The estimations of planing hull running attitude and resistance by using CFD and Goal Driven Optimization
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As a “"kind of”" mature ship form, planing hull has been widely used in military and civilian areas. Therefore, a reasonable design for planing hull becomes more and more important. For planing hull, resistance and trim are always the most important problems we are concerned with. It affects the planing hull’'s economic efficiency and maneuverability very seriously. Instead of the expensive towing tank experiments, the development of computer comprehensive ability allows us to previously apply computational fluid dynamics(CFD)to the ship design. In this paper, the CFD method and Goal Driven Optimization (GDO) were used in the estimations of planing hull resistance and running attitude to provide a possible method for performance computation of planing hull.
Abstract
As a “"kind of”" mature ship form, planing hull has been widely used in military and civilian areas. Therefore, a reasonable design for planing hull becomes more and more important. For planing hull, resistance and trim are always the most important problems we are concerned with. It affects the planing hull’'s economic efficiency and maneuverability very seriously. Instead of the expensive towing tank experiments, the development of computer comprehensive ability allows us to previously apply computational fluid dynamics(CFD)to the ship design. In this paper, the CFD method and Goal Driven Optimization (GDO) were used in the estimations of planing hull resistance and running attitude to provide a possible method for performance computation of planing hull.
참고문헌 (16)
- Arai M, "A computing method for the analysis of water impact of arbitrary shaped bodies", J Soc Nav Archit Jpn, 176, pp.233~240 (1994)[DOI]
- Anderson JD, "Computational fluid dynamics" (1995), McGraw-Hill, Springer
- Battistin D, "A numerical model for hydrodynamic of planing surfaces", Proc.7th Int. Conf. Fast Sea Transportation FAST2003, pp.33~38 (2003)
- Brizzolara S, "Accuracy of CFD codes in the prediction of planning surfaces hydrodynamic characteristics", .2nd International Conference on marine Research and Transportation, ICMRT'07, pp.28~30 (2007), ISCHIA
- Blount DL, "Reflections on the significance of a landmark study of the hydrodynamics of planing craft", J Professional BoatBuilder, pp.18~36 (2011)
- Hirt CW, "Volume of fluid (VOF) method for the dynamics of free boundaries", J comput phys, 39(1), pp.201~225 (1981)[DOI]
- . Practical Guidelines for Ship CFD Applications, "ITTC-Recommended Procedures and Guidelines", 1~18 (2011)
- Konak A, "Multi-objective optimization using genetic algorithms: A tutorial", J Reliab Eng Sys Safe, 91, pp.992~1007 (2006)[DOI]
- Savitsky D, "Overview of planing hull developments", Pro.HPM, 92, pp.PC1~PC14 (1992), American Society of naval Engineers
- Soremekun GAE, "Genetic algorithms for composite laminate design and optimization" (1997), Virginia Polytechnic Institute and State University
- Savander BR, "Planing hull hydrodynamics", PhD, pp.1997
- Tulin MP, "The theory of slender surfaces planing at high speed", Schiffstechnik, 4, pp.125~ (1956)
- Versteeg HK, "An introduction to computational fluid dynamics" (1995), Pearson Education Limited
- Dong W, "Experimental determination of roll damping of deep-Vee planing craft", J Na Univ Eng, 16(4), pp.26~29 (2004)
- Yang S, "Experimental study on resistance performance of an 11.8 meter gliding-hydrofoil craft", J Jiangsu Univ Sci Technol, 22(2), pp.6~10 (2008)
- Zhao R, "A simplified nonlