본문 바로가기
KERD
논문KCI 등재

The femoral intercondylar notch is an accurate landmark for the resection depth of the distal femur in total knee arthroplasty

2

조회

0

다운로드

0

인용

0

참고문헌

초록

Conventionally, the depth of distal femoral resection in total knee arthroplasty is referenced from the most prominent distal femoral condyle. This surgical technique does not consider pathological alterations of articular surfaces or severity of knee deformity. It has been hypothesized that the femoral intercondylar notch is a clinically reliable and more accurate alternative landmark for the resection depth of the distal femur in primary total knee arthroplasty.The resection depths of the distal femur at the medial and lateral femoral condyles and intercondylar notch were measured using computer navigation in 406 total knee arthroplasties. Variability between the bone resection depths was analyzed by standard deviation, 95% confidence interval and variance. Clinical follow-up of outcome to a minimum of 12 months was performed to further inform and validate the analysis. Mean resection depth of the medial condyle was 10.7 mm, of the lateral condyle 7.9 mm and of the femoral intercondylar notch 1.9 mm. The femoral intercondylar notch had the lowest variance in resection depth among the three landmarks assessed, with a variance of 1.7 mm 2 compared to 2.8 mm 2 for the medial femoral condyle and 5.1 mm 2 for the lateral femoral condyle. The intercondylar notch reference had the lowest standard deviation and 95% confidence interval. The resection depth referencing the notch was not sensitive to the degree of flexion contracture pre-operatively, whereas the medial and lateral condyles were. For varus deformed knees, distal femoral resection depth at the notch averaged 2 mm, which corresponds to the femoral prosthesis thickness at the intercondylar region, while for valgus deformed knees, the resection was flush with the intercondylar notch. The femoral intercondylar notch is a clinically practical and reproducible landmark for appropriate and accurate resection depth of the distal femur in primary total knee arthroplasty.Level III: Retrospective cohort study.

Abstract

Conventionally, the depth of distal femoral resection in total knee arthroplasty is referenced from the most prominent distal femoral condyle. This surgical technique does not consider pathological alterations of articular surfaces or severity of knee deformity. It has been hypothesized that the femoral intercondylar notch is a clinically reliable and more accurate alternative landmark for the resection depth of the distal femur in primary total knee arthroplasty.The resection depths of the distal femur at the medial and lateral femoral condyles and intercondylar notch were measured using computer navigation in 406 total knee arthroplasties. Variability between the bone resection depths was analyzed by standard deviation, 95% confidence interval and variance. Clinical follow-up of outcome to a minimum of 12 months was performed to further inform and validate the analysis. Mean resection depth of the medial condyle was 10.7 mm, of the lateral condyle 7.9 mm and of the femoral intercondylar notch 1.9 mm. The femoral intercondylar notch had the lowest variance in resection depth among the three landmarks assessed, with a variance of 1.7 mm 2 compared to 2.8 mm 2 for the medial femoral condyle and 5.1 mm 2 for the lateral femoral condyle. The intercondylar notch reference had the lowest standard deviation and 95% confidence interval. The resection depth referencing the notch was not sensitive to the degree of flexion contracture pre-operatively, whereas the medial and lateral condyles were. For varus deformed knees, distal femoral resection depth at the notch averaged 2 mm, which corresponds to the femoral prosthesis thickness at the intercondylar region, while for valgus deformed knees, the resection was flush with the intercondylar notch. The femoral intercondylar notch is a clinically practical and reproducible landmark for appropriate and accurate resection depth of the distal femur in primary total knee arthroplasty.Level III: Retrospective cohort study.

관련 논문AI추천

Notching is less, if femoral component sagittal positioning is planned perpendicular to distal femur anterior cortex axis, in navigated TKAKanna Raj, Ravichandran Chandramohan, Shetty Gautam M.대한슬관절학회 · Knee Surgery and Related Research2021 · 제33권 The use of imageless navigation to quantify cutting error in total knee arthroplastyLamb Iain R., Marwin Scott E., Meftah Morteza, Muir Jeffrey M., Schwarzkopf Ran, Zabat Michelle A.대한슬관절학회 · Knee Surgery and Related Research2021 · 제33권 Appropriate determination of the surgical transepicondylar axis can be achieved following distal femur resection in navigation-assisted total knee arthroplasty박철희, 송상준, Kim Kang-il, Lee Hyun Woo대한슬관절학회 · Knee Surgery and Related Research2021 · 제33권 Evaluation of the flexion gap with a distal femoral trial component in posterior-stabilized total knee arthroplastyAdachi Nobuo, Goki Kamei, Hiroyuki Inoue, Koki yoshioka, Masakazu Ishikawa, Satoru Sakurai, Shigeki Ishibashi, Yu Mochizuki대한슬관절학회 · Knee Surgery and Related Research2022 · 제34권 Changes in Femoral Posterior Condylar Offset, Tibial Posterior Slope Angle, and Joint Line Height after Cruciate-Retaining Total Knee Arthroplasty김강일, 배대경, 송상준, 정호연대한슬관절학회 · Knee Surgery and Related Research2016 · 제28권 제1호Posterior condylar offset changes and its effect on clinical outcomes after posteriorsubstituting, fixed-bearing total knee arthroplasty: anterior versus posterior referencing강승백, 이승아, 장문종, Chong Bum Chang, Do Hwan Han, Hyung Jun Park, Il-Ung Hwang, Jisu Park, Keummin Hwang, Sohee Oh대한슬관절학회 · Knee Surgery and Related Research2020 · 제32권

이 간행물의 다른 논문 (44건)