Effect of bone-borne maxillary skeletal expanders on cranial and circummaxillary sutures: A cone-beam computed tomography study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: Miniscrew-assisted maxillary expansion devices are frequently used for patients with calcified midpalatal sutures. This study aimed to evaluate the effects of two bone-borne maxillary expansion appliances on the cranial and circummaxillary sutures by comparing cone-beam computed tomography (CBCT) images before and after transverse maxillary expansion. Methods: A total of 81 patients (women = 58, men = 23) were treated with either a C-expander (n = 44) or an ATOZ expander (n = 37). CBCT images were obtained before (T0) and after (T1) maxillary expansion, and the widths of 10 circummaxillary sutures were measured in the sagittal, coronal, and axial planes. The Wilcoxon signed-rank test was used to compare the changes in suture width between the C-expander and ATOZ groups, and statistical significance was set at P < 0.05. Results: The frontonasal, frontomaxillary, pterygomaxillary, nasomaxillary, internasal, intermaxillary, and midpalatal suture widths increased significantly after maxillary expansion in both the ATOZ and C-expander groups (both P < 0.05). The frontozygomatic, zygomaticomaxillary, and temporozygomatic suture widths decreased in the C-expander group (P < 0.05), whereas the frontozygomatic suture width increased significantly in the ATOZ group (P < 0.05). The width changes of the frontozygomatic, zygomaticomaxillary, temporozygomatic, pterygomaxillary, internasal, intermaxillary, and midpalatal sutures differed significantly between the two groups (P < 0.05). Conclusions: Both the C- and ATOZ expanders affected the suture width in the naso-maxillozygomatic region. The C-expander decreased the circum-zygomatic suture widths, whereas the ATOZ expander widened the frontozygomatic suture with no effect on other circummaxillary sutures.
Abstract
Objective: Miniscrew-assisted maxillary expansion devices are frequently used for patients with calcified midpalatal sutures. This study aimed to evaluate the effects of two bone-borne maxillary expansion appliances on the cranial and circummaxillary sutures by comparing cone-beam computed tomography (CBCT) images before and after transverse maxillary expansion. Methods: A total of 81 patients (women = 58, men = 23) were treated with either a C-expander (n = 44) or an ATOZ expander (n = 37). CBCT images were obtained before (T0) and after (T1) maxillary expansion, and the widths of 10 circummaxillary sutures were measured in the sagittal, coronal, and axial planes. The Wilcoxon signed-rank test was used to compare the changes in suture width between the C-expander and ATOZ groups, and statistical significance was set at P < 0.05. Results: The frontonasal, frontomaxillary, pterygomaxillary, nasomaxillary, internasal, intermaxillary, and midpalatal suture widths increased significantly after maxillary expansion in both the ATOZ and C-expander groups (both P < 0.05). The frontozygomatic, zygomaticomaxillary, and temporozygomatic suture widths decreased in the C-expander group (P < 0.05), whereas the frontozygomatic suture width increased significantly in the ATOZ group (P < 0.05). The width changes of the frontozygomatic, zygomaticomaxillary, temporozygomatic, pterygomaxillary, internasal, intermaxillary, and midpalatal sutures differed significantly between the two groups (P < 0.05). Conclusions: Both the C- and ATOZ expanders affected the suture width in the naso-maxillozygomatic region. The C-expander decreased the circum-zygomatic suture widths, whereas the ATOZ expander widened the frontozygomatic suture with no effect on other circummaxillary sutures.
