Corrosion Behavior Optimization by Nanocoating Layer for Low Carbon Steel in Acid and Salt Media
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, a SiC nano electroless nickel plating layer with excellent corrosion resistance was fabricated using the Taguchi method. The electroless plated low carbon steel was subjected to tests to examine the influence of corrosive media, microhardness, and corrosion rate on the corrosion resistance of this alloy. Three different corrosive media (HCl, Na2SO4, and NaCl) at various temperatures (80, 90, and 100 oC) were used, and at three different times (40, 80, and 120 min.) with a speed of stirring equal to 500 rpm. The results of microhardness were found from 134.276 HV to 278.578 HV at various conditions, while the corrosion rate results were obtained from 0.89643 mpy to 7.12571 mpy at different circumstances. Corrosion, and mechanical characteristics were explained using Taguchi design. Taguchi technique was used to account for all possible combinations of elements in order to conduct a complete study. Models that link the response and procedure parameters were developed using the results of these tests, and the analysis of variance was utilized to validate these models (ANOVA). For maximum efficiency, a function called “desirability” was applied to all responses at once.
Abstract
In this paper, a SiC nano electroless nickel plating layer with excellent corrosion resistance was fabricated using the Taguchi method. The electroless plated low carbon steel was subjected to tests to examine the influence of corrosive media, microhardness, and corrosion rate on the corrosion resistance of this alloy. Three different corrosive media (HCl, Na2SO4, and NaCl) at various temperatures (80, 90, and 100 oC) were used, and at three different times (40, 80, and 120 min.) with a speed of stirring equal to 500 rpm. The results of microhardness were found from 134.276 HV to 278.578 HV at various conditions, while the corrosion rate results were obtained from 0.89643 mpy to 7.12571 mpy at different circumstances. Corrosion, and mechanical characteristics were explained using Taguchi design. Taguchi technique was used to account for all possible combinations of elements in order to conduct a complete study. Models that link the response and procedure parameters were developed using the results of these tests, and the analysis of variance was utilized to validate these models (ANOVA). For maximum efficiency, a function called “desirability” was applied to all responses at once.
참고문헌 (24)
- Joseph R. Davis, "Corrosion: Understanding the basics", pp.1~21 (2000), ASM International
- J.A. Calderón, "Improvement of the erosion-corrosion resistance of magnesium by electroless Ni-P", Ni(OH)2-ceramic nanoparticle composite coatings, 2016, pp.304, 167~178[DOI]
- Ramesh Singh, "Corrosion Control for Offshore Structures: Cathodic Protection and High-Efficiency Coating", pp.115~129 (2014), Gulf Professional Publishing
- Yuantao Zhao, "Microstructure and corrosion behavior of Ti nanoparticles reinforced Ni–Ti composite coatings by electrodeposition", Materials & Design, 85, pp.39~46 (2015), Elsevier BV[DOI]
- V. S. Saji, "Corrosion Protection and Control Using Nanomaterials", pp.3~15 (2012), Wood Head Publishing Limited
- S. Bashir, "Advanced Nanomaterials and Their Applications in Renewable Energy", pp.1~50 (2015), Elsevier Inc
- H. -E. Schaefer, "Nanoscience, Vol. 1" (2010), Springer
- F. Delaunois, "Electroless Nickel Plating: Fundamentals to Applications", pp.v~ (2019), Engineering & Technology, Physical Sciences
- Muroog M. Shinyar, "And Abbas Khammas Hussein, Optimization Of Mechanical Behavior Of Ni-p Nanocomposite Coatings Using Taguchi Approach", International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10, pp.99~ (2021)
- Electroless Nickel Plating, "W. Riedel", ASM International, ~, pp.No. 320 (1991)
- B.-H. Chen, "Effects of Surfactants in an Electroless Nickel-Plating Bath on the Properties of Ni−P Alloy Deposits", Industrial & Engineering Chemistry Research, 41(11), pp.2668~2678 (2002), American Chemical Society (ACS)[DOI]
- Wang-ping Wu, "Effect of plating temperature on electroless amorphous Ni–P film on Si wafers in an alkaline bath solution", Applied Nanoscience, 7(6), pp.325~333 (2017), Springer Science and Business Media LLC[DOI]
- Maryam Masjedi-Arani, "CdSnO3-graphene nanocomposites: Ultrasonic synthesis using glucose as capping agent and characterization for electrochemical hydrogen storage", Ultrasonics Sonochemistry, 61, pp.104840~ (2020), Elsevier BV[DOI]
- Phuong Nguyen-Tri, "Nanocomposite Coatings: Preparation, Characterization, Properties, and Applications", International Journal of Corrosion, 2018, pp.1~19 (2018), Hindawi Limited[DOI]
- Jothi Sudagar, "Electroless nickel, alloy, composite and nano coatings – A critical review", Journal of Alloys and Compounds, 571, pp.183~204 (2013), Elsevier BV[DOI]
- Mehmet Uysal, "Electroless Codeposition of Ni-P Composite Coatings: Effects of Graphene and TiO2 on the Morphology, Corrosion, and Tribological Properties", Metallurgical and Materials Transactions A, 50(5), pp.2331~2341 (2019), Springer Science and Business Media LLC[DOI]
- Munna Ram, "Corrosion Resistance of Electroless Ni-P-SiC", Ni-P-TiO2-ZrO2 Nano-Coatings in Paper Mill Bleach Plant, 2020, pp.21, 1200~1212[DOI]
- Firas F. Sayyid, "Corrosion Protection Effectiveness and Adsorption Performance of Schiff Base-Quinazoline on Mild Steel in HCl Environment", CORROSION SCIENCE AND TECHNOLOGY, 21(2), pp.77~88 (2022), 한국부식방식학회[DOI]
- W. K. Al-Azzawi, "Evaluation of corrosion inhibition characteristics of an N-propionanilide derivative for mild steel in 1 M HCl: Gravimetrical and computational studies", International Journal of Corrosion and Scale Inhibition, 11(3), pp.1100~ (2022), IFHAN[DOI]
- A. M. Mustafa, "3-Nitrobenzaldehyde-4-phenylthiosemicarbazone as Active Corrosion Inhibitor for Mild Steel in a Hydrochloric Acid Environment", Progress in Color Colorants Coating, 15, pp.285~ (2022)[DOI]
- Abbas Hussein, "Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel", Engineering and Technology Journal, 36(10A), pp.1091~1099 (2018), University of Technology[DOI]
- A. Farzaneh, "Corrosion performance of the electroless Ni–P coatings prepared in different conditions and optimized by the Taguchi method", Journal of Applied Electrochemistry, 41(1), pp.19~27 (2010), Springer Science and Business Media LLC[DOI]
- Boby John, "Application of desirability function for optimizing the performance characteristics of carbonitrided bushes", International Journal of Industrial Engineering Computations, 4(3), pp.305~314 (2013), Growing Science[DOI]
- Dong‐Hee Lee, "A desirability function method for optimizing mean and variability of multiple responses using a posterior preference articulation approach", Quality and Reliability Engineering International, 34(3), pp.360~376 (2018), Wiley[DOI]