Reliability of cone-beam computed tomography for temporomandibular joint analysis
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: The aim was to assess the intraobserver and interobserver reliabilities of temporomandibular joint linear measurements and condylar shape classifications performed with cone-beam computed tomography (CBCT). Methods: CBCT images of 30 patients were measured at two different time points by two orthodontists using the Dolphin 3D program (n = 60). Anterior, posterior, and superior joint space measurements and sagittal joint morphology classification in the sagittal view and medial and lateral joint space and mediolateral width measurements and coronal joint morphology classification in the coronal view were recorded. Intraclass-interclass correlation coefficients (ICC) and kappa statistics were used to assess intraobserver and interobserver reliability for the measurements and morphology classifications, respectively. Results: The ICC values were good for measurements of the posterior joint space by observer I and for measurements of the posterior, medial, and lateral joint spaces by observer II, while the other intraobserver measurements were excellent. Only the mediolateral width measurements showed excellent interobserver ICC values, while the other measurements showed good interobserver ICC values. Intraobserver agreement for the sagittal morphology classifications was moderate (k = 0.479) and almost perfect (k = 0.858) for observers I and II, respectively, while the corresponding agreement for the coronal morphology classifications was substantial for both observers. The interobserver agreement values for sagittal and coronal morphology classifications were slight (k = 0.181) and fair (k = 0.265), respectively. Conclusions: Linear temporomandibular joint measurements were reproducible and reliable in both intraobserver and interobserver evaluations. However, interobserver agreement for assessments of condylar shape was low.
Abstract
Objective: The aim was to assess the intraobserver and interobserver reliabilities of temporomandibular joint linear measurements and condylar shape classifications performed with cone-beam computed tomography (CBCT). Methods: CBCT images of 30 patients were measured at two different time points by two orthodontists using the Dolphin 3D program (n = 60). Anterior, posterior, and superior joint space measurements and sagittal joint morphology classification in the sagittal view and medial and lateral joint space and mediolateral width measurements and coronal joint morphology classification in the coronal view were recorded. Intraclass-interclass correlation coefficients (ICC) and kappa statistics were used to assess intraobserver and interobserver reliability for the measurements and morphology classifications, respectively. Results: The ICC values were good for measurements of the posterior joint space by observer I and for measurements of the posterior, medial, and lateral joint spaces by observer II, while the other intraobserver measurements were excellent. Only the mediolateral width measurements showed excellent interobserver ICC values, while the other measurements showed good interobserver ICC values. Intraobserver agreement for the sagittal morphology classifications was moderate (k = 0.479) and almost perfect (k = 0.858) for observers I and II, respectively, while the corresponding agreement for the coronal morphology classifications was substantial for both observers. The interobserver agreement values for sagittal and coronal morphology classifications were slight (k = 0.181) and fair (k = 0.265), respectively. Conclusions: Linear temporomandibular joint measurements were reproducible and reliable in both intraobserver and interobserver evaluations. However, interobserver agreement for assessments of condylar shape was low.
참고문헌 (30)
- Okeson JP, "Orthodontics:current principles and techniques", pp.353~366 (2017), Elsevier
- Kaur A, "Improved visualization and assessment of condylar position in the glenoid fossa for different occlusions : a CBCT study", J Contemp Dent Pract, 17, pp.679~686 (2016)
- In-Young Park, "Three-dimensional cone-beam computed tomography based comparison of condylar position and morphology according to the vertical skeletal pattern", 대한치과교정학회지, 45(2), pp.66~73 (2015), 대한치과교정학회
- Al-Saleh MA, "MRI and CBCT image registration of temporomandibular joint : a systematic review", J Otolaryngol Head Neck Surg, 45, pp.30~ (2016)
