본문 바로가기
KERD
논문KCI 등재

하악 이부확장 시 하악골 이동 양상과 응력 분포에 관한 삼차원 유한요소법적 연구

A 3-D finite element analysis on the mandibular movement pattern and stress distribution during symphyseal widening

김상철|조진형|채종문|홍현실|이도훈
대한치과교정학회 (The Korean Association Of Orthodontists)|2008.02|대한치과교정학회지 (The Korean Journal of Orthodontics)|제38권 제1호|pp. 13-30

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

삼차원 유한요소법Osteotomy3-D finite element analysis하악 이부확장골 절단견인장치Symphyseal wideningDistraction device
주제분류치의학

초록

하악 이부확장에서 골 절단선의 위치 및 종류와 견인 장치의 종류에 따른 차이를 알아보고자 삼차원 유한요소법으로 하악골의 이동 양상 및 응력 분포를 조사하였다. 골 견인장치의 종류로는 치아 의존형과 골 의존형, 혼합형, 30˚ 기울여 위치한 치아 의존형의 4가지를, 골절단 위치와 방법으로 하악 중절치 간 수직절단과 하악 정중이부를 관통하는 계단식 골절단 등의 2가지를 설정하였다. 연구 결과, 골절단의 위치 및 방법과 견인장치의 종류에 관계없이 과두를 포함한 하악골의 모든 부위에서 외측방 변위를 보였으며 상하적이나 전후방적 변위는 적은 양이었으나 방향에 있어 군간에 차이를 보였다. 치아 의존형 장치에 의한 골절단면 이개 양태는 V형이었으나 골 의존형 장치는 역V형이고 혼합형 장치는 평행하게 확장되었다. 골 의존형 장치에 의한 하악각의 외측 변위량이 다른 장치에 비해 컸다. 30˚ 기울여 위치한 치아 의존형에서의 변위는 측방적, 전후방적 면에서 좌우 차이가 인정되었다.

Abstract

Objective: The objective of this study was to evaluate the displacement pattern and the stress distribution of the finite element model 3-D visualization during symphyseal widening according to the osteotomy position, osteotomy type, and distraction device. Methods: The kinds of distraction devices used were tooth-borne type, hybrid type, bone-borne type and tooth-borne type 30° angulated, and the kinds of osteotomy design were vertical osteotomy line between the central incisors and step osteotomy line through the symphysis. Results: All reference points of the mandible including the condyles were displaced laterally irrespective of the osteotomy position, osteotomy method and distraction device. The anteroposterior or vertical displacements showed small differences between the groups. The widening pattern of the osteotomy line in the tooth-borne type of device was v shaped, and that of bone-borne type was a reverse v shape. However, the pattern in the hybrid type was parallel. The lateral displacement of the mandibular angle by the bone-borne device was more remarkable than the other types of devices. The displacement by the 30° angulated tooth-borne type was different between the left and right sides in both the transverse and anteroposterior aspects. Conclusion: The design of the distraction devices and osteotomy line can influence the displacement pattern and the stress distribution during mandibular symphyseal distraction osteogenesis procedures

참고문헌 (64)

