Cone-beam computed tomographic evaluation of the temporomandibular joint and dental characteristics of patients with Class II subdivision malocclusion and asymmetry
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: Treating Class II subdivision malocclusion with asymmetry has been a challenge for orthodontists because of the complicated characteristics of asymmetry. This study aimed to explore the characteristics of dental and skeletal asymmetry in Class II subdivision malocclusion, and to assess the relationship between the condyle-glenoid fossa and first molar. Methods: Cone-beam computed tomographic images of 32 patients with Class II subdivision malocclusion were three-dimensionally reconstructed using the Mimics software. Forty-five anatomic landmarks on the reconstructed structures were selected and 27 linear and angular measurements were performed. Paired-samples t-tests were used to compare the average differences between the Class I and Class II sides; Pearson correlation coefficient (r) was used for analyzing the linear association. Results: The faciolingual crown angulation of the mandibular first molar (p < 0.05), sagittal position of the maxillary and mandibular first molars (p < 0.01), condylar head height (p < 0.01), condylar process height (p < 0.05), and angle of the posterior wall of the articular tubercle and coronal position of the glenoid fossa (p < 0.01) were significantly different between the two sides. The morphology and position of the condyle-glenoid fossa significantly correlated with the three-dimensional changes in the first molar. Conclusions: Asymmetry in the sagittal position of the maxillary and mandibular first molars between the two sides and significant lingual inclination of the mandibular first molar on the Class II side were the dental characteristics of Class II subdivision malocclusion. Condylar morphology and glenoid fossa position asymmetries were the major components of skeletal asymmetry and were well correlated with the three-dimensional position of the first molar. [Korean J Orthod 2017;47(5):277-288]
Abstract
Objective: Treating Class II subdivision malocclusion with asymmetry has been a challenge for orthodontists because of the complicated characteristics of asymmetry. This study aimed to explore the characteristics of dental and skeletal asymmetry in Class II subdivision malocclusion, and to assess the relationship between the condyle-glenoid fossa and first molar. Methods: Cone-beam computed tomographic images of 32 patients with Class II subdivision malocclusion were three-dimensionally reconstructed using the Mimics software. Forty-five anatomic landmarks on the reconstructed structures were selected and 27 linear and angular measurements were performed. Paired-samples t-tests were used to compare the average differences between the Class I and Class II sides; Pearson correlation coefficient (r) was used for analyzing the linear association. Results: The faciolingual crown angulation of the mandibular first molar (p < 0.05), sagittal position of the maxillary and mandibular first molars (p < 0.01), condylar head height (p < 0.01), condylar process height (p < 0.05), and angle of the posterior wall of the articular tubercle and coronal position of the glenoid fossa (p < 0.01) were significantly different between the two sides. The morphology and position of the condyle-glenoid fossa significantly correlated with the three-dimensional changes in the first molar. Conclusions: Asymmetry in the sagittal position of the maxillary and mandibular first molars between the two sides and significant lingual inclination of the mandibular first molar on the Class II side were the dental characteristics of Class II subdivision malocclusion. Condylar morphology and glenoid fossa position asymmetries were the major components of skeletal asymmetry and were well correlated with the three-dimensional position of the first molar. [Korean J Orthod 2017;47(5):277-288]
참고문헌 (29)
- Janson G, "Class II subdivision malocclusion types and evaluation of their asymmetries", Am J Orthod Dentofacial Orthop, 131, pp.57~66 (2007)
- Azevedo AR, "Evaluation of asymmetries between subjects with Class II subdivision and apparent facial asymmetry and those with normal occlusion", Am J Orthod Dentofacial Orthop, 129, pp.376~383 (2006)
- Janson GR, "Three-dimensional evaluation of skeletal and dental asymmetries in Class II subdivision malocclusions", Am J Orthod Dentofacial Orthop, 119, pp.406~418 (2001)
