Three-dimensional evaluation of the relationship between dental and basal arch forms in normal occlusion
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: The purposes of this study were to evaluate the relationship between the dental and basal arch forms; to analyze their differences in the tapered, ovoid, and square arch forms in normal occlusion by using three-dimensional (3D) virtual models; and to test the hypothesis that the overjet and maxillomandibular basal arch width difference have a significantly positive correlation. Methods: Seventy-seven normal occlusion plaster casts were examined by 3D scanning. Facial axis (FA) and WALA points were digitized using the Rapidform 2006 software. The dimensions of the dental and basal arches and the overjet were measured. The samples were classified into 3 groups according to arch forms: tapered (n = 20), ovoid (n = 20), and square (n = 37). Analysis of variance (ANOVA) was used to compare the dental and basal arch dimensions. The Pearson correlation coefficients between the intercanine as well as the intermolar widths at the FA and WALA points were calculated. Results: With regard to the basal arch dimensions, the tapered arch form showed a larger mandibular intermolar depth than the ovoid. Strong correlations were noted between the basal and dental intermolar widths in both the upper and lower arches (r = 0.83 and 0.85, respectively). Moderate correlation was found between the upper and lower intercanine widths (r = 0.65 and 0.48, respectively). Conclusions: The 3 dental arch form groups differed only in some dimensions of the skeletal arch. Moderate correlations were found between the basal and dental intercanine widths. These findings suggest that the basal arch may not be a principle factor in determining the dental arch form.
Abstract
Objective: The purposes of this study were to evaluate the relationship between the dental and basal arch forms; to analyze their differences in the tapered, ovoid, and square arch forms in normal occlusion by using three-dimensional (3D) virtual models; and to test the hypothesis that the overjet and maxillomandibular basal arch width difference have a significantly positive correlation. Methods: Seventy-seven normal occlusion plaster casts were examined by 3D scanning. Facial axis (FA) and WALA points were digitized using the Rapidform 2006 software. The dimensions of the dental and basal arches and the overjet were measured. The samples were classified into 3 groups according to arch forms: tapered (n = 20), ovoid (n = 20), and square (n = 37). Analysis of variance (ANOVA) was used to compare the dental and basal arch dimensions. The Pearson correlation coefficients between the intercanine as well as the intermolar widths at the FA and WALA points were calculated. Results: With regard to the basal arch dimensions, the tapered arch form showed a larger mandibular intermolar depth than the ovoid. Strong correlations were noted between the basal and dental intermolar widths in both the upper and lower arches (r = 0.83 and 0.85, respectively). Moderate correlation was found between the upper and lower intercanine widths (r = 0.65 and 0.48, respectively). Conclusions: The 3 dental arch form groups differed only in some dimensions of the skeletal arch. Moderate correlations were found between the basal and dental intercanine widths. These findings suggest that the basal arch may not be a principle factor in determining the dental arch form.
참고문헌 (44)
- Betts NJ, "Diagnosis and treatment of transverse maxillary deficiency", Int J Adult Orthodon Orthognath Surg, 10, pp.75~96 (1995)
- Lundström AF, "Malocclusion of the teeth regarded as a problem in connection with the apical base", Int J Orthod Oral Surg Radiogr, 9, pp.591~1133 (1925)
- Proffit WR, "Orthodontic treatment planning: limitations, controversies, and special problems. IN Contemporary orthodontics", pp.276~279 (2000), St Louis: Mosby
- Strang RHW, "The fallacy of denture expansion as a treatment procedure", Angle Orthod, 19, pp.12~22 (1949)
- Handelman CS, "The anterior alveolus: its importance in limiting orthodontic treatment and its influence on the occurrence of iatrogenic sequelae", Angle Orthod, 66, pp.95~109 (1996)
- Johnson KC, "Cases six years postretention", Angle Orthod, 47, pp.210~221 (1977)
- Little RM, "Stability and relapse of mandibular anterior alignment-first premolar extraction cases treated by traditional edgewise orthodontics", Am J Orthod, 80, pp.349~365 (1981)
- Shapiro PA, "Mandibular dental arch form and dimension. Treatment and postretention changes", Am J Orthod, 66, pp.58~70 (1974)
- Carmen M, "Periodontal evaluation in patients undergoing maxillary expansion", J Craniofac Surg, 11, pp.491~494 (2000)
