지르코니아 고정성 국소의치의 지대치간 거리에 따른 파절저항성에 관한 연구
Study of the fracture resistance of zirconia on posterior fixed partial dentures based on inter-abutment distance
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
목적: 하악 제2소구치와 제2대구치를 지대치로 한 지르코니아 고정성 국소의치에서 지대치 간 거리가 파절저항성에 미치는 영향을 조사하였다. 연구 재료 및 방법: Cameleon S zirconia block과 Luxen S2 zirconia block으로 각 재료별 지대치 간 거리를 달리 하여 CS군과 S2군으로 나누어 표기하였으며, 소결된 지르코니아 고정성 국소의치를 임시접착시멘트를 이용하여 에폭시 레진 다이에 합착하였다. 이후, 가공치 교합면에 직경 6 mm 강철구를 위치시켜 로드셀 5.0 kN의 universal testing machine에서크로스 헤드 속도 1.0 mm/min로 압력을 가하여 파절저항성을 측정하였다. 결과: 지르코니아 고정성 국소의치의 파절저항성은 지대치 간 거리에 큰 영향을 받지 않았다. CS군에서 지대치 간 거리가 15 mm인 경우가 13 mm와 17 mm인 경우보다 파절저항성이 유의하게 높았다(P < 0.05). S2군에서는 파절저항성이세 군 간에 유의한 차이가 없었다(P > 0.05). 결론: 하악 제2소구치와 제2대구치를 지대치로 한 지르코니아 고정성 국소의치에서 지대치 간 거리는 지르코니아의 종류에 따라 파절저항성에 영향을 줄 수 있다.
Abstract
Purpose: Zirconia fixed partial dentures with mandibular 2nd premolar and 2nd molar as abutments are fabricated and then the effects of inter-abutment distance on fracture resistance of zirconia fixed partial dentures is studied. Materials and Methods: The materials used in this study are Cameleon S zirconia block and S2 zirconia block, which are divided into CS Group and S2 Group applying different inter-abutment distance for each material, and the sintered zirconia fixed partial denture was luted to the epoxy resin die using a temporary luting cement, and then the fracture resistance was measured by placing a 6 mm diameter hardened steel ball on the occlusal surfaces of the pontics and applying pressure at a cross head speed of 1.0 mm/min on a universal testing machine with a load cell of 5.0 kN. Results: The fracture resistance of zirconia fixed partial dentures is not significantly affected by inter-abutment distance The fracture resistance of zirconia fixed partial dentures in CS Group was significantly higher in 15 mm of inter-abutment distance than in 13 mm and 17 mm of inter-abutment distance (P < 0.05). The fracture resistance of zirconia fixed partial dentures in S2 Group was not significantly different between the three groups (P > 0.05). Conclusion: The fracture resistance of zirconia fixed partial dentures with mandibular 2nd premolar and 2nd molar as abutments does not significantly affected by the inter-abutment distance.
참고문헌 (34)
- Lee HH, "Recent Dental Ceramics : Processing and Strengthening", J Korean Res Soc Dent Mater, 27, pp.1~11 (2000)
- Ardlin BI, "Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure", Dent Mater, 18, pp.590~595 (2002)
- Sobrinho LC, "Investigation of the dry and wet fatigue properties of three all-ceramic crown systems", Int J Prosthodont, 11, pp.255~262 (1998)
- Campbell SD, "Evaluation of the fit and strength of an all-ceramic fixed partial denture", J Prosthet Dent, 59, pp.301~306 (1988)
- Tinschert J, "Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study", Int J Prosthodont, 14, pp.231~238 (2001)
- Kohorst P, "Load-bearing capacity of all-ceramic posterior four-unit fixed partial dentures with different zirconia frameworks", Eur J Oral Sci, 115, pp.161~166 (2007)
- Meyenberg KH, "Zirconia posts : a new all-ceramic concept for nonvital abutment teeth", J Esthet Dent, 7, pp.73~80 (1995)
- Wagner WC, "Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics", J Prosthet Dent, 76, pp.140~144 (1996)
- Keith O, "Zirconia brackets : an evaluation of morphology and coefficients of friction", Am J Orthod Dentofacial Orthop, 106, pp.605~614 (1994)
- Tinschert J, "Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD", CAM system, 2001, pp.26, 367~374
- Oh W, "Influence of con-nector design on fracture probability of ceramic fixed-partial dentures", J Dent Res, 81, pp.623~627 (2002)
- El-Ebrashi MK, "Experimental stress analysis of dental restorations. VII. structural design and stress analysis of fixed partial dentures", J Prosthet Dent, 23, pp.177~186 (1970)
- Fischer H, "Lifetime prediction of all-ceramic bridges by computational methods", J Dent Res, 82, pp.238~242 (2003)
- Mahmood DJ, "Fracture strength of all-ceramic(YTZP)three-and four-unit fixed dental prostheses with different connector design and production history", Swed Dent J, 37, pp.179~187 (2013)
- Schmitter M, "Clinical performance of longspan zirconia frameworks for fixed dental prostheses : 5-year results", J Oral Rehabil, 39, pp.552~557 (2012)
- Sailer I, "Prospective clinical study of zirconia posterior fixed partial dentures : 3-year follow-up", Quintessence Int, 37, pp.685~693 (2006)
- Guazzato M, "Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics", Dent Mater, 20, pp.449~456 (2004)
- Luthardt RG, "Accuracy of mechanical digitizing with a CAD", CAM system for fixed restorations, 2001, pp.14, 146~151
- Dahlmo KI, "On a new method to assess the accuracy of a CAD program", Int J Prosthodont, 14, pp.276~283 (2001)
- Moldovan O, "Three-dimensional fit of CAD", CAM-made zirconia copings, 2011, pp.27, 1273~1278
- Beuer F, "Precision of fit : zirconia three-unit fixed dental prostheses", Clin Oral Investig, 13, pp.343~349 (2009)
- Al-Amleh B, "Clinical trials in zirconia : a systematic review", J Oral Rehabil, 37, pp.641~652 (2010)
- Manicone PF, "An overview of zirconia ceramics : basic properties and clinical applications", J Dent, 35, pp.819~826 (2007)
- Tinschert J, "Clinical behavior of zirconiabased fixed partial dentures made of DC-Zirkon : 3-year results", Int J Prosthodont, 21, pp.217~222 (2008)
- Lohbauer U, "Fractographic analysis of a dental zirconia framework : a case study on design issues", J Mech Behav Biomed Mater, 3, pp.623~629 (2010)
- Yusuke Takuma, "Effect of Framework Design on Fracture Resistance in Zirconia 4-unit All-ceramic Fixed Partial Dentures", Bull Tokyo Dent Coll, 54, pp.149~156 (2013)
- 서준용, "CAD", CAM을 이용한 구치부 전부도재 고정성 국소의치 지르코니아 코어의 연결부 설계에 따른 파절강도, 2006, pp.44(1), 29~39[DOI]
- Ogino Y, "Effect of connector design on fracture resistance in zirconia-based fixed partial dentures for upper anterior region", Bull Tokyo Dent Coll, 57, pp.65~74 (2016)
- Hamza TA, "Flexural strength of small connector designs of zirconia-based partial fixed dental prostheses", J Prosthetic Dent, 115, pp.224~229 (2016)
- 복성범, "지르코니아 구치부 고정성 국소의치의 파절저항성과 신뢰성에 관한 연구", 박사, 구강보건학, pp.2009
- Seo HW, "The effect of aging process on the flexural strength of airborne particle abraded zirconia ceramics", Master, pp.2015
- Jang KJ, "Effect of infiltration with ferric oxide contaning glass on the color, microstructure and strength of zirconia", Master, pp.2015
- 김민창, "지르코니아의 소결조건이 굴곡강도 및 입자크기에 미치는 영향", 석사, 고급치과보철학과, pp.2014
- Park JW, "A Comparative Study on the fracture strength of the multi coloured monolithic zirconia restoration", pp.2016