  1. Kim YW, "A study on initial changes during canine retraction by the finite element method", Korean J Orthod, 18, pp.25~53 (1988)
  2. Creekmore TD, "The possibility of skeletal anchorage", J Clin Orthod, 17, pp.266~269 (1983)
  3. Proffit WR, "Surgical-orthodontic treatment" (1990), Mosby;
  4. Chin M, "Distraction osteogenesis in maxillofacial surgery using internal device: Review of five cases", J Oral Maxillofac Surg, 54, pp.45~53 (1996)
  5. Kim SC, "Corticotomy and the intrusive Tooth Movement", Korean J Orthod, 33, pp.399~405 (2003)
  6. Liou EJ, "Rapid canine retraction through distraction of periodontal ligament", Am J Orthod Dentofacial Orthop, 114, pp.~372 (1998)
  7. Tae KC, "Case reports of antero-posterior movement with distraction osteogenesis in maxillary anterior segment", Korean Assoc Maxillofac Plast Reconstr Surg, 25, pp.358~363 (2003)
  8. Gosain AK, "Distraction osteogenesis of the craniofacial skeleton", Plast Reconstr Surg, 107, pp.278~280 (2001)
  9. Lynch SE, "Tissue engineering", Guintessence (1999)
  10. McCarthy JG, "Distraction osteogenesis of the craniofacial skeleton", Plast Reconstr Surg, 107, pp.1812~1827 (2001)
  11. Altuna G, "Surgically assisted rapid orthodontic lengthening of the maxilla in primate? A pilot study", Am J Orthod Dentofacial Orthop, 107, pp.531~536 (1995)
  12. Figueroa AA, "Management of the sever cleft maxillary defiency with distraction osteogenesis: Procedure and result", Am J Orthod Dentofacial Orthop, 115, pp.1~20 (1999)
  13. Bell WH, "Surgical orthodontic expansion of the maxilla", Am J Orthod, 70, pp.517~528 (1976)
  14. Smith SW, "Evaluation of the consolidation period during osteodistraction using computed tomography", Am J Orthod Dentofacial Orthop, 116, pp.254~263 (1999)
  15. Del Santo M Jr, "Midsymphyseal distraction osteogenesis for correcting transverse mandibular discrepancies", Am J Orthod Dentofacial Orthop, 121, pp.629~638 (2002)
  16. Proffit WR, "Contemporary orthodentics" (2000), Mosby
  17. Park YC, "Biomechanics in clinical orthodontics" (1997), Narae Publishing
  18. Contasti G, "Mandibular widening by distraction osteogenesis", J Clin Orthod, 35, pp.165~173 (2001)
  19. Hollis BJ, "Chang A. An experimental study of mandibular arch widening in the dog using distraction osteogenesis", J Oral Maxillofac Surg, 56, pp.330~338 (1998)
  20. Weil TS, "Distraction osteogenesis for correction of transverse mandibular deficiency: A preliminary report", J Oral Maxillofac Surg, 55, pp.953~960 (1997)
  21. Guerrero CA, "Mandibular widening by intraoral distraction osteogenesis", Br J Oral Maxillofac Surg, 35, pp.383~392 (1997)
  22. Cope JB, "Mandibular distraction osteogenesis: A historic perspective and future direction", Am J Orthod Dentofacial Orthod, 115, pp.448~460 (1999)
  23. Von Sickels JE, "Distraction osteogenesis versus orthognathic surgery", Am J Orthod Dentofacial Orthod, 118, pp.482~484 (2000)
  24. Mommaerts MY, "Bone anchored intraoral device for transmandibular distraction", Br J Oral Maxillofac Surg, 39, pp.8~12 (2001)
  25. Del Santo M Jr, "Samchukov ML, Bell WH. Long-term skeletal and dental effects of mandibular symphyseal distraction osteogenesis", Am J Orthod Dentofacial Orthop, 118, pp.485~493 (2000)
  26. Conley R, "Mandibular Symphyseal Distraction Osteogenesis: Diagnosis and Treatment Planning Considerations", 73, pp.3~11 (2003)
  27. King JW, "A new appliance for mandibular widening by distraction osteogenesis", J Clin Orthod, 35, pp.666~672 (2001)
  28. Kim SC, "Surgically assisted rapid tooth movement", 2004
  29. Park CK, "A three-dimensional finite element analysis on the location of center of resistance during intrusion of upper anterior teeth", Korean J Orthod, 27, pp.259~272 (1997)
  30. Choi CK, "Finite element method" (2002), Techno-press
  31. Lee JY, "Finite element method" (2004), Munundang
  32. Korioth TW, "Deformation of the human mandible during simulated tooth clenching", Dent Res, 73, pp.56~66 (1994)
  33. Graber TM, "Orthodontics: Current principles and techniques" (1994), Mosb
  34. Kim HS, "A finite element and strain gauge analysis on the displacement of craniofacial complex with cervical headgear", Korean J Orthod, 17, pp.185~197 (1987)
  35. Wheeler RC, "A textbook of dental anatomy and physiology" (1965), Saunders
  36. Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
  38. Kim JS, "A statistical study of clinical crown inclination in Korean's naturally occuring optimal occlusion", Korean J Orthod, 22, pp.715~733 (1992)
  39. Choi BT, "A roentgenocephalometric study on mesiodistal axial inclination of posterior teeth", Korean J Orthod, 14, pp.151~160 (1984)
  40. Noyes HJ, "The angle of axial inclination of human central incisor teeth", Angle Orthod, 13, pp.60~61 (1943)
  41. Coolidge ED, "The thickness of the human periodontal membrane", J Am Dent Assoc. 1937;24:1260-70, 24, pp.1260~1270 (1937)
  42. Tanne K, "Moment to force ratios and the center of rotation", Am J Orthod Dentofacial Orthod, 94, pp.426~431 (1988)
  43. Joe BJ, "A finite element analysis of the stress distribution and displacement in human maxilla to rapid palatal expansion", Korean J Orthod, 15, pp.43~54 (1985)
  44. McGuinness N, "Stresses induced by edgewise appliances in the periodontal ligament - a finite element study", Angle Orthod, 62, pp.15~22 (1992)
  45. Kim MK, "Anatomy of head and neck" (1998), Medical dental publishing
  46. Kim JH, "Finite element analysis of mandibular stresses and denture movements induced by overdentures", J Korean Acad Prosthodont, 28, pp.63~94 (1990)
  47. Tahk SG, "A study on craniofacial growth analysis of Korean children by the finite element method", Korean J Orthod, 18, pp.343~366 (1988)
  48. Kim JY, "A finite element analysis on the effect of the reverse headgear to the maxillary complex", Korean J Orthod, 15, pp.7~22 (1985)
  49. Choue HK, "finite element analysis of the stress distribution and displacement of an in-vitro human mandible to the orthopedic force", Korean J Orthod, 14, pp.75~92 (1984)
  50. Jang JW, "A study on the pattern of movement during retraction of maxillary central incisor by finite element method", Korean J Orthod, 21, pp.617~634 (1991)
  51. Chun KM, "Mechanical analysis of the multiloop edgewise arch wire", Korean J Orthod, 21, pp.31~47 (1991)
  52. Hwang CI, "Three-dimensional finite element analysis on reciprocal action by torque application in maxillary archw", Korean J Orthod, 24, pp.479~508 (1994)
  53. Ilizarov GA, "The tension-stress effect on the genesis and growth of tissues Part I. The influence of stability of fixation and soft-tissue preservation", Clin Orthop Pleat Res, 238, pp.249~281 (1989)
  54. Snyder CC, "Mandibular lengthening by gradual distraction", Plast Reconstr Surg, 51, pp.506~508 (1973)
  55. Shapiro PA, "Mandibular dental arch form and dimension: treatment and postretension changes", Am J Orthod, 66, pp.58~70 (1974)
  56. Gardner SD, "Posttreatment and postretention changes following orthodontic therapy", Angle Orthod, 46, pp.151~161 (1976)
  57. Strang RHW, "The fallacy of denture expansion as a treatment procedure", Angle Orthod, 19, pp.12~22 (1949)
  58. Kisnisci RS, "Distraction osteogenesis in silver Russell syndrome to expand the mandible", Am J Orthod Dentofacial Orthod, 116, pp.25~30 (1999)
  59. Bell WH, "Guerrero CA. Intraoral widening and lengthening the mandible in baboons by distraction osteogenesis", J Oral Maxillofac Surg, 57, pp.548~562 (1999)
  60. Samchukov ML, "The effect of sagittal orientation of the distractor on biomechanics of mandibular lengthening", J Oral Maxillofac Surg, 57, pp.1214~1222 (1999)
  61. Cope JB, "Force level and strain patterns during bilateral mandibular osteodistraction", J Oral Maxillofac Surg, 58, pp.171~178 (2000)
  62. Samchukov ML, "Biomechanical considerations of mandibular lenthening and widening by gradual distraction using a computer medel", J Oral Maxillofac Surg, 56, pp.51~59 (1998)
  63. Harper RP, "Reactive changes in the temporomandibular joint after mandibular midline osteodistraction", Br J Oral Maxillofac Surg, 35, pp.20~25 (1997)
  64. Braun S, "Condylar displacement related to mandibular symphyseal distraction", Am J Orthod Dentofacial Orthop, 121, pp.162~166 (2002)