참고문헌 (32)
- Lagravère MO, "Transverse, vertical, and anteroposterior changes from bone-anchored maxillary expansion vs traditional rapid maxillary expansion : a randomized clinical trial", Am J Orthod Dentofacial Orthop, 137, pp.304~ (2010)
- Gautam P, "Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion : a finite element method study", Am J Orthod Dentofacial Orthop, 132, pp.5~ (2007)
- Gardner GE, "Cranioskeletal displacements caused by rapid palatal expansion in the rhesus monkey", Am J Orthod, 59, pp.146~155 (1971)[DOI]
- Garrett BJ, "Skeletal effects to the maxilla after rapid maxillary expansion assessed with cone-beam computed tomography", Am J Orthod Dentofacial Orthop, 134, pp.8~9 (2008)[DOI]
- Baer MJ, "Patterns of growth of the skull as revealed by vital staining", Hum Biol, 26, pp.80~126 (1954)
- Starnbach H, "Facioskeletal and dental changes resulting from rapid maxillary expansion", Angle Orthod, 36, pp.152~164 (1966)
- Ghoneima A, "Effects of rapid maxillary expansion on the cranial and circummaxillary sutures", Am J Orthod Dentofacial Orthop, 140, pp.510~519 (2011)[DOI]
- 2.0.Co;2,
- Leonardi R, "Early post-treatment changes of circumaxillary sutures in young patients treated with rapid maxillary expansion", Angle Orthod, 81, pp.36~41 (2011)[DOI]
- Leonardi R, "Rapid maxillary expansion affects the spheno-occipital synchondrosis in youngsters. A study with low-dose computed tomography", Angle Orthod, 80, pp.106~110 (2010)[DOI]
- Jin B, "The design of bone-borne maxillary expander affects the different dentoalveolar inclination and expansion pattern: a CBCT study", Semin Orthod (2024)[DOI]
- Braun S, "The biomechanics of rapid maxillary sutural expansion", Am J Orthod Dentofacial Orthop, 118, pp.257~261 (2000)[DOI]
- Park JJ, "Skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion in young adults : a cone-beam computed tomography study", Korean J Orthod, 47, pp.77~86 (2017)[DOI]
- Jafari A, "Study of stress distribution and displacement of various craniofacial structures following application of transverse orthopedic forces-a three-dimensional FEM study", Angle Orthod, 73, pp.12~20 (2003)
- Sun Z, "Mechanical strain at alveolar bone and circummaxillary sutures during acute rapid palatal expansion", Am J Orthod Dentofacial Orthop, 139, pp.e219~e228 (2011)[DOI]
- Hartono N, "The difference of stress distribution of maxillary expansion using rapid maxillary expander(RME)and maxillary skeletal expander(MSE)-a finite element analysis", Prog Orthod, 19, pp.33~ (2018)[DOI]
- Mao JJ, "Mechanobiology of craniofacial sutures", J Dent Res, 81, pp.810~816 (2002)[DOI]
- Isaacson RJ, "Forces produced by rapid maxillary expansion: II. forces present during treatment", Angle Orthod, 34, pp.261~270 (1964)
- Prado GP, "Stability of surgically assisted rapid palatal expansion with and without retention analyzed by 3-dimensional imaging", Am J Orthod Dentofacial Orthop, 145, pp.610~616 (2014)[DOI]
- de Oliveira CB, "Microimplant assisted rapid palatal expansion vs surgically assisted rapid palatal expansion for maxillary transverse discrepancy treatment", Am J Orthod Dentofacial Orthop, 159, pp.733~742 (2021)[DOI]
- Ahmida A, "Short-term and long-term effects of miniscrew-assisted and conventional rapid palatal expansion on the cranial and circummaxillary sutures", Am J Orthod Dentofacial Orthop, 163, pp.e115~e126 (2023)[DOI]
- Kim JW, "Comparison of geometric changes in basal arch form after maxillary expansion between pure bone-borne and tissue-bone-borne appliance", Semin Orthod (2024)[DOI]
- Choi JY, "Finite element analysis of C-expanders with different vertical vectors of anchor screws", Am J Orthod Dentofacial Orthop, 159, pp.799~807 (2021)[DOI]
- Cho AR, "Short-term effects of microimplant-assisted rapid palatal expansion on the circummaxillary sutures in skeletally mature patients : a cone-beam computed tomography study", Am J Orthod Dentofacial Orthop, 161, pp.e187~e197 (2022)[DOI]
- Isaacson RJ, "Forces produced by rapid maxillary expansion: I. design of the force measuring system", Angle Orthod, 34, pp.256~260 (1964)
- Kopher RA, "Suture growth modulated by the oscillatory component of micromechanical strain", J Bone Miner Res, 18, pp.521~528 (2003)[DOI]
- Storey E, "Tissue response to the movement of bones", Am J Orthod, 64, pp.229~247 (1973)[DOI]
- Dibbs RP, "Distraction osteogenesis : mandible and maxilla", Facial Plast Surg, 37, pp.751~758 (2021)[DOI]
- Park JJ, "Critical issues concerning miniscrew-assisted rapid palatal expanders: a narrative review", Semin Orthod (2024)[DOI]
- Choo H, "Growth of the maxillary apical base in post-adolescents with craniofacial dysmorphism using ATOZTM orthodontic distraction osteogenesis", Semin Orthod (2024)[DOI]
- Castello JR, "Craniofacial shortening by contraction osteogenesis : an experimental model", Plast Reconstr Surg, 105, pp.617~625 (2000)
- Roberts WE, "Orthodontics: current principles and techniques", pp.100~149 (2017), Elsevier