안면비대칭 진단을 위한 하악골 3차원영상 계측기준치에 관한 연구
A study on the 3-D standard value of mandible for the diagnosis of facial asymmetry
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
기존의 2차원적 진단자료는 상의 확대 및 왜곡으로 인해 형태나 크기의 정량적 평가시 부적절한 결과를 야기할 수 있어 안면비대칭의 정확한 진단과 치료계획 수립을 위해서는 3차원영상 진단의 도입이 필요하다. 본 연구는 안면비대칭 진단시 3차원적 분석에 도움이 되는 기준자료를 얻고자 정상교합자를 대상으로 하악골 3차원영상 계측항목의 평균값과 좌우차이의 정상범주를 알아보기 위하여 시행되었다. 뚜렷한 안면비대칭을 보이지 않는 성인 정상교합자 남녀 30명씩 총 60명을 대상으로 두경부 전산화단층사진을 촬영한 후 컴퓨터 프로그램을 이용한 각각의 단면 촬영영상 정보를 이용하여 3차원 입체영상을 재구성한 다음, 하악골 비대칭시 좌우차이를 보일 수 있는 계측항목으로 ramus length를 나타내는 6개, condylar neck length를 나타내는 1개, mandibular body length를 나타내는 8개 등 15개의 거리계측항목과, gonial angle을 나타내는 4개, frontal ramal inclination을 나타내는 2개, lateral ramal inclination을 나타내는 2개 등 8개의 각도계측항목, 총 23개의 계측항목을 설정한 후, 좌측과 우측을 구분하여 컴퓨터 상에서 3차원계측치를 구하고 좌우차이값을 산출하였다. 본 연구결과 얻어진 정상교합자의 하악골 3차원영상 계측항목의 좌우차이값은 안면비대칭 환자의 진단 기준치로 유용하게 사용될 수 있을 것이다.
Abstract
For an accurate diagnosis and treatment planning of facial asymmetry, the use of 3-dimensional (3-D) image is indispensable. The purpose of this study was to get standard data for the 3-D analysis of facial asymmetry. Computerized tomography (CT) was taken in the 60 normal occlusion individuals (30 male, 30 female) who did not have any apparent facial asymmetry. The acquired 2D CT DICOM data were input on a computer, and the reformatted 3-D images were created using a 3-D image software. Twenty three measurements were established in order to evaluate asymmetry; 15 linear measurements (6 for ramus length, 1 for condylar neck length, and 8 for mandibular body length) and 8 angular measurements (4 for gonial angle, 2 for frontal ramal inclination, and 2 for lateral ramal inclination). The right and left difference of each measurement was calculated and analyzed. It is suggested that the right and left differences of the measurements obtained from the study could be used as references for the diagnosis of facial asymmetric patients.
참고문헌 (53)
- "Facial asymmetry in healthy North American Caucasians", 51, pp.70~7 (1981)
- "Eccentricity of the skull", 52, pp.144~58 (1982)
- "Lateral facial asymmetry - Methods of assessment", 38, pp.82~92 (1968)
- "Facial keys to orthodontic diagnosis and treatment planning", 103, pp.299~312 (1993)
- "Changes in facial dimensions assessed from lateral and frontal photographs", 108, pp.389~93 (1995)
- "Changes in facial dimensions assessed from lateral and frontal photographs", 108, pp.489~99 (1995)
- "얼굴 비대칭 인지도와 정면 머리방사선 사진 계측항목간의 관련성 연구", 11, pp.41~8 (1998)
- "Asymmetries of the dentofacial complex", 24, pp.179~92 (1954)
- "A posteroanterior cephalometric evaluation of craniofacial asymmetry", 37, pp.205~11 (1967)
- "A radiographic study of facial asymmetry", 2, pp.37~40 (1975)
- "Asymmetry of the human facial skeleton", 45, pp.125~9 (1975)
- "A frontal asymmetry analysis", 21, pp.448~65 (1987)
- "Skeletal asymmetry in esthetically pleasing faces", 61, pp.43~8 (1991)
- "Data and patterns of transverse dentofacial structure of 6- to 15-year-old children:A posteroanterior cephalometric study", 101, pp.465~71 (1992)
- "Dental and facial asymmetries:a review", 64, pp.89~98 (1994)
- "Analysis of craniofacial asymmetry by multiplane cephalometry", 84, pp.217~24 (1983)
- "Three-dimensional x-ray stereometry from paired coplanar images:a progress report", 84, pp.292~312 (1983)
- "The geometry of three-dimensional measurement from paired coplanar x-ray images", 84, pp.313~22 (1983)