- Meloti AF, "Lateral cephalometric diagnosis of asymmetry in Angle Class II subdivision compared to Class I and II", Dental Press J Orthod, 19, pp.80~88 (2014)
- Sanders DA, "Skeletal and dental asymmetries in Class II subdivision malocclusions using cone-beam computed tomography", Am J Orthod Dentofacial Orthop, 138, pp.542.e1~542.e20 (2010)
- Minich CM, "Evaluation of skeletal and dental asymmetries in Angle Class II subdivision malocclusions with cone-beam computed tomography", Am J Orthod Dentofacial Orthop, 144, pp.57~66 (2013)
- Li J, "Dental, skeletal asymmetries and functional characteristics in Class II subdivision malocclusions", J Oral Rehabil, 42, pp.588~599 (2015)
- Kurusu A, "Relationship between occlusal force and mandibular condyle morphology. Evaluated by limited cone-beam computed tomography", Angle Orthod, 79, pp.1063~1069 (2009)
- Vitral RW, "Computed tomography evaluation of temporomandibular joint alterations in patients with class II division 1 subdivision malocclusions:condyle-fossa relationship", Am J Orthod Dentofacial Orthop, 126, pp.48~52 (2004)
- Rodrigues AF, "Computed tomography evaluation of the temporomandibular joint in Class II Division 1 and Class III malocclusion patients: condylar symmetry and condyle-fossa relationship", Am J Orthod Dentofacial Orthop, 136, pp.199~206 (2009)
- Fraga MR, "Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions", Med Sci Monit, 19, pp.903~907 (2013)
- Krisjane Z, "Threedimensional evaluation of TMJ parameters in Class II and Class III patients", Stomatologija, 11, pp.32~36 (2009)
- Saccucci M, "Condylar volume and condylar area in class I, class II and class III young adult subjects", Head Face Med, 8, pp.34~ (2012)
- Schulze D, "Radiation exposure during midfacial imaging using 4- and 16-slice computed tomography, cone beam computed tomography systems and conventional radiography", Dentomaxillofac Radiol, 33, pp.83~86 (2004)
- Cevidanes LH, "Image analysis and superimposition of 3-dimensional conebeam computed tomography models", Am J Orthod Dentofacial Orthop, 129, pp.611~618 (2006)
- Salemi F, "Diagnosis of simulated condylar bone defects using panoramic radiography, spiral tomography and cone-beam computed tomography: a comparison study", J Clin Exp Dent, 7, pp.e34~e39 (2015)
- Ludlow JB, "Accuracy of measurements of mandibular anatomy in cone beam computed tomography images", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 103, pp.534~542 (2007)
- Neiva MB, "Evaluation of cephalometric landmark identification on CBCT multiplanar and 3D reconstructions", Angle Orthod, 85, pp.11~17 (2015)
- Pinho T, "Treatment of a Class II subdivision based on occlusal plane control: a clinical case", Orthodontics (Chic.), 13, pp.128~137 (2012)
- Kurt G, "Mandibular asymmetry in Class II subdivision malocclusion", Angle Orthod, 78, pp.32~37 (2008)
- Mohlin BO, "Malocclusion and temporomandibular disorder: a comparison of adolescents with moderate to severe dysfunction with those without signs and symptoms of temporomandibular disorder and their further development to 30years of age", Angle Orthod, 74, pp.319~327 (2004)
- Egermark I, "A 20-year follow-up of signs and symptoms of temporomandibular disorders and malocclusions in subjects with and without orthodontic treatment in childhood", Angle Orthod, 73, pp.109~115 (2003)
- Paknahad M, "Association between mandibular condylar position and clinical dysfunction index", J Craniomaxillofac Surg, 43, pp.432~436 (2015)
- Talaat W, "CBCT analysis of bony changes associated with temporomandibular disorders", Cranio, 34, pp.88~94 (2016)
- Slavicek R, "Relationship between occlusion and temporomandibular disorders: implications for the gnathologist", Am J Orthod Dentofacial Orthop, 139, pp.10~ (2011)
- Tanne K, "Current status of temporomandibular joint disorders and the therapeutic system derived from a series of biomechanical, histological, and biochemical studies", APOS Trends Orthod, 5, pp.4~21 (2015)
- Burstone CJ, "Diagnosis and treatment planning of patients with asymmetries", Semin Orthod, 4, pp.153~164 (1998)
- Chung KR, "Molar distalization with a partially integrated mini-implant to correct unilateral Class II malocclusion", Am J Orthod Dentofacial Orthop, 138, pp.810~819 (2010)
- Bock NC, "Class II subdivision treatment with the Herbst appliance", Angle Orthod, 83, pp.327~333 (2013)