Predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion in young adults: A preliminary study
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults. Methods: The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)- mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification. Results: In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = –0.506, –0.494, and –0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = –0.900, p < 0.05). Conclusions: The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.
Abstract
Objective: We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults. Methods: The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)- mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification. Results: In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = –0.506, –0.494, and –0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = –0.900, p < 0.05). Conclusions: The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.
참고문헌 (30)
- Lee KJ, "Miniscrew-assisted nonsurgical palatal expansion before orthognathic surgery for a patient with severe mandibular prognathism", Am J Orthod Dentofacial Orthop, 137, pp.830~839 (2010)
- 박정진, "Skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion in young adults: A cone-beam computed tomography study", 대한치과교정학회지, 47(2), pp.77~86 (2017), 대한치과교정학회
- Jain V, "Comparison and evaluation of stresses generated by rapid maxillary expansion and the implant-supported rapid maxillary expansion on the craniofacial structures using finite element method of stress analysis", Prog Orthod, 18, pp.3~ (2017)
- Handelman CS, "Nonsurgical rapid maxillary expansion in adults : report on 47 cases using the Haas expander", Angle Orthod, 70, pp.129~144 (2000)
- Işeri H, "Semirapid maxillary expansion--a study of long-term transverse effects in older adolescents and adults", Angle Orthod, 74, pp.71~78 (2004)
- Cunha ACD, "Miniscrew-assisted rapid palatal expansion for managing arch perimeter in an adult patient", Dental Press J Orthod, 22, pp.97~108 (2017)
- Gautam P, "Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion : a finite element method study", Am J Orthod Dentofacial Orthop, 132, pp.5. e1~5. e11 (2007)
- Priyadarshini J, "Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion-a finite element method study", Prog Orthod, 18, pp.17~ (2017)
- Knaup B, "Age-related changes in the midpalatal suture. A histomorphometric study", J Orofac Orthop, 65, pp.467~474 (2004)
- Wehrbein H, "The mid-palatal suture in young adults. A radiological-histological investigation", Eur J Orthod, 23, pp.105~114 (2001)
- Kokich VG, "Age changes in the human frontozygomatic suture from 20 to 95 years", Am J Orthod, 69, pp.411~430 (1976)
- Bishara SE, "Maxillary expansion : clinical implications", Am J Orthod Dentofacial Orthop, 91, pp.3~14 (1987)
- Mossaz CF, "Unilateral and bilateral corticotomies for correction of maxillary transverse discrepancies", Eur J Orthod, 14, pp.110~116 (1992)
- Timms DJ, "The relationship of rapid maxillary expansion to surgery with special reference to midpalatal synostosis", Br J Oral Surg, 19, pp.180~196 (1981)
- Korbmacher H, "Age-dependent three-dimensional microcomputed tomography analysis of the human midpalatal suture", J Orofac Orthop, 68, pp.364~376 (2007)
- Matsuyama Y, "Effects of palate depth, modified arm shape, and anchor screw on rapid maxillary expansion : a finite element analysis", Eur J Orthod, 37, pp.188~193 (2015)
- Parcha E, "Morphometric covariation between palatal shape and skeletal pattern in children and adolescents : a cross-sectional study", Eur J Orthod, 39, pp.377~385 (2017)
- Forster CM, "Relationship between dental arch width and vertical facial morphology in untreated adults", Eur J Orthod, 30, pp.288~294 (2008)
- Franchi L, "Transverse maxillary deficiency in Class II and Class III malocclusions : a cephalometric and morphometric study on postero-anterior films", Orthod Craniofac Res, 8, pp.21~28 (2005)
- Angelieri F, "Midpalatal suture maturation : classification method for individual assessment before rapid maxillary expansion", Am J Orthod Dentofacial Orthop, 144, pp.759~769 (2013)
- Grünheid T, "Midpalatal suture density ratio : a novel predictor of skeletal response to rapid maxillary expansion", Am J Orthod Dentofacial Orthop, 151, pp.267~276 (2017)
- Riedel RA, "The relation of maxillary structures to cranium in malocclusion and in normal occlusion", Angle Orthod, 22, pp.142~145 (1952)
- Schudy FF, "The rotation of the mandible resulting from growth : its implications in orthodontic treatment", Angle Orthod, 35, pp.36~50 (1965)
- Persson M, "Palatal suture closure in man from 15 to 35 years of age", Am J Orthod, 72, pp.42~52 (1977)
- Melsen B, "The postnatal development of the palatomaxillary region studied on human autopsy material", Am J Orthod, 82, pp.329~342 (1982)
- Ladewig VM, "Tomographic evaluation of the maturation stage of the midpalatal suture in postadolescents", Am J Orthod Dentofacial Orthop, 153, pp.818~824 (2018)
- Barbosa NMV, "Reliability and reproducibility of the method of assessment of midpalatal suture maturation : a tomographic study", Angle Orthod, 89, pp.71~77 (2019)
- Isaacson RJ, "Forces produced by rapid maxillary expansion", Angle Orthod, 34, pp.256~260 (1964)
- Isaacson RJ, "Forces produced by rapid maxillary expansion", Angle Orthod, 34, pp.261~270 (1964)
- Bouxsein ML, "Guidelines for assessment of bone microstructure in rodents using micro-computed tomography", J Bone Miner Res, 25, pp.1468~1486 (2010)