해수용액에서 선박용 Al-Mg-Si 합금의 전기화학적 실험에 의한 방식전위 결정
The Protection Potential Decision by Electrochemical Experiment of Al-Mg-Si Alloy for Ship in Seawater
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The many vessels are built with FRP(Fiber-Reinforced Plastic) material for small boats and medium vessels. However, FRP is impossible to be used for recyclable material owing to environmental problems and causes large proportion of collision accidents because radar reflection wave is so weak that large vessels could not detect FRP ships during the sailing. Hence, Al alloy comes into the spotlight to solve these kinds of problems as a new-material for next generation instead of FRP. Al alloy ships are getting widely introduced for fish and leisure boats to save fuel consumption due to lightweight. In this study, it was selected 6061-T6 Al alloy which are mainly used for Al-ships and carried out various electrochemical experiment such as potential, anodic/cathodic polarization, Tafel analysis, potentiostatic experiment and surface morphologies observation after potentiostatic experiment for 1200 sec by using the SEM equipment to evaluate optimum corrosion protection potential in sea water. It is concluded that the optimum corrosion protection potential range is -1.4 V ~ -0.7 V(Ag/AgCl) for 6061-T6 Al alloy, in the case of application of ICCP(Impressed current cathodic protection), which was shown the lowest current density at the electrochemical experiment and good specimen surface morphologies after potentiostatic experiment for Al-Mg-Si(6061-T6) Al alloy in seawater environment.
Abstract
The many vessels are built with FRP(Fiber-Reinforced Plastic) material for small boats and medium vessels. However, FRP is impossible to be used for recyclable material owing to environmental problems and causes large proportion of collision accidents because radar reflection wave is so weak that large vessels could not detect FRP ships during the sailing. Hence, Al alloy comes into the spotlight to solve these kinds of problems as a new-material for next generation instead of FRP. Al alloy ships are getting widely introduced for fish and leisure boats to save fuel consumption due to lightweight. In this study, it was selected 6061-T6 Al alloy which are mainly used for Al-ships and carried out various electrochemical experiment such as potential, anodic/cathodic polarization, Tafel analysis, potentiostatic experiment and surface morphologies observation after potentiostatic experiment for 1200 sec by using the SEM equipment to evaluate optimum corrosion protection potential in sea water. It is concluded that the optimum corrosion protection potential range is -1.4 V ~ -0.7 V(Ag/AgCl) for 6061-T6 Al alloy, in the case of application of ICCP(Impressed current cathodic protection), which was shown the lowest current density at the electrochemical experiment and good specimen surface morphologies after potentiostatic experiment for Al-Mg-Si(6061-T6) Al alloy in seawater environment.
참고문헌 (13)
- 김성종, "다양한 용접기술을 적용한 선박용 알루미늄합금의 기계적 특성 평가", 해양환경안전학회지, 13(3), pp.223~228 (2007), 해양환경안전학회
- Min-Su Han, "Optimization of Corrosion Protection Potential for Stress Corrosion Cracking and Hydrogen Embrittlement of 5083-H112 Alloy in Seawater", Metals and Materials International, 14(2), pp.203~211 (2008), 대한금속·재료학회
- 장석기, "마찰교반용접한 5456-H116 알루미늄 합금 용접부 표면의 기계적 및 전기화학적 특성", 한국표면공학회지, 41(4), pp.156~162 (2008), 한국표면공학회
- Byoung-Hyun Yoon, "Corrosion Behavior of Arc Weld and Friction Stir Weld in Al 6061-T6 Alloys", CORROSION SCIENCE AND TECHNOLOGY, 5(6), pp.196~200 (2006), 한국부식방식학회
- 김성종, "6061-T6 합금의 최적 마찰교반 용접 조건 규명 및 전기화학적 특성 평가", 한국표면공학회지, 41(6), pp.341~350 (2008), 한국표면공학회
- Z. Yin, , Corrosion Science and Technology, 5, pp.206~ (2006)
- 우용빈, "선박용 이종 알루미늄 합금 미그 용접부의 기계적 및 전기화학적 특성 평가", 한국표면공학회지, 42(1), pp.34~40 (2009), 한국표면공학회
- 박재철, "알루미늄 5456-H116 합금에 대하여 최적 마찰교반프로세싱 조건 규명 및 기계적 특성 평가", 한국표면공학회지, 42(1), pp.13~20 (2009), 한국표면공학회
- In-Joon Son, "Effect of Annealing on the Pitting Corrosion Resistance of Anodized Aluminum-Magnesium Alloy Processed by Equal Channel Angular Pressing", CORROSION SCIENCE AND TECHNOLOGY, 6(6), pp.275~281 (2007), 한국부식방식학회
- M. Sakairi, "Electrochemical Random Signal Analysis during Localized Corrosion ofAnodized 1100 Aluminum Alloy in Chloride Environments", CORROSION SCIENCE AND TECHNOLOGY, 7(3), pp.168~172 (2008), 한국부식방식학회
- Seong-Jong Kim, "Electrochemical characteristics of Al-Mg alloy in seawater for leisure ship: Stress corrosion cracking and hydrogen embrittlement", The Korean Journal of Chemical Engineering, 26(1), pp.250~257 (2009), 한국화학공학회
- S. J. Kim, , Transaction of nonferrous metals society of china, 19, pp.887~ (2009)
- M. Pourbaix, "Atlas of electrochemical equilibria", NACE, 168 (1974)