분사처리 후 산부식 표면처리된 교정용 미니 임플랜트의 골유착능에 관한 연구
Effects of surface treatment on the osseointegration potential of orthodontic mini-implant
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는 교정 치료 시 골내 고정원으로 사용되는 교정용 임플랜트의 표면처리 여부가 골유착능에 있어서 어떠한 효과를 보이는지 제거회전력의 측정을 통해 알아보고자 하였으며, 그에 따른 교정력 적용의 확장과 임상적 의의를 알아보고자 하였다. 실험군은 분사처리 후 산부식(Sand-blasted Large grit, and Acid etched, SLA) 표면 처리된 교정용 미니 임플랜트인 C-implant (Cimplant, Seoul, Korea)를 사용하였으며 대조군은 같은 디자인이지만 표면 처리를 하지 않은 평활면 C-implant를 사용하였다. 실험군과 대조군을 각각 2개씩 11마리의 가토 경골에 식립하였고 식립 후 6주에 가토를 희생시켜 제거회전력을 측정하여 t-test를 통하여 두 군의 제거회전력 차이의 통계적 유의성을 알아보았으며 조직표본을 만들어 조직소견을 관찰하였다. 실험결과 제거회전력은 SLA 처리한 C-implant 군이 평활면 C-implant 군보다 통계적으로 유의성 있게 높은 결과를 보였다 (p ＜ 0.05). 평활면 C-implant 군의 평균 제거회전력 값은 4.614 Ncm이고, SLA C-implant 군의 평균 제거회전력 값은 6.286 Ncm로, SLA 군이 평활면 군보다 73% 더 높은 제거회전력에 대한 저항성을 나타내었다. 이상의 연구 결과에서 SLA 표면처리가 C-implant의 골유착능을 증가시켰음을 알 수 있었다. 따라서 표면 처리된 교정용 미니 임플랜트는 기존의 임플랜트에 비해 좀 더 강한 힘에 저항할 수 있으며 탈락률을 낮출 수 있을 것으로 생각된다. (대치교정지 2008;38(5):328-336)
Abstract
Objective: The purpose of this study was to compare the torque resistance to removal of sandblasted large grit and acid etched (SLA) surface treated orthodontic mini-implants and smooth surface orthodontic mini-implants as well as performing histologic observations. Methods: Two groups of custom screw shaped orthodontic mini-implants (C-implant, 1.8 mm outer diameter × 9.5 mm length, Cimplant, Seoul, Korea) were designated. 22 SLA treated C-implants (SLA group) and 22 machined surface C-implants (machined group) were placed in the tibia metaphysis of 11 adult New Zealand white rabbits. Following a 6-week healing period, the rabbits were sacrificed. Subsequently, the C-implants were removed under reverse torque rotation with a digital torque measuring device and independent t-test was performed. Selected tissues were prepared for histologic observation. Results: The SLA group presented a higher mean removal torque value (6.286 Ncm) than the machined group (4.491 Ncm) which was statistically significant (p ＜ 0.005). Histologic observation revealed a trend of more new bone formation in contact with the screw surface in the SLA group than the smooth group. Conclusions: The results of this study suggested that SLA surface treatment can enhance the osseintegration potential for C-orthodontic mini-implants. (Korean J Orthod 2008;38(5):328-336)
참고문헌 (27)
- Gainforth BL, "A study of orthodontic anchorage possibilities in basal bone", Am J Orthod Oral Surg, 31, pp.406~416 (1945)
- Creekmore TD, "The possibility of skeletal anchorage", J Clin Orthod, 17, pp.266~269 (1983)
- Kanomi R, "Mini-implant for orthodontic anchorage", J Clin Orthod, 31, pp.763~767 (1997)
- Costa A, "Miniscrew as orthodontic anchorage: a preliminary report", Int J Adult Orthodon Orthognath Surg, 13, pp.201~209 (1998)
- Melsen B, "A rational approach to orthodontic anchorage", Prog Orthod, 1, pp.10~22 (1999)
- Park HS, "A new protocol of the sliding mechanics with micro-implant anchorage (M.I.A)", Korean J Orthod, 30, pp.677~685 (2000)
- 박효상, "교정치료 고정원으로서 Microscrew implants의 성공율에 대한 임상적 연구", 대한치과교정학회지, 33(3), pp.151~156 (2003), 대한치과교정학회
- Klokkevold PR, "Nishimura RD, Adachi M, Caputo A. Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit", Clin Oral Implants Res, 8, pp.442~447 (1997)
- Buser D, , Int J Oral Maxillofac Implants, 13, pp.611~619 (1998)
- Cordioli G, "Removal torque and histomorphometric investigation of 4 different titanium surfaces: an experimental study in the rabbit tibia", Int J Oral Maxillofac Implants, 15, pp.668~674 (2000)
- Klokkevold PR, "Early endosseous integration enhanced by dual acid etching of titanium: a torque removal study in the rabbit", Clin Oral Implants Res, 12, pp.350~357 (2001)
- Lee SJ, "Chung KR The effect of early loading on the direct bone-to-implant surface contact of the orthodontic osseointegrated titanium implant", Korean J Orthod, 31, pp.173~185 (2001)
- Cho SA, "A removal torque of the laser-treated titanium implants in rabbit tibia", Biomaterials, 24, pp.4859~4863 (2003)
- Chung KR, "C-orthodontic micro-implant", J Clin Orthod, 38, pp.478~486 (2004)
- Chung K, "C-orthodontic microimplant for distalization of mandibular dentition in Class III correction", Angle Orthod, 75, pp.119~128 (2005)
- Albrektsson T, "Osseointegration titanium implants. Requirements for ensuring a long-lasting, direct bone-to-bone implant anchorage in man", Acta Orthop Scand, 52, pp.155~170 (1981)
- Johansson C, "Integration of screw implants in the rabbit: a 1-year follow-up of removal torque of titanium implants", Int J Oral Maxillofac Implants, 2, pp.69~75 (1987)
- Ivanoff CJ, "Influence of implant diameters on the integration of screw implant. An experimental study in rabbits", Int J Oral Maxillofac Surg, 26, pp.141~148 (1997)
- Lim JW, "Three dimensional finite element method for stress distribution on the length and diameter of orthodontic miniscrew and cortical bone thickness", Korean J Orthod, 33, pp.11~20 (2003)
- Cha JY, "Insertion and removal torques according to orthodontic mini-screw design", Korean J Orthod, 38, pp.5~12 (2008)
- Carlsson I, "Removal torques for polished and rough titanium implants", Int J Oral Maxillofac Implants, 3, pp.21~24 (1988)
- Darvell BW, "Tideman H. Contamination of titanium castings by aluminium oxide blasting", J Dent, 23, pp.319~322 (1995)
- Conchran DL, "Evaluation of an endosseous titanium implant with sandblasted and acid-etched surface in the canine mandible: radiographic results", Clin Oral Implants Res, 7, pp.240~252 (1996)
- Baker D, "Rate of pull-out strength gain of dual-etched titanium implants: a comparative study in rabbits", Int J Oral Maxillofac Implants, 14, pp.722~728 (1999)
- Oh NH, "Removal torque of sandblasted, large grit, acid etched treated mini-implant", Korean J Orthod, 36, pp.324~330 (2006)
- Buser D, "Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs", J Biomed Mater Res, 25, pp.889~902 (1991)
- Costa A, "L'Aarhus anchorage system", Ortognatodonzia Italiana, 9, pp.487~496 (2000)