- Brooks SL, "Imaging of the temporomandibular joint : a position paper of the American Academy of Oral and Maxillofacial Radiology", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 83, pp.609~618 (1997)
- Barghan S, "Application of cone beam computed tomography for assessment of the temporomandibular joints", Aust Dent J, 57(Suppl 1), pp.109~118 (2012)
- Adibi S, "Cone beam computed tomography in dentistry : what dental educators and learners should know", J Dent Educ, 76, pp.1437~1442 (2012)
- Kiljunen T, "Dental cone beam CT : A review", Phys Med, 31, pp.844~860 (2015)
- Luciana Fonseca MERIGUE, "Tomographic evaluation of the temporomandibular joint in malocclusion subjects: condylar morphology and position", Brazilian Oral Research, 30(1) (2016), FapUNIFESP (SciELO)[DOI]
- Hande Gorucu Coskuner, "Three-dimensional assessment of the temporomandibular joint and mandibular dimensions after early correction of the maxillary arch form in patients with Class II division 1 or division 2 malocclusion", 대한치과교정학회지, 45(3), pp.121~129 (2015), 대한치과교정학회
- Paknahad M, "Correlation between condylar position and different sagittal skeletal facial types", J Orofac Orthop, 77, pp.350~356 (2016)
- . Position statement by the American Academy of Oral and Maxillofacial Radiology, "Oral Surg Oral Med Oral Pathol Oral Radiol", 2013, 238~257
- Dalili Z, "Assessing joint space and condylar position in the people with normal function of temporomandibular joint with cone-beam computed tomography", Dent Res J(Isfahan), 9, pp.607~612 (2012)
- Katsavrias EG, "Morphology of the temporomandibular joint in subjects with Class II Division 2 malocclusions", Am J Orthod Dentofacial Orthop, 129, pp.470~478 (2006)
- Martins E, "Coronal joint spaces of the temporomandibular joint : Systematic review and meta-analysis", J Clin Exp Dent, 7, pp.e435~40 (2015)
- Leonardi R, "Condyle fossa relationship associated with functional posterior crossbite, before and after rapid maxillary expansion", Angle Orthod, 82, pp.1040~1046 (2012)
- Kinzinger G, "Topography and morphology of the mandibular condyle during fixed functional orthopedic treatment--a magnetic resonance imaging study", J Orofac Orthop, 68, pp.124~147 (2007)
- Mattos CT, "Reliability of upper airway linear, area, and volumetric measurements in cone-beam computed tomography", Am J Orthod Dentofacial Orthop, 145, pp.188~197 (2014)
- Landis JR, "The measurement of observer agreement for categorical data", Biometrics, 33, pp.159~174 (1977)
- Paknahad M, "Cone-beam computed tomographic assessment of mandibular condylar position in patients with temporomandibular joint dysfunction and in healthy subjects", Int J Dent, 2015, pp.301796~ (2015)
- Mahrokh Imanimoghaddam, "Evaluation of condylar positions in patients with temporomandibular disorders: A cone-beam computed tomographic study", Imaging Science in Dentistry, 46(2), pp.127~131 (2016), 대한영상치의학회
- Honey OB, "Accuracy of cone-beam computed tomography imaging of the temporomandibular joint : comparisons with panoramic radiology and linear tomography", Am J Orthod Dentofacial Orthop, 132, pp.429~438 (2007)
- Ikeda R, "Novel 3-dimensional analysis to evaluate temporomandibular joint space and shape", Am J Orthod Dentofacial Orthop, 149, pp.416~428 (2016)
- Vitral RW, "Computed tomography evaluation of temporomandibular joint alterations in patients with Class II division 1 subdivision malocclusions : condyle-fossa relationship", Am J Orthod Dentofacial Orthop, 126, pp.48~52 (2004)
- Rodrigues AF, "Computed tomography evaluation of the temporomandibular joint in Class I malocclusion patients : condylar symmetry and condyle-fossa relationship", Am J Orthod Dentofacial Orthop, 136, pp.192~198 (2009)
- Rodrigues AF, "Computed tomography evaluation of the temporomandibular joint in Class II Division 1 and Class III malocclusion patients : condylar symmetry and condylefossa relationship", Am J Orthod Dentofacial Orthop, 136, pp.199~206 (2009)
- Ikeda K, "Assessment of optimal condylar position with limited cone-beam computed tomography", Am J Orthod Dentofacial Orthop, 135, pp.495~501 (2009)
- Cholasueksa P, "Alterations of the rat temporomandibular joint in functional posterior displacement of the mandible", Angle Orthod, 74, pp.677~683 (2004)
- Isacsson G, "Internal derangement of the temporomandibular joint : radiographic and histologic changes associated with severe pain", J Oral Maxillofac Surg, 44, pp.771~778 (1986)
- Pittayapat P, "Accuracy of linear measurements using three imaging modalities : two lateral cephalograms and one 3D model from CBCT data", Eur J Orthod, 37, pp.202~208 (2015)