Al 6061-T6 합금의 해수 내 캐비테이션 진폭에 따른 캐비테이션-침식 조건하에서 전기화학적 특성
Electrochemical Characteristics with Cavitation Amplitude Under Cavitation Erosion of 6061-T6 in Seawater
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Generally, Al alloys of 5000 and 6000 series show excellent weldability, workability, and specific strength, and are widely used in ship building. A combined experiment via cavitation erosion and corrosion damage involving 6061-T6 Al alloy was performed using potentiodynamic polarization under cavitation erosion (hybrid experiments) with amplitude (cavitation strength). The corrosion current density was approximately 52-fold higher at 30 μm than under static conditions, suggesting that the amplitude greatly affected the damage. The degree of damage increased with increasing cavitation amplitude. After the hybrid experiment, the corrosion rate was compared according to the weight loss and damage depth, and the relationship between the two values was expressed as alpha value. The alpha (α) values at amplitudes of 5 μm, 10 μm and 30 μm were 5.11, 12.81 and 8.74, respectively, suggesting that the α value at 10 μm was greater than at 5 μm, and indicating local corrosion damage. However, the α value at 30 μm was smaller than that of 10 μm, which is attributed to higher damage via uniform corrosion than damage induced by local corrosion.
Abstract
Generally, Al alloys of 5000 and 6000 series show excellent weldability, workability, and specific strength, and are widely used in ship building. A combined experiment via cavitation erosion and corrosion damage involving 6061-T6 Al alloy was performed using potentiodynamic polarization under cavitation erosion (hybrid experiments) with amplitude (cavitation strength). The corrosion current density was approximately 52-fold higher at 30 μm than under static conditions, suggesting that the amplitude greatly affected the damage. The degree of damage increased with increasing cavitation amplitude. After the hybrid experiment, the corrosion rate was compared according to the weight loss and damage depth, and the relationship between the two values was expressed as alpha value. The alpha (α) values at amplitudes of 5 μm, 10 μm and 30 μm were 5.11, 12.81 and 8.74, respectively, suggesting that the α value at 10 μm was greater than at 5 μm, and indicating local corrosion damage. However, the α value at 30 μm was smaller than that of 10 μm, which is attributed to higher damage via uniform corrosion than damage induced by local corrosion.
참고문헌 (20)
- Go Okamoto, "Passive film of 18-8 stainless steel structure and its function", Corrosion Science, 13(6), pp.471~489 (1973), Elsevier BV[DOI]
- H. Soyama, , Proc. of Fluid Eng. Division Summer Meeting, 236, pp.415~ (1996)
- T. Momma, "A study of pressures and erosion produced by collapsing cavitation", Wear, 186-187, pp.425~436 (1995), Elsevier BV[DOI]
- B.K. Sreedhar, "Cavitation damage: Theory and measurements – A review", Wear, 372-373, pp.177~196 (2017), Elsevier BV[DOI]
- Frédéric Caupin, "Cavitation in water: a review", Comptes Rendus Physique, 7(9-10), pp.1000~1017 (2006), Elsevier BV[DOI]
- Leen van Wijngaarden, "Mechanics of collapsing cavitation bubbles", Ultrasonics Sonochemistry, 29, pp.524~527 (2016), Elsevier BV[DOI]
- 양예진, "해수 내 다양한 알루미늄 선박용 재료의 캐비테이션 진폭에 따른 캐비테이션-침식 손상 연구", CORROSION SCIENCE AND TECHNOLOGY, 19(5), pp.250~258 (2020), 한국부식방식학회[DOI]
- 김성종, "선체 재료용 Al-Mg 합금과 Al-Mg-Si 합금의 해수 내 캐비테이션 특성", CORROSION SCIENCE AND TECHNOLOGY, 10(4), pp.136~142 (2011), 한국부식방식학회
- 이승준, "5083-O 알루미늄 합금의 진폭에 따른 캐비테이션 침식 특성 평가", CORROSION SCIENCE AND TECHNOLOGY, 11(5), pp.205~212 (2012), 한국부식방식학회
- 양예진, "선박용 5052-O 알루미늄 합금의 해수 내 진폭 변수에 따른 캐비테이션-침식 손상 특성", CORROSION SCIENCE AND TECHNOLOGY, 19(5), pp.239~249 (2020), 한국부식방식학회[DOI]
- G. Bregliozzi, "Cavitation wear behaviour of austenitic stainless steels with different grain sizes", Wear, 258(1-4), pp.503~510 (2005), Elsevier BV[DOI]
- Denny A. Jones, "Principles and Prevention of CORROSION", pp.129~ (1995), Prentice Hall, Inc
- 이승준, "경금속 표면개질 시 황산 수용액 조건에 따른 내식성 개선 효과", 한국마린엔지니어링학회지, 39(3), pp.223~229 (2015), 한국마린엔지니어링학회[DOI]
- I. C. Park, "A thesis for a doctorate", pp.2018
- I. Hansson, "The dynamics of cavity clusters in ultrasonic (vibratory) cavitation erosion", Journal of Applied Physics, 51(9), pp.4651~4658 (1980), AIP Publishing[DOI]
- D. S. Won, , J. Corros. Sci. Soc. of. Kor, 23, pp.215~ (1994)
- 김영복, "5083-H321 알루미늄 합금의 해수 내 전류밀도의 변화에 따른 전식 특성 연구", 한국표면공학회지, 52(1), pp.23~29 (2019), 한국표면공학회[DOI]
- 장익준, "Effects of Ultrasonic Amplitude on Electrochemical Properties During Cavitation of Carbon Steel in 3.5% NaCl Solution", CORROSION SCIENCE AND TECHNOLOGY, 19(4), pp.163~173 (2020), 한국부식방식학회[DOI]
- S. J Kim, , Corros. Sci. Tech., 11, pp.151~ (2012)
- 김기태, "적층가공 방식으로 제조된 CP-Ti의 캐비테이션 중 부식에 대한 전기화학적 접근", CORROSION SCIENCE AND TECHNOLOGY, 17(6), pp.310~316 (2018), 한국부식방식학회[DOI]