- "Three- dimensional visualization of the face and skull using computerized tomography and laser scanning techniques", 9, pp.247~53 (1987)
- "The three -dimensional cephalogram:theory,technique,and clinical application", 94, pp.327~37 (1988)
- "Landmarks in three dimension:reconstruction from cephalograms versus direct observation", 100, pp.133~40 (1991)
- "Distance from symmetry:a three-dimensional evaluation of facial asymmetry", 52, pp.1126~32 (1994)
- "Three- dimensional facial morphometry and conventional cephalometrics:a correlation study", 11, pp.329~38 (1996)
- "Assessment of 3- dimensional computer-generated cephalometric measurements", 116, pp.390~9 (1999)
- "Value of three-dimensional computed tomography in craniomaxillofacial surgery", 5, pp.282~8 (1994)
- "Indications and limitations of three- dimensional models in cranio-maxillofacial surgery", 26, pp.11~6 (1998)
- "A concept of facial esthetics", 40, pp.284~318 (1970)
- "안면비대칭 진단을 위한 새로운 정모 두부 방사선 규격사진 분석시스템 개발", 42, pp.219~31 (2004), 대치협회지
- "정모 두부 방사선 사진 촬영시 Head Posture Aligner의 유용성에 관한 연구", 30, pp.543~52 (2000)
- "정모 두부방사선규격사진 분석 시 기준선 설정 방법에 관한 비교 연구", 39, pp.676~83 (2001), 대치협회지
- "전산화단층사진을 이용한 하악골 3차원 영상에서 비대칭진단 계측항목의 재현도에 관한 연구" (2003), 전남대학교 대학원
- "안면비대칭에 대한 주관적 인지도와 정모두부방사선사진 분석치의 연관성", 31, pp.489~98 (2001)
- "An assessment of asymmetry in the normal craniofacial complex", 48, pp.141~8 (1978)
- "Enlargement and distortion in cephalometric radiography compensation tables for linear measurements", pp.230~44 (1980)
- "Measurability of radiographic images", 84, pp.212~6 (1983)
- "A study of the factors causing differences in the relative variability of linear radiographic cephalometric measurements", 92, pp.17~23 (1987)
- "두부방사선규격사진과 광학사진의 중첩적합도에 관한 측면 합성영상과 정면 합성영상의 비교" (2003), 연세대학교 대학원
- "Three dimensional CT reconstruction images for craniofacial surgical planning and evaluation", 150, pp.179~84 (1984)
- "Three-dimensional computed tomography imaging in the evaluation of craniofacial abnormalities", 86, pp.676~80 (1994)
- "Three-dimensional imaging of craniomaxillofacial structures with a standard personal computer", 24, pp.260~3 (1995)
- "Craniofacial imaging in orthodontics:historical perspective,current status,and future developments", 69, pp.491~506 (1999)
- "A comparison of conventional and spiral CT:an experimental study on the detection of spherical lesions", 18, pp.167~76 (1994)
- "Helical CT scanning for CAD", CAM subperiosteal implant construction, 1996, pp.22, 247~57
- "Three-dimensional dental imaging by spiral CT:A progress report", 84, pp.561~70 (1997)
- "A study of volumetric visualization and quantitative evaluation of bone trabeculae in helical CT", 32, pp.181~5 (2003)
- "CT diagnosis of ectopically erupting maxillary canines - a case report", 10, pp.115~21 (1988)
- "X-ray diagnosis of impacted upper canines in panoramic radiographs and computed tomographs", 60, pp.177~84 (1999)
- "Integration of three-dimensional cephalometry and 3D-skull models in combined orthodontic", surgical treatment planning, 1996, pp.57, 32~45
- "군집분석법에 의한 안면비대칭의 분류", 39, pp.765~73 (2001), 대치협회지
- "Diagnosis and treatment planning for correction of asymmetric dentofacial deformities" (1999), Mosby
- "A longitudinal cephalometric study of transverse and vertical craniofacial growth", 104, pp.471~83 (1993)
- "Craniofacial morphometry by photographic evaluations", 103, pp.327~37 (1993)
- "Craniofacial morphometry by photographic evaluations", 103, pp.327~37 (1993)
