Thickness measurements of a Cr coating deposited on Zr-Nb alloy plates using an ECT pancake sensor
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Zr-Nb alloy have been widely used as fuel rods in nuclear power plants. However, from the Fukushima nuclear accident, the weakness of the rod was revealed under harsh conditions, and research on the safety of these types of rods was conducted after the disaster. The method of depositing chromium onto the existing Zr-Nb alloy fuel rods is being considered as a means by which to compensate for the weakness of Zr-Nb alloy rods because chromium is strong against oxidation at high temperatures and has high strength. In order to secure these advantages, it is important to maintain the Cr thickness of the rods and properly inspect the rods before and during their use in power generation. Eddy current testing is a typical means of evaluating the thickness of thin metals and detecting surface defects. Depending on the size and shape of the inspected object, various eddy current sensors can be applied. In particular, because pancake sensors can be manufactured in very small sizes, they can be used for inspections even in narrow spaces, such as a nuclear fuel assembly. In this study, an eddy current technique was developed to confirm the feasibility of Cr coating thickness evaluations. After determining the design parameters of the pancake sensor by means of a FEM simulation, a FPCB pancake sensor was manufactured and the optimal frequency was selected by measuring minute changes in the Cr-coating thickness using the developed sensor
Abstract
Zr-Nb alloy have been widely used as fuel rods in nuclear power plants. However, from the Fukushima nuclear accident, the weakness of the rod was revealed under harsh conditions, and research on the safety of these types of rods was conducted after the disaster. The method of depositing chromium onto the existing Zr-Nb alloy fuel rods is being considered as a means by which to compensate for the weakness of Zr-Nb alloy rods because chromium is strong against oxidation at high temperatures and has high strength. In order to secure these advantages, it is important to maintain the Cr thickness of the rods and properly inspect the rods before and during their use in power generation. Eddy current testing is a typical means of evaluating the thickness of thin metals and detecting surface defects. Depending on the size and shape of the inspected object, various eddy current sensors can be applied. In particular, because pancake sensors can be manufactured in very small sizes, they can be used for inspections even in narrow spaces, such as a nuclear fuel assembly. In this study, an eddy current technique was developed to confirm the feasibility of Cr coating thickness evaluations. After determining the design parameters of the pancake sensor by means of a FEM simulation, a FPCB pancake sensor was manufactured and the optimal frequency was selected by measuring minute changes in the Cr-coating thickness using the developed sensor
참고문헌 (22)
- Jong Min Lee, "Creep behaviors of stress-relieved and annealed Zr-1.0Nb-0.7Sn-0.1Fe nuclear cladding tubes at intermediate temperatures", Appl. Mech. Mater, 248, pp.343~348 (2012)
- L. A. Karpyuk, "Accident tolerant fuel with chromium-coated fuel-rod cladding", Atom. Energy, 130(4), pp.149~155 (2021)
- Structural Deformation Evaluation of Spent Nuclear Fuel for Dry Storage, "KAERI", ~ (2010)
- E. P Lee, "Non-and destructive measurements on oxide thicknesses of spent fuel cladding", Korean Nuclear Society Conference (2003)
- Woong-Ki Kim, "A study on the non-destructive inspection for end closure welding of nuclear fuel elements for the irradiation test", The Korean Welding and Joining Society Conference (2004)
- M. B. Kishore, "Characterization of defects on rail surface using eddy current technique", Journal of Mechanical Science and Technology, 33(9), pp.4209~4215 (2019), 대한기계학회
- Satish S. Udpa, "Electromagnetic Testing Hand Book", ASNT
- Donald J. Hagemaier, "Fundamentals of Eddy Current Testing", ASNT
- 신영길, "유한요소해석에 의한 절대코일 와전류 신호의 임피던스 평면도 작성", 비파괴검사학회지, 24(4), pp.315~324 (2004), 한국비파괴검사학회
- Sister rod nondestructive examination final report, "R. Montgomery", ~ (2018)
- Jong Min Kim, "Study of Eddy Current Testing Method for Evaluating Property of Interface in Thermal Barrier Coating", pp.2017
- Jeong Won Park, "Inchul back, rail surface defect detection and analysis using multi-channel eddy current method based", Algorithm for Defect Evaluation, 40, pp.83~ (2021)
- Donizete A. Alencar, "eddy current NDT: a suitable tool to measure oxide layer thickness in PWR fuel rods", International Nuclear Atlantic Conferences (2009)
- B. Andersson, "Measurements of fuel components by multi frequency eddy current technique - F-SECT", International Conference on WWER Fuel Performance, Modelling and Experimental Support (2020)
- G. Antonelli, "Swept frequency eddy current technique for pool-side inspection of Zr-alloy fuel assembly members", HotLab Conference (2015)
- Qualification of the Frequency-Scanning Eddy Current Technique for LWR Fuel Assembly Structural Components under Simulated Poolside Conditions, Technical Report, "EPRI", ~ (2013)
- John Beale, "Estimation of hydrogen in zircaloy using multi frequency eddy current", European Nuclear Society Conferences (2018)
- Deqiang Zhou, "Influence of key factors on Eddy current testing sensitivity and monotonicity on subsurface depth for ferromagnetic and non-ferromagnetic material", Sensor. Actuator. A, 278, pp.98~110 (2018)
- assessment of Nondestructive Evaluation methods for Advanced Technology Fuels, An Inspection Approach Using the Frequency Scanning Eddy Current Technique, "EPRI", ~ (2019)
- 박정원, "Thickness evaluation of Cr coating fuel rod using encircle ECT sensor", Nuclear Engineering and Technology, 54(9), pp.3272~3282 (2022), 한국원자력학회[DOI]
- Ron Simpson, "Nondestructive Evaluation of Materials, 17, ASM Handbook" (1989), Bombardier
- R. Hughes, "Near electrical resonance signal enhancement(NERSE)in eddy-current crack detection", NDT&E International, 66, pp.82~89 (2014)