상악 전부 무치악 환자에서 CAD/CAM 시스템으로 제작되는 Pd-Ag 합금을 이용한 고정성 임플란트 전악 수복 증례
Maxillary cement retained implant supported fixed prosthesis using the millingable Pd-Ag alloy generated by CAD/CAM system: clinical report after two years in service
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
골흡수가 심한 환자에서 임플란트를 이용한 전악 수복의 경우 치은과 치아의 외형을 심미적이면서도 기능적으로 회복하기 위해서는 보철물 제작에 있어 신중을 기해야 한다. 이러한 전악 수복 증례에서 CAD/CAM 시스템이 높은 정확성을 가지는 보철물 제작을 가능하게 함으로써 사용이 증가하고 있다. 최근에 임상에서 티타늄이나 지르코니아의 단점을 완하면서 높은 생체적합성을 가지고 CAD/CAM 시스템으로 제작할 수 있는 팔라듐-은(Pd-Ag) 합금이 개발되어 사용되고 있다. 본 증례에서는 상악 전부 무치악 환자에서 임플란트를 식립하고 도재의 chipping이나 파절의 위험을 감소시키기 위해 Pd-Ag 합금을 이용해 제작된 임플란트 고정성 보철물로 수복한 환자에 대해 보고하고자 한다.
Abstract
Full-mouth reconstruction of a patient using dental implants is a challenge if there is vertical and horizontal bone resorption. Therefore, it is should be cautious in making the fixed prostheses that restore the function and the esthetics of the gingiva and teeth. In full mouth rehabilitation, CAD/CAM system makes it possible to fabricate restorations with high precision, regardless of span of the restoration. Recently, Palladium-silver (Pd-Ag) alloy which is highly biocompatible and millingable has been developed tocompensate for the shortcomings of the titanium or zirconia. This clinical report presents the reconstruction of a maxillary arch with a cement retained implant supported fixed prosthesis using a Pd-Ag alloy generated by CAD/CAM system on eleven osseointegrated implants. The occluding surfaces were made of Pd-Ag alloy, to decrease the risk of chipping or fracture. The prostheses were esthetically pleasing, and no clinical complications have been reported after two years.
참고문헌 (23)
- Purcell BA, "Prosthetic complications in mandibular metalresin implant-fixed complete dental prostheses: a 5-to 9-year analysis", Int J Oral Maxillofac Implants, 23, pp.847~857 (2008)
- Duncan JP, "Prosthodontic complications in a prospective clinical trial of single-stage implants at 36 months", Int J Oral Maxillofac Implants, 18, pp.561~565 (2003)
- Bozini T, "A metaanalysis of prosthodontics complication rates of implant-supported fixed dental prostheses in edentulous patients after an observation period of at least 5 years", Int J Oral Maxillofac Implants, 26, pp.304~318 (2011)
- Ortorp A, "Early laser-welded titanium frameworks supported by implants in the edentulous mandible: a 15-year comparative follow-up study", Clin Implant Dent Relat Res, 11, pp.311~322 (2009)
- Larsson C, "A prospective study of implant-supported full-arch yttria-stabilized tetragonal zirconia polycrystal mandibular fixed dental prostheses: three-year results", Int J Prosthodont, 23, pp.364~369 (2010)
- Ortorp A, "Clinical experiences of CNCmilled titanium frameworks supported by implants in the edentulous jaw: 1-year prospective study", Clin Implant Dent Relat Res, 2, pp.2~9 (2000)
- Linkevicius T, "Veneer fracture in implantsupported metal-ceramic restorations. Part I: Overall success rate and impact of occlusal guidance", Stomatologija, 10, pp.133~139 (2008)
- Katsoulis J, "Precision of fit of implantsupported screw-retained 10-unit computeraided- designed and computer-aided-manufactured frameworks made from zirconium dioxide and titanium: an in vitro study", Clin Oral Implants Res, 25, pp.165~174 (2014)
- Gilbert JL, "Bond characteristics of porcelain fused to milled titanium", Dent Mater, 10, pp.134~140 (1994)
- Reich S, "Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD", CAM systems, 2005, pp.113, 174~179
- Bachhav VC, "Zirconia-based fixed partial dentures: a clinical review", Quintessence Int, 42, pp.173~182 (2011)
- Huget EF, "Status report on palladiumsilver- based crown and bridge alloys", J Am Dent Assoc, 89, pp.383~385 (1974)
- Goodacre CJ, "Palladium-silver alloys: a review of the literature", J Prosthet Dent, 62, pp.34~37 (1989)
- Kansu G, "Evaluation of the biocompatibility of various dental alloys: Part I-Toxic potentials", Eur J Prosthodont Restor Dent, 4, pp.129~136 (1996)
- Henry PJ, "An alternate method for the production of accurate casts and occlusal records in the osseointegrated implant rehabilitation", J Prosthet Dent, 58, pp.694~697 (1987)
- Jemt T, "Prosthesis misfit and marginal bone loss in edentulous implant patients", Int J Oral Maxillofac Implants, 11, pp.620~625 (1996)
- Tan KB, "Three-dimensional analysis of the casting accuracy of one piece, osseointegrated implant-retained prostheses", Int J Prosthodont, 6, pp.346~363 (1993)
- Roberts DH, "The failure of retainers in bridge prostheses. An analysis of 2,000 retainers", Br Dent J, 128, pp.117~124 (1970)
- Denry I, "State of the art of zirconia for dental applications", Dent Mater, 24, pp.299~307 (2008)
- Barghi N, "Comparison of fracture strength of porcelain-veneeredto- high noble and base metal alloys", J Prosthet Dent, 57, pp.23~26 (1987)
- Warpeha WS Jr, "Design and technique variables affecting fracture resistance of metalceramic restorations", J Prosthet Dent, 35, pp.291~298 (1976)
- Anusavice KJ, "Delayed crack development in porcelain due to incompatibility stress", J Dent Res, 67, pp.1086~1091 (1988)
- Rosenstiel SF, "Contemporary fixed prosthodontics", pp.743~750 (2006), Elsevier Inc