Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objectives: This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and Methods: Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between 5 - 55°C, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent), Optidisc (Kerr), and Praxis TDV (TDV Dental) (n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37°C. The color differences (ΔE) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05). Results: Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p < 0.05). Significant color changes were detected after 1 day storage in coffee solution (p < 0.05), except Quixfil/Optidisc which was color-stable after 7 days (p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05). Conclusions: Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.
Abstract
Objectives: This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and Methods: Disk-shaped specimens (8 mm in diameter and 4 mm in thickness) were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent), one micro-hybrid bulk-fill (Quixfil, Dentsply), and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr) resin-based composites, and aged by thermocycling (between 5 - 55°C, 3,000 cycles). Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent), Optidisc (Kerr), and Praxis TDV (TDV Dental) (n = 12 per subgroup). One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37°C. The color differences (ΔE) were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05). Results: Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p < 0.05). Significant color changes were detected after 1 day storage in coffee solution (p < 0.05), except Quixfil/Optidisc which was color-stable after 7 days (p > 0.05). Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05). Conclusions: Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.
참고문헌 (25)
- Ilie N, "Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance", Oper Dent, 38, pp.618~625 (2013)
- Alshali RZ, "Long-term sorption and solubility of bulk-fill and conventional resin-composites in water and artificial saliva", J Dent, 43, pp.1511~1518 (2015)
- Fronza BM, "Monomer conversion, microhardness, internal marginal adaptation, and shrinkage stress of bulk-fill resin composites", Dent Mater, 31, pp.1542~1551 (2015)
- Rosatto CM, "Mechanical properties, shrinkage stress, cuspal strain and fracture resistance of molars restored with bulk-fill composites and incremental filling technique", J Dent, 43, pp.1519~1528 (2015)
- 김은하, "Effect of resin thickness on the microhardness and optical properties of bulk-fill resin composites", Restorative Dentistry and Endodontics, 40(2), pp.128~135 (2015), 대한치과보존학회
- Ilie N, "Investigations towards nanohybrid resin-based composites", Clin Oral Investig, 17, pp.185~193 (2013)
- Marigo L, "Relation between conversion degree and cytotoxicity of a flowable bulk-fill and three conventional flowable resin-composites", Eur Rev Med Pharmacol Sci, 19, pp.4469~4480 (2015)
- Jefferies SR, "Abrasive finishing and polishing in restorative dentistry: a state-of-the-art review", Dent Clin North Am, 51, pp.379~397 (2007)
- Dietschi D, "Comparison of the color stability of ten new-generation composites:an in vitro study", Dent Mater, 10, pp.353~362 (1994)
- Sirin Karaarslan E, "Effects of different polishing methods on color stability of resin composites after accelerated aging", Dent Mater J, 32, pp.58~67 (2013)
- Barakah HM, "Effect of polishing systems on stain susceptibility and surface roughness of nanocomposite resin material", J Prosthet Dent, 112, pp.625~631 (2014)
- Ozgünaltay G, "Effect of finishing and polishing procedures on the surface roughness of new tooth-colored restoratives", J Oral Rehabil, 30, pp.218~224 (2003)
- Gönülol N, "The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites", J Dent, 40(Supplement 2), pp.e64~e70 (2012)
- Borges AB, "Surface roughness of packable composite resins polished with various systems", J Esthet Restor Dent, 16, pp.42~47 (2004)
- Lu H, "Effect of surface roughness on stain resistance of dental resin composites", J Esthet Restor Dent, 17, pp.102~108 (2005)
- Da Costa J, "The effect of different polishing systems on surface roughness and gloss of various resin composites", J Esthet Restor Dent, 19, pp.214~226 (2007)
- Yazici AR, "Effects of delayed finishing", polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials, 2010, pp.4, 50~56
- Jung M, "Surface texture of four nanofilled and one hybrid composite after finishing", Oper Dent, 32, pp.45~52 (2007)
- Hergott AM, "An evaluation of different composite resin systems finished with various abrasives", J Am Dent Assoc, 119, pp.729~732 (1989)
- Ergücü Z, "Color stability of nanocomposites polished with one-step systems", Oper Dent, 33, pp.413~420 (2008)
- Ibarra ET, "Physical properties of a new sonically placed composite resin restorative material", Gen Dent, 63, pp.51~56 (2015)
- Iazzetti G, "Color stability of fluoride-containing restorative materials", Oper Dent, 25, pp.520~525 (2000)
- Rémond G, "Implications of polishing techniques in quantitative Xray microanalysis", J Res Natl Inst Stand Technol, 107, pp.639~662 (2002)
- da Silva JM, "Effect of different finishing times on surface roughness and maintenance of polish in nanoparticle and microhybrid composite resins", Eur J Esthet Dent, 5, pp.288~298 (2010)
- Sepúlveda-Navarro WF, "Color stability of resins and nylon as denture base material in beverages", J Prosthodont, 20, pp.632~638 (2011)