Development of Ni - Nano Al2O3 coated AISI1018 mild steel composites via pulse electro deposition and investigation of its wear and corrosion behavior
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Scientists attempting to create a variety of tiny industrial components are very interested in AISI1018 mild steel due to itsimproved elasticity, low carbon content, and cost-effectiveness. For different technical and structural requirements, such asmetal panels, engine components, highly pressurized chemical pipelines, machinery parts, and vehicle bonnets, the currentresearch employs mild steel as a cornerstone matrix to generate Ni - Nano Al2O3 Coated AISI1018 Mild Steel Composites. Inorder to determine the ideal Ni - Nano Al2O3 wt. % that displays the best corrosion, mechanical, and surface morphologybehavior, a Ni - Nano Al2O3 coating on mild steel with variable Al2O3 was applied using a reverse pulse electro depositionapproach. According to research observations, increasing the proportion of Al2O3 on the exterior of mild steel has aconsiderable positive impact on mechanical behavior, abrasion resistance, and chemical resistance. Hardness of the HMSAL6samples plated with 3% Al2O3 was 296 HV, which is almost 25% higher than the hardness of the plain samples. Similar studieson corrosion and wear have shown that a 25-40% improvement in corrosion and wear characteristics may be achieved byprogressively increasing the amount of Ni-Al2O3. Through the use of field emission scanning electron microscopy, the efficiencyof the reverse pulse electro deposition technique was also examined. It was discovered from the images that the surface of themild steel is evenly distributed with the included Ni - Nano Al2O3.
Abstract
Scientists attempting to create a variety of tiny industrial components are very interested in AISI1018 mild steel due to itsimproved elasticity, low carbon content, and cost-effectiveness. For different technical and structural requirements, such asmetal panels, engine components, highly pressurized chemical pipelines, machinery parts, and vehicle bonnets, the currentresearch employs mild steel as a cornerstone matrix to generate Ni - Nano Al2O3 Coated AISI1018 Mild Steel Composites. Inorder to determine the ideal Ni - Nano Al2O3 wt. % that displays the best corrosion, mechanical, and surface morphologybehavior, a Ni - Nano Al2O3 coating on mild steel with variable Al2O3 was applied using a reverse pulse electro depositionapproach. According to research observations, increasing the proportion of Al2O3 on the exterior of mild steel has aconsiderable positive impact on mechanical behavior, abrasion resistance, and chemical resistance. Hardness of the HMSAL6samples plated with 3% Al2O3 was 296 HV, which is almost 25% higher than the hardness of the plain samples. Similar studieson corrosion and wear have shown that a 25-40% improvement in corrosion and wear characteristics may be achieved byprogressively increasing the amount of Ni-Al2O3. Through the use of field emission scanning electron microscopy, the efficiencyof the reverse pulse electro deposition technique was also examined. It was discovered from the images that the surface of themild steel is evenly distributed with the included Ni - Nano Al2O3.
참고문헌 (35)
- U. Pandey, , Synth. Met, 290, pp.117135~ (2022)
- F. Mahdi, , J. Energy. Storage, 46, pp.103802~ (2022)
- E. Rahali, , Prog. Org. Coat, 163, pp.106602~ (2022)
- S. Kumar, , Eng. Res. Express, 4, pp.015034~ (2022)
- H. Wang, , Opt. Laser. Technol, 142, pp.107209~ (2021)
- D. Elil Raja, "Tribological and characterization studies of aluminium alloy 6061 reinforcement with aluminium oxide and copper metal matrix composites", Journal of Ceramic Processing Research, 23(6), pp.927~934 (2022), 청정에너지연구소[DOI]
- H. Fan, , Int. J. Mod. Phys. B, 34(27), pp.2050243~ (2020)
- M. Aliofkhazraei, , Appl. Surf. Sci. Adv, 6, pp.100141~ (2021)
- Z. Mahidashti, , Trans. Indian Inst. Met. T, 71, pp.257~295 (2018)
- E. Natarajan, , J. Compos. Sci, 6(10), pp.310~ (2022)
- S. Kaliappan, , J. Nanomater, 2022, pp.5465771~ (2022)
- A. R. Shahmoradi, , J. Mol. Liq, 338, pp.116550~ (2021)
- W. Zhang, , Carbohydr. Polym, 260, pp.117842~ (2021)
- Emanuel X. Ricky, "The study of m-pentadecylphenol on the inhibition of mild steel corrosion in 1 M HCl solution", Journal of Industrial and Engineering Chemistry, 101, pp.359~371 (2021), 한국공업화학회
- M. P. Jahan, , J. Mater. Process. Technol, 209(8), pp.3956~3967 (2009)
- C.C. Satheesh, , J. Polym. Environ, 30(4), pp.1528~1546 (2022)
- Y. Sun, , Surf. Coat. Technol, 368, pp.215~223 (2019)
- S. Thapliya, , J. Mater. Process. Technol, 238, pp.30~38 (2016)
- Girimurugan R, "Experimental investigation and optimization of welding process parameters during friction stir welding of AA1100 using response surface methodology", Journal of Ceramic Processing Research, 23(4), pp.553~557 (2022), 청정에너지연구소[DOI]
- X. Feng, , Surf. Coat. Technol, 333, pp.104~114 (2018)
- Q. Luo, , Surf. Coat. Technol, 309, pp.106~113 (2017)
- W. Qian, , Mater. Lett, 268, pp.127570~ (2020)
- M. Dehestani, , Meas, pp.109423~ (2021)
- X. Chu, , Ceram. Int, 46(6), pp.8413~8419 (2020)
- C. R. Raghavendra, , J. Adhes. Sci. Technol, 36(21), pp.2297~2312 (2021)
- Z. Lin, , Mater. Chem. Phys, 277, pp.125503~ (2022)
- H. Huang, , J. Colloid Interface Sci, 627, pp.705~715 (2022)
- M. Bowkett, , Appl. Sci, 12(9), pp.4283~ (2022)
- Muhammad Shahid, "Synthesis and mechanical characterization of alumina based composite material for armor application", Journal of Ceramic Processing Research, 22(2), pp.149~157 (2021), 청정에너지연구소[DOI]
- J. S. ShathishKumar, , Int. J. Electrochem, 16(4) (2021)
- X. Dai, , J. Electroanal. Chem, 904, pp.115855~ (2022)
- Dae-Seon Lee, "A study on particle morphology and sintering behavior of yttria nano powder according to PVA mixing ratio in polymer solution synthesis route", Journal of Ceramic Processing Research, 23(2), pp.137~144 (2022), 청정에너지연구소[DOI]
- P. Mandal, , Mach. Sci, 25(3), pp.422~437 (2021)
- E. Natarajan, , Def. Technol, 19, pp.1~11 (2023)
- R. Sasikumar, , Mater. Res. Express, 4(8), pp.045310~ (2022)