Electrochemically polyaniline-coated microextraction needle for phthalates in water
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A stainless-steel needle (Hamilton 90022, 22 gauge, 718-μm o.d., 413-μm i.d., 51-mm length, bevel tip) with an electrochemically coated polyaniline layer having a microbore tunnel was newly prepared as a device for headspace in-needle microextraction. For designing the needle, the polyaniline layer length was optimized, and to evaluate the extraction efficiency for polycyclic aromatic hydrocarbons, numerous cyclic voltammetry scans were conducted. In addition, the optimization of the analytical conditions (including the adsorption and desorption parameters) and the validation of the analytical method were conducted. The optimized adsorption and desorption conditions were 40 °C for 30 min and 230 °C for 60 s, respectively. Finally, in this study, a polyaniline layer was electrochemically deposited on the in-needle surface, and it exhibited good thermal stability. The needle with the polyaniline layer was repeatedly used more than 200 times during this study. This method has some advantages in terms of the extraction time, extraction efficiency, and analysis cost.
Abstract
A stainless-steel needle (Hamilton 90022, 22 gauge, 718-μm o.d., 413-μm i.d., 51-mm length, bevel tip) with an electrochemically coated polyaniline layer having a microbore tunnel was newly prepared as a device for headspace in-needle microextraction. For designing the needle, the polyaniline layer length was optimized, and to evaluate the extraction efficiency for polycyclic aromatic hydrocarbons, numerous cyclic voltammetry scans were conducted. In addition, the optimization of the analytical conditions (including the adsorption and desorption parameters) and the validation of the analytical method were conducted. The optimized adsorption and desorption conditions were 40 °C for 30 min and 230 °C for 60 s, respectively. Finally, in this study, a polyaniline layer was electrochemically deposited on the in-needle surface, and it exhibited good thermal stability. The needle with the polyaniline layer was repeatedly used more than 200 times during this study. This method has some advantages in terms of the extraction time, extraction efficiency, and analysis cost.
참고문헌 (35)
- P. Tsai, , Sci. Total Environ, 278(1-3), pp.137~150 (2001)
- A. Bhargava, , Atmos. Environ, 38(28), pp.4761~4767 (2004)
- E. Yoon, , Hum. Ecol. Risk Assess, 13(3), pp.669~680 (2007)
- P. Baumard, , Environ. Toxicol. Chem, 17(5), pp.765~776 (1998)
- E. Manoli, , Trends Anal. Chem, 18(6), pp.417~428 (1999)
- D. Zuazagoitia, , Chromatographia, 66(9), pp.773~777 (2007)
- J. Cho, , Environ. Monit. Assess, 149, pp.385~393 (2009)
- E. J. Kim, , Environ. Sci. Pollu. R, 18(9), pp.1508~1517 (2011)
- R. J. Law, , Mar. Pollut. Bull, 34(5), pp.306~322 (1997)
- F. Sun, , Anal. Chim. Acta, 364, pp.1~11 (1998)
- C. M. Reddy, , Mar. Pollut. Bull, 38, pp.126~135 (1999)
- G. Kiss, , J. Chromatogr. A, 725, pp.261~272 (1996)
- U. H. Yim, , Korea. Sci. Total Environ, 470, pp.1485~1493 (2014)
- H. Son, , Anal. Chim. Acta, 751, pp.86~93 (2012)
- 전혜림, "Use of Polyacrylic Acid and Polydimethylsiloxane Mixture for In-Needle Microextraction of Volatile Aroma Compounds in Essential Oils", Bulletin of the Korean Chemical Society, 36(11), pp.2730~2739 (2015), 대한화학회[DOI]
- Y. Bang, , J. Sep. Sci, 40(19), pp.3839~3847 (2017)
- S. Lee, , Food Anal. Methods, 11(10), pp.2767~2777 (2018)
- H. Bagheri, , J. Chromatogr. A, 1152(1-2), pp.168~174 (2007)
- H. Bagheri, , J. Chromatogr. A, 1238, pp.22~29 (2012)
- X. Li, , J. Chromatogr. A, 1135, pp.101~108 (2006)
- H. Bagheri, , J. Chromatogr. A, 986(1), pp.111~119 (2003)
- D. Djozan, , Chromatographia, 59(1-2), pp.95~99 (2004)
- M. Mousavi, , Anal. Chim. Acta, 581, pp.71~77 (2007)
- B. Wang, , Synth. Met, 13(4), pp.329~334 (1986)
- W. Huang, , J. Chem. Soc., Faraday Trans. 1, 82(8), pp.2385~2400 (1986)
- R. Qian, , Polym. J, 19(1), pp.157~172 (1987)
- J. Desilvestro, , J. Mater. Chem, 3(3), pp.263~272 (1993)
- L. J. Duić, , J. Polym. Sci. Poly. Chem, 32(1), pp.105~111 (1994)
- G. Zotti, , J. Electroanal. Chem, 239(1-2), pp.387~396 (1988)
- D. Louch, , Anal. Chem, 64, pp.1187~1199 (1992)
- J. Ai, , Anal. Chem, 69(16), pp.3260~3266 (1997)
- E. Rianawati, , Phys. Chem. Earth, (Parts A, C), pp.2009, 34(13)[DOI]
- J. M. Neff, "Polycyclic aromatic hydrocarbons in the aquatic environment: sources, fates, and biological effects" (1979), Applied Science Publishers
- Polycyclic aromatic hydrocarbons in the aquatic environment: formation, sources, fate and effects on aquatic biota, "NRCC", National Research Council, 1~209, pp.National Research Council, Canada, 18981 (1987)
- CCREM, "Canadian Water Quality Guidelines", The Canadian Council of Resource and Environment Ministers, ~ (1987)