 임상시험자를 대상으로 한 설문지분석양은비, 김봉주, 이승표, 임영준, 이준재pp. 270-279레진계 치아 스플린팅 재료들의 중합능력 평가조경모, 김진우, 김수연, 박세희, 이재관, 이정길pp. 290-296Stress distribution of molars restored with minimal invasive and conventional technique: a 3-D finite element analysis김선미, 김재환, 최남기, 양선미, 양성표, 양홍서pp. 297-305
원문 보기