Control of Galvanic Corrosion Between A516Gr.55 Steel and AA7075T6 Depending on NaCl Concentration and Solution Temperature
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Chloride ion is one of the most important corrosive agents in atmospheric corrosion, especially in marine environments. It has high adsorption rate and increases the conductivity of electrolytes. Since chloride ions affect the protective properties and the surface composition of the corrosion product, they increase the corrosion rate. A low level of chloride ions leads to uniform corrosion, whereas a high level of chloride ions may induce localized corrosion. However, higher solution temperatures tend to increase the corrosion rate by enhancing the migration of oxygen in the solution. This work focused on the effect of NaCl concentration and temperature on galvanic corrosion between A516Gr.55 carbon steel and AA7075T6 aluminum alloys. When AA7075T6 aluminum alloy was galvanically coupled to A516Gr.55 carbon steel, AA7075T6 was severely corroded regardless of NaCl concentration and solution temperature, unlike the corrosion properties of single specimen. The combined effect of surface treatment involving carbon steel and aluminum alloy on corrosion behavior was also discussed.
Abstract
Chloride ion is one of the most important corrosive agents in atmospheric corrosion, especially in marine environments. It has high adsorption rate and increases the conductivity of electrolytes. Since chloride ions affect the protective properties and the surface composition of the corrosion product, they increase the corrosion rate. A low level of chloride ions leads to uniform corrosion, whereas a high level of chloride ions may induce localized corrosion. However, higher solution temperatures tend to increase the corrosion rate by enhancing the migration of oxygen in the solution. This work focused on the effect of NaCl concentration and temperature on galvanic corrosion between A516Gr.55 carbon steel and AA7075T6 aluminum alloys. When AA7075T6 aluminum alloy was galvanically coupled to A516Gr.55 carbon steel, AA7075T6 was severely corroded regardless of NaCl concentration and solution temperature, unlike the corrosion properties of single specimen. The combined effect of surface treatment involving carbon steel and aluminum alloy on corrosion behavior was also discussed.
참고문헌 (21)
- G. T. Seo, , J. Korean Soc. Environ. Eng, 20, pp.1151~ (1998)
- W. S. Chung, , J. Korean Soc. Environ. Eng, 23, pp.1611~ (2001)
- 김기태, "36개월간 국내 옥외폭로시험에 따른 아연도강의 부식거동", CORROSION SCIENCE AND TECHNOLOGY, 17(5), pp.231~241 (2018), 한국부식방식학회[DOI]
- Yarong Song, "Effects of chloride ions on corrosion of ductile iron and carbon steel in soil environments", Scientific Reports, 7(1) (2017), Springer Science and Business Media LLC[DOI]
- Yuantai Ma, "Corrosion of low carbon steel in atmospheric environments of different chloride content", Corrosion Science, 51(5), pp.997~1006 (2009), Elsevier BV[DOI]
- Hanna Pancheva, "Study into the influence of concentration of ions of chlorine and temperature of circulating water on the corrosion stability of carbon steel and cast iron", Eastern-European Journal of Enterprise Technologies, 4(6 (88)), pp.59~64 (2017), Private Company Technology Center[DOI]
- M. Morcillo, "Atmospheric corrosion of mild steel in chloride-rich environments. Questions to be answered", Materials and Corrosion, 66(9), pp.882~892 (2015), Wiley[DOI]
- S. K. Chang, , J. Korean Inst. Surf. Eng., 30, pp.69~ (1997)
- Y. K. Kim, , J. of Korean Society of Environmental Technology, 3, pp.293~ (2002)
- R. W. Revie, "Corrosion and Corrosion Control", pp.121~ (2008), Wiley-Interscience
- 김영식, "Effects of NaCl Concentration and Solution Temperature on the Galvanic Corrosion Between CFRP and A516Gr.55 Carbon Steel", CORROSION SCIENCE AND TECHNOLOGY, 18(4), pp.129~137 (2019), 한국부식방식학회[DOI]
- Hosni Ezuber, "A study on the corrosion behavior of aluminum alloys in seawater", Materials & Design, 29(4), pp.801~805 (2008), Elsevier BV[DOI]
- P. M. Natishan, "Electrochem", J. Electrochem. Soc, 161, pp.C421~ (2014)
- A. A. Younis, "The effect of chloride concentration and pH on pitting corrosion of AA7075 aluminum alloy coated with phenyltrimethoxysilane", Journal of Solid State Electrochemistry, 16(3), pp.1033~1040 (2012), Springer Science and Business Media LLC[DOI]
- B. Zaid, "Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy", Corrosion Science, 50(7), pp.1841~1847 (2008), Elsevier BV[DOI]
- Yafei Wang, "Effect of pH and chloride on the micro-mechanism of pitting corrosion for high strength pipeline steel in aerated NaCl solutions", Applied Surface Science, 349, pp.746~756 (2015), Elsevier BV[DOI]
- Z Szklarska-Smialowska, "Pitting corrosion of aluminum", Corrosion Science, 41(9), pp.1743~1767 (1999), Elsevier BV[DOI]
- I-Wen Huang, "Dependence on Temperature, pH, and Cl− in the Uniform Corrosion of Aluminum Alloys 2024-T3, 6061-T6, and 7075-T6", Electrochimica Acta, 199, pp.242~253 (2016), Elsevier BV[DOI]
- G. S. Frankel, "Pitting Corrosion of Metals: A Review of the Critical Factors", Journal of The Electrochemical Society, 145(6), pp.2186~2198 (1998), The Electrochemical Society[DOI]
- Min Cao, "Influence of Temperature on Corrosion Behavior of 2A02 Al Alloy in Marine Atmospheric Environments", Materials, 11(2), pp.235~ (2018), MDPI AG[DOI]
- 허승영, "Effects of NaCl Concentration and Solution Temperature on the Galvanic Corrosion between CFRP and AA7075T6", CORROSION SCIENCE AND TECHNOLOGY, 19(2), pp.75~81 (2020), 한국부식방식학회[DOI]