A study on the effect of material impurity concentration on radioactive waste levels for plans for decommissioning of nuclear power plant
5
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Co and Eu impurities in the SSCs are nuclides that dominantly influence the neutron-induced radioactive inventory in metal and concrete radwastes (radioactive wastes) during NPP decommission. The impurity concentrations provided by NUREG/CR-3474 were used for the practical range of Co and Eu impurity concentrations to be applied to the code calculations. Metal structures near the core were evaluated to be ILW (intermediate-level waste) for the whole range of Co impurity concentration, so the boundary line between ILW and LLW (low-level waste) has no change for the whole concentration range provided by NUREG/CR-3474. Also, the boundary line between VLLW (very low-level waste) and CW (clearance waste) in the concrete shield could alter a little depending on the Eu impurity concentration within the range provided by NUREG/CR-3474. From this work, it is found that the concentration of material impurities of SSCs gives no critical impact on determining radwaste levels.
Abstract
Co and Eu impurities in the SSCs are nuclides that dominantly influence the neutron-induced radioactive inventory in metal and concrete radwastes (radioactive wastes) during NPP decommission. The impurity concentrations provided by NUREG/CR-3474 were used for the practical range of Co and Eu impurity concentrations to be applied to the code calculations. Metal structures near the core were evaluated to be ILW (intermediate-level waste) for the whole range of Co impurity concentration, so the boundary line between ILW and LLW (low-level waste) has no change for the whole concentration range provided by NUREG/CR-3474. Also, the boundary line between VLLW (very low-level waste) and CW (clearance waste) in the concrete shield could alter a little depending on the Eu impurity concentration within the range provided by NUREG/CR-3474. From this work, it is found that the concentration of material impurities of SSCs gives no critical impact on determining radwaste levels.
참고문헌 (10)
- "Metal stiSeries No. 389", ~ (1998)
- Classification of Radioactive Waste, "IAEA", ~, pp.General Safety Guide No, GSG-1 (2009)
- Long-Lived Activation Inventory, "J. C. Evans", ~, pp.NUREG (1984), CR-3474
- MCNP6 User's Manual, Version 1.0, "D. B. Pelowitz", Los Alamos National Laboratory, ~, pp.LA-CP-13-00634 (2013)
- COUPLE: A Nuclear Decay and Cross Section Data Processing Code for Creating ORIGEN-S Libraries, Ver. 6.1, "I. C. Gauld", Oak Ridge National Laboratory, ~ (2011)
- Cha Gilyong, "A Comparative Study on Effective One-Group Cross-Sections of ORIGEN and FISPACT to Calculate Nuclide Inventory for Decommissioning Nuclear Power Plant", 방사선방어학회지, 47(2), pp.99~106 (2022), 테스트학회[DOI]
- ORIGEN-S: Depletion Module to Calculate Neutron Activation, Actinide Transmutation, Fission Product Generation, and Radiations Source Terms, Ver. 6.1, "I. C. Gauld", Oak Ridge National Laboratory, ~ (2011)
- Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding), "ASTM", ~, pp.ASTM B353-12-1 (2022)
- Application and Validation of the NAGRA Activation Calculation Methodology to the Beznau NPP and Development of a Packaging Concept for RPV and Internals, "Paolo Giunio Pisano", NAGRA, ~ (2018)
- 조동건, "RADIOLOGICAL CHARACTERISTICS OF DECOMMISSIONING WASTE FROM A CANDU REACTOR", Nuclear Engineering and Technology, 43(6), pp.583~592 (2011), 한국원자력학회