해양환경용 알루미늄 합금 재료의 전기화학적 부식 손상 특성
Electrochemical Corrosion Damage Characteristicsof Aluminum Alloy Materials for Marine Environment
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, various electrochemical experiments were carried out to compare the corrosion characteristics of AA5052-O, AA5083-H321 and AA6061-T6 in seawater. The electrochemical impedance and potentiostatic polarization measurements showed that the corrosion resistance is decreased in the order of AA5052-O, AA5083-H321 and AA6061-T6, with AA5052-O being the highest resistant. This is closely associated with the property of passive film formed on three tested Al alloys. Based on the slope of Mott-Schottky plots of an n-type semiconductor, the density of oxygen vacancies in the passive film formed on the alloys was determined. This revealed that the defect density is increased in the order of AA5052-O, AA5083-H321 and AA6061-T6. Considering these facts, it is implied that the addition of Mg, Si, and Cu to the Al alloys can degrade the passivity, which is characterized by a passive film structure containing more defect sites, contributing to the decrease in corrosion resistance in seawater.
Abstract
In this study, various electrochemical experiments were carried out to compare the corrosion characteristics of AA5052-O, AA5083-H321 and AA6061-T6 in seawater. The electrochemical impedance and potentiostatic polarization measurements showed that the corrosion resistance is decreased in the order of AA5052-O, AA5083-H321 and AA6061-T6, with AA5052-O being the highest resistant. This is closely associated with the property of passive film formed on three tested Al alloys. Based on the slope of Mott-Schottky plots of an n-type semiconductor, the density of oxygen vacancies in the passive film formed on the alloys was determined. This revealed that the defect density is increased in the order of AA5052-O, AA5083-H321 and AA6061-T6. Considering these facts, it is implied that the addition of Mg, Si, and Cu to the Al alloys can degrade the passivity, which is characterized by a passive film structure containing more defect sites, contributing to the decrease in corrosion resistance in seawater.
참고문헌 (30)
- R. Kaibyshev, "Superplastic behavior of an Al–Mg alloy at elevated temperatures", Mater. Sci. Eng. A, 342, pp.169~177 (2003)
- K. A. Yasakau, "Role of intermetallic phases in localized corrosion of AA5083", Electrochim. Acta, 52, pp.7651~7659 (2007)
- A. Aballe, "Localized alkaline corrosion of alloy AA5083 in neutral 3.5% NaCl solution", Corros. Sci, 43, pp.1657~1674 (2001)
- U. Donatus, "Corrosion pathways in aluminium alloys", Trans. Nonferrous Met. Soc. China, 27, pp.55~62 (2017)
- C. Vargel, "Corrosion of aluminium", pp.113~137 (2004), Elsevier
- J. B. Bessone, "An EIS study of aluminium barrier-type oxide films formed in different media", Electrochim. Acta, 37, pp.2283~2290 (1992)
- A. G. Munoz, "Pitting of aluminium in non-aqueous chloride media", Corros. Sci, 41, pp.1447~1463 (1999)
- M. Bethencourt, "The influence of the surface distribution of Al6 (MnFe)intermetallic on the electrochemical response of AA5083 aluminium alloy in NaCl solutions", Materials Science Forum, Trans Tech Publications, 289, pp.567~574 (1998)
- B. Zaid, "Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy", Corros. Sci, 50, pp.1841~1847 (2008)
- P. Arellanes-Lozada, "The inhibition of aluminum corrosion in sulfuric acid by poly(1-vinyl-3-alkyl-imidazolium hexafluorophosphate)", Materials, 7, pp.5711~5734 (2014)
- A. Fattah-alhosseini, "Passivity of AISI 321 stainless steel in 0.5M H2SO4 solution studied by Mott-Schottky analysis in conjunction with the point defect model", Arab. J. Chem, 9, pp.S1342~S1348 (2016)
- K. D. Ralston, "Revealing the relationship between grain size and corrosion rate of metals", Scr. Mater, 63, pp.1201~1204 (2010)
- K. D. Ralston, "Effect of grain size on corrosion: a review", Corros, 66, pp.075005~075005 (2010)
- M. K. Chung, "Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys", Mater. Sci. Eng. A, 366, pp.282~291 (2004)
- T. S. Mahmoud, "Effect of friction stir processing on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy", Proc. IMecha E. C: J. Mechanical Engineering Science, 222, pp.1117~1123 (2008)
- W. R. Osório, "The role of macrostructural morphology and grain size on the corrosion resistance of Zn and Al castings", Mater. Sci. Eng. A, 402, pp.22~32 (2005)
- S. J. Kim, "Electrochemical characteristics of Al-Mg and Al-Mg-Si alloy in sea water", Trans. Nonferrous Met. Soc. China, 22, pp.s881~s886 (2012)
- S. J. Kim, "Mechanical and electrochemical characteristics in sea water of 5052-O aluminum alloy for ship", Trans. Nonferrous Met. Soc. China, 23, pp.636~641 (2013)
- J. D. Kim, "Effects of electrolyte composition and applied potential on the repassivation kinetics of pure aluminium", Electrochem. Acta, 40, pp.1863~1869 (1995)
- 천정균, "황산 용액에서 Al 산화피막의 생성과정 연구", 대한화학회지, 54(4), pp.380~386 (2010), 대한화학회
- O. I. Sekunowo, "Corrosion propensity of cold deformed 5052aluminium alloy in seawater", Br. J. Appl. Sci. Tech, 8, pp.46~52 (2015)
- R. Rosliza, "Corrosion Resistance", pp.377~396 (2012), InTech
- E. M. Sherif, "Corrosion and corrosion inhibition of aluminum in arabian gulf seawater and sodium chloride solutions by 3-Amino-5-Mercapto-1,2,4-triazole", Int. J. Electrochem. Sci, 6, pp.1479~1492 (2011)
- B. T. Lu, "Effects of hydrogen and tensile stress on passivity of carbon steel", Corros. Eng. Sci. Techn, 50, pp.186~190 (2015)
- W. L. Xu, "Stress corrosion cracking behaviour of excimer laser treated aluminium alloy 6013", Mater. Trans, 49, pp.1836~1843 (2008)
- E. Sikora, "Defining the passive state", Solid State Ion, 94, pp.141~150 (1997)
- M. J. Carmezim, "Capacitance behavior of passive films on ferritic and austenitic stainless steel", Corros. Sci, 47, pp.581~591 (2005)
- J. R. Davis, "Alloying : understanding the basics", pp.351~416 (2001), ASM International
- A. Afseth, "Filiform corrosion of binary aluminium model alloys", Corros. Sci, 44, pp.2529~2542 (2002)
- U. Donatus, "Features in aluminium alloy grains and their effects on anodizing and corrosion", Surf. Coat. Tech, 277, pp.91~98 (2015)