성형작약 제트를 이용한 Ammonium DiNitramide (ADN) 단일추진제 추력기 성능 분석
Performance Analysis of Ammonium DiNitramide (ADN)-Based Monopropellant Thruster Using Shaped Charge Jet
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A performance analysis using CFD (Computational Fluid Dynamics) simulation was carried out for the solid propellant engine based on shaped charge jet. The purpose of this study is to find the optimal thrust efficiency geometry according to the change of propellants and nozzle shapes. In order to improve the thrust efficiency in relation to weight, the shape and weight of the engine were modified with the shaped charge principle. The thrusters of various shapes were modeled, and thrust performance was analyzed through CFD simulations. The results show that the shape of the propellants and nozzles using the shaped charge jet was the efficient thruster modeling relative to weight.
Abstract
A performance analysis using CFD (Computational Fluid Dynamics) simulation was carried out for the solid propellant engine based on shaped charge jet. The purpose of this study is to find the optimal thrust efficiency geometry according to the change of propellants and nozzle shapes. In order to improve the thrust efficiency in relation to weight, the shape and weight of the engine were modified with the shaped charge principle. The thrusters of various shapes were modeled, and thrust performance was analyzed through CFD simulations. The results show that the shape of the propellants and nozzles using the shaped charge jet was the efficient thruster modeling relative to weight.
참고문헌 (14)
- Negri, M., , 7th European Conference for Aeronautics and Space Sciences, 10, pp.1~13 (2017)
- Sul, M. J., , Proceedings of the Korean Society of Propulsion Engineers Spring Conference, pp.978~983 (2017)
- Kim, H. J., , Proceedings of the Korean Society of Propulsion Engineers Spring Conference, pp.245~252 (2019)
- 박형규, "성형작약탄 금속제트 산란을 위한 대전류 펄스의 수치해석적 연구", 대한기계학회논문집 A, 39(1), pp.55~62 (2015), 대한기계학회
- Ryu, D. H., , Proceedings of the Korean Society of Propulsion Engineers Fall Conference, pp.1331~1333 (2016)
- 이시은, "정밀선상성형장약의 침투·관통 성능에 관한 연구", 한국항공우주학회지, 47(6), pp.397~404 (2019), 한국항공우주학회
- 박병찬, "유연성 선형 성형작약 개발에 관한 연구", 한국군사과학기술학회지, 12(3), pp.378~387 (2009), 한국군사과학기술학회
- 정종길, "CFD를 이용한 고압파이프 파단 시 초음속제트의 압축성유동 특성에 관한 수치해석", 대한기계학회논문집 B, 41(10), pp.649~657 (2017), 대한기계학회
- Larsson, A., "Advances in Spacecraft Technologies", pp.141~ (2011), Books on Demand
- 서상규, "고체 로켓 노즐의 경계층 해석과 유한차분법을 이용한 탄소", 페놀릭의 열반응 해석 연구, 2018, pp.22(1), 36~44[DOI]
- 신상묵, "비압축성 자유표면 유동에서 갇힌 기체의 등엔트로피 및등온과정에 따른 공기 완충 효과 변화", 한국전산유체공학회지, 24(3), pp.76~83 (2019), 한국전산유체공학회
- 정기연, "직선형 핀틀 노즐의 길이비에 따른 정상상태와 비정상상태 특성 연구", 한국추진공학회지, 22(3), pp.28~39 (2018), 한국추진공학회[DOI]
- 남창호, "액체산소", 케로신 가스발생기 사이클 액체로켓엔진 터빈 노즐목 면적 변화 추정 방법, 2019, pp.23(5), 101~106[DOI]
- 정석용, "피로파괴 이론과 FEM에 기초한 발사 및 궤도 환경에서의 기판 및 소자의 구조건전성 분석", 한국항공우주학회지, 39(10), pp.952~958 (2011), 한국항공우주학회