관련 논문AI추천

다양한 하악 이부 확장 패턴에 관한 연구강경화, 김경환, 태기출대한치과교정학회 · 대한치과교정학회지2005 · 제35권 제1호Three-dimensional finite element analysis of the stress distribution and displacement in different fixation methods of bilateral sagittal split ramus osteotomy박재억, 윤경인, Jong Min Lee, Myung-Kyun Park, Yoon-Hee Park, Young-Gyu Cho대한구강악안면외과학회 · 대한구강악안면외과학회지2012 · 제38권 제5호교정용 미니스크류를 이용한 하악 전치 함입 시 변위양상의 3차원 유한요소분석모성서, 박현경, 성의향, 이기준, 전윤식, 조영수대한치과교정학회 · 대한치과교정학회지2011 · 제41권 제6호하악지시상분할골절단술 시행 후 von-Miese 항복강도에 대한 유한요소법적 연구김여갑, 윤옥병대한구강악안면외과학회 · 대한구강악안면외과학회지2002 · 제28권 제3호A comparison of fixation methods using three-dimensional finite element analysis following anterior segmental osteotomy박명균, 박재억, 윤경인, Min-Kyu Park대한구강악안면외과학회 · 대한구강악안면외과학회지2012 · 제38권 제6호유한요소법을 이용한 응력 및 변형 분포의 분석 - 하악골의 이모장치효과 -고영한, 김재곤, 백병주, 양연미, 이민정, 이용훈대한소아치과학회 · 대한소아치과학회지2011 · 제38권 제2호

이 간행물의 다른 논문 (5건)

교정용 미니스크류의 디자인에 따른 식립 및 제거 토오크윤태민, 차정열, 황충주pp. 5-12Miniscrew implant를 이용한 상악 구치부 압하와 개방교합 치료의 효과 및 안정성이한아, 박영철pp. 31-40하악 후퇴술과 전진 이부성형술이 시행된Ⅲ급 부정교합자의 초진 시 측모 두부 방사선사진특성에 관한 연구김재식, 강승구, 김정일pp. 41-51제4경추의 형태와 초경을 통한 성숙지표에 관한 연구박양호, 황용인, 이규홍, 김윤지, 백승학, 차경석pp. 52-59Class III nonsurgical treatment using indirect skeletal anchorage: A case report최준영, 임원희, 전윤식pp. 60-67
원문 보기