- orthodontic interrelationships. In Orthodontics, current principles and techniques, "Periodontal", pp.1994, Vanarsdall RL
- Vanarsdall RL Jr, "Transverse dimension and long-term stability", Semin Orthod, 5, pp.171~180 (1999)
- Vanarsdall RL, "Three-dimensional analysis for skeletal problems", Int J Adult Orthodon Orthognath Surg, 9, pp.159~ (1994)
- Andrews LF, "The six elements of orofacial harmony", Andrews J, 1, pp.13~22 (2000)
- Ball RL, "Comparison of dental and apical base arch forms in Class II Division1 and Class I malocclusions", Am J Orthod Dentofacial Orthop, 138, pp.41~50 (2010)
- Gupta D, "Comparison of the mandibular dental and basal arch forms in adults and children with Class I and Class II malocclusions", Am J Orthod Dentofacial Orthop, 138(10), pp.e1~8 (2010)
- Ronay V, "Mandibular arch form: the relationship between dental and basal anatomy", Am J Orthod Dentofacial Orthop, 134, pp.430~438 (2008)
- Kim SC, "A study on the configurations of Korean normal dental arches for preformed arch wire", Korean J Orthod, 14, pp.93~101 (1984)
- Kook YA, "Comparison of arch forms between Korean and North American white populations", Am J Orthod Dentofacial Orthop, 126, pp.680~686 (2004)
- Merz ML, "Tooth diameters and arch perimeters in a black and a white population", Am J Orthod Dentofacial Orthop, 100, pp.53~58 (1991)
- Nojima K, "A comparative study of Caucasian and Japanese mandibular clinical arch forms", Angle Orthod, 71, pp.195~200 (2001)
- Nummikoski P, "Dental and mandibular arch widths in three ethnic groups in Texas: a radiographic study", Oral Surg Oral Med Oral Pathol, 65, pp.609~617 (1988)
- 윤영국, "한국인 정상교합자의 하악 치열궁 형태", 대한치과교정학회지, 34(6), pp.481~487 (2004), 대한치과교정학회
- Bayome M, "Comparison of arch form between Egyptian and North American white populations", Am J Orthod Dentofacial Orthop, 139, pp.e245~252 (2011)
- Cordato MA, "A simple mathematical study of anterior dental relations: Part I", Aust Orthod J, 13, pp.249~252 (1995)
- Cordato MA, "A mathematical study of anterior dental relations: Part II, Incisor and canine overjet", Aust Orthod J, 14, pp.143~149 (1996)
- Cordato MA, "A simple mathematical study of anterior dental relations: Part III: incisor and canine overbite", Aust Orthod J, 15, pp.75~84 (1998)
- Ferrario VF, "Maxillary versus mandibular arch form differences in human permanent dentition assessed by Euclidean-distance matrix analysis", Arch Oral Biol, 39, pp.135~139 (1994)
- Ferrario VF, "Mathematical definition of the shape of dental arches in human permanent healthy dentitions", Eur J Orthod, 16, pp.287~294 (1994)
- Lee YC, "A study on the dental arch by occlusogram in normal occlusion", Korean J Orthod, 17, pp.279~287 (1987)
- Kook YA, "Overjet at the anterior and posterior segments: three-dimensional analysis of arch coordination", Angle Orthod, 79, pp.495~501 (2009)
- Triviño T, "A new concept of mandibular dental arch forms with normal occlusion", Am J Orthod Dentofacial Orthop, 133(10), pp.e15~22 (2008)
- Kim BI, "Comparison of overjet among 3 arch types in normal occlusion", Am J Orthod Dentofacial Orthop, 139, pp.e253~260 (2011)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Felton JM, "A computerized analysis of the shape and stability of mandibular arch form", Am J Orthod Dentofacial Orthop, 92, pp.478~483 (1987)
- Pepe SH, "Polynomial and catenary curve fits to human dental arches", J Dent Res, 54, pp.1124~1132 (1975)
- Fujita K, "Patterning of human dental arch wire blanks using a vector quantization algorithm", Angle Orthod, 72, pp.285~294 (2002)
- Sergl HG, "A method of measuring the apical base", Eur J Orthod, 18, pp.479~483 (1996)
- Tweed CH, "A philosophy of orthodontic treatment", Am J Orthod Oral Surg, 31, pp.74~103 (1945)
- Hesby RM, "Transverse skeletal and dentoalveolar changes during growth", Am J Orthod Dentofacial Orthop, 130, pp.721~731 (2006)
- Quimby ML, "The accuracy and reliability of measurements made on computer-based digital models", Angle Orthod, 74, pp.298~303 (2004)
- Zilberman O, "Evaluation of the validity of tooth size and arch widthmeasurements using conventional and three-dimensional virtual orthodotic models", Angle Orthod, 73, pp.301~306 (2003)
- Costalos PA, "Evaluation of the accuracy of digital model analysis for the American Board of Orthodontics objective grading system for dental casts", Am J Orthod Dentofacial Orthop, 128, pp.624~629 (2005)
- Sangcharearn Y, "Effect of incisor angulation on overjet and overbite in class II camouflage treatment. A typodont study", Angle Orthod, 77, pp.1011~1018 (2007)
- Lowe DW, "The effect of labiolingual tooth dimension on proper overbite and overjet", Northwest Dent Res, 7, pp.31~43 (1997)