밀링과 소결과정이 지르코니아 보철물의 완성도에 미치는 영향에 관한 문헌고찰

키워드

참고문헌 (36)

1. Zhang Y, "Novel zirconia materials in dentistry", J Dent Res, 97, pp.140~147 (2018)
2. Lebon N, "Influence of milling tool and prosthetic materials on roughness of the dental CAD CAM prostheses in end milling mode", Appl Sci, 10, pp.2238~ (2020)
3. Ahmed WM, "The influence of altering sintering protocols on the optical and mechanical properties of zirconia : A review", J Esthet Restor Dent, 31, pp.423~430 (2019)
4. CAM in digital dentistry, "CAD", pp.2017, Schweiger J
5. Bosch G, "A 3-dimensional accuracy analysis of chairside CAD", CAM milling processes, 2014, pp.112, 1425~1431
6. Sadilek M, "Increasing the accuracy of free-form surface multiaxis milling", Materials (Basel), 14, pp.25~ (2020)
7. Lebon N, "A computer-aided tool to predict dental crown prosthesis surface integrity after milling", Comput Aided Des Appl, 16, pp.894~903 (2019)
8. Benoit A, "Impact of machining process on the flexural strength of CAD", CAM blocks for dental restorations, 2020, pp.23, S31~S32
9. Lebon N, "Influence of CAD", CAM tool and material on tool wear and roughness of dental prostheses after milling, 2015, pp.114, 236~247
10. Burgess JO, "Zirconia : The material, its evolution, and composition", Compend Contin Educ Dent, 39, pp.4~8 (2018)
11. Saridag S, "Basic properties and types of zirconia : An overview", World J Stomatol, 2, pp.40~47 (2013)
12. Michailova M, "Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering", J Mech Behav Biomed Mater, 111, pp.103977~ (2020)
13. Rosentritt M, "Multilayer zirconia : Influence of positioning within blank and sintering conditions on the in vitro performance of 3-unit fixed partial dentures", J Prosthet Dent, 127, pp.141~145 (2022)
14. Suzuki S, "Marginal and internal fit of three-unit zirconia fixed dental prostheses : Effects of prosthesis design, cement space, and zirconia type", J Prosthodont Res, 64, pp.460~467 (2020)
15. Ueda K, "Marginal and internal fit of three-unit fixed dental prostheses fabricated from translucent multicolored zirconia : Framework versus complete contour design", J Prosthet Dent, 125, pp.340.e1~340.e6 (2021)[DOI]
16. Oghbaei M, "Microwave versus conventional sintering : A review of fundamentals, advantages and applications", J Alloys Compounds, 494, pp.175~189 (2010)
17. Luz JN, "Novel speed sintered zirconia by microwave technology", Dent Mater, 37, pp.875~881 (2021)
18. Lawson NC, "Strength and translucency of zirconia after high-speed sintering", J Esthet Restor Dent, 32, pp.219~225 (2020)
19. Stawarczyk B, "The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio", Clin Oral Investig, 17, pp.269~274 (2013)
20. Grambow J, "Impact of changes in sintering temperatures on characteristics of 4YSZ and 5YSZ", J Mech Behav Biomed Mater, 120, pp.104586~ (2021)
21. Too TDC, "Influence of sintering conditions on translucency, biaxial flexural strength, microstructure, and low-temperature degradation of highly translucent dental zirconia", Dent Mater J, 40, pp.1320~1328 (2021)
22. Kilinc H, "Effect of sintering and aging processes on the mechanical and optical properties of translucent zirconia", J Prosthet Dent, 126, pp.129.e1~129.e7 (2021)
23. Ebeid K, "Effect of changes in sintering parameters on monolithic translucent zirconia", Dent Mater, 30, pp.e419~e424 (2014)[DOI]
24. Durkan R, "Effects of sintering time on translucency and color of translucent zirconia ceramics", J Esthet Restor Dent, 33, pp.654~659 (2021)
25. Sato T, "Thermal shock resistance of ZrO2 based ceramics", Mater Des, 9, pp.204~212 (1988)
26. Kaizer MR, "Speed sintering translucent zirconia for chairside one-visit dental restorations : Optical, mechanical, and wear characteristics", Ceram Int, 43, pp.10999~11005 (2017)
27. Yang CC, "Mechanical and optical properties evaluation of rapid sintered dental zirconia", Ceram Int, 46, pp.26668~26674 (2020)
28. Asaad R, "Influence of different sintering protocols on translucency and fracture resistance of monolithic zirconia crowns", Egypt Dent J, 66, pp.2649~2660 (2020)
29. 김근배, "마이크로 웨이브 소결 과정이 CAD", CAM 지르코니아 코아의 적합도에 미치는 영향, 2009, pp.25(2), 95~107[DOI]
30. Monaco C, "Microstructural study of microwave sintered zirconia for dental applications", Ceram Int, 41, pp.1255~1261 (2015)
31. Ramesh S, "Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia", Ceram Int, 44, pp.8922~8927 (2018)
32. Cokic SM, "Mechanical properties, aging stability and translucency of speed-sintered zirconia for chairside restorations", Dent Mater, 36, pp.959~972 (2020)
33. Liu H, "Influence of high-speed sintering protocols on translucency, mechanical properties, microstructure, crystallography, and low-temperature degradation of highly translucent zirconia", Dent Mater, 38, pp.451~468 (2022)
34. Ahmed WM, "Marginal discrepancies of monolithic zirconia crowns : The influence of preparation designs and sintering techniques", J Prosthodont, 28, pp.288~298 (2019)
35. Nakamura T, "In vitro investigation of fracture load and aging resistance of high-speed sintered monolithic tooth-borne zirconia crowns", J Prosthodont Res, 64, pp.182~187 (2020)
36. Elisa Kauling A, "Influence of speed sintering on the fit and fracture strength of 3-unit monolithic zirconia fixed partial dentures", J Prosthet Dent, 124, pp.380~386 (2020)

관련 논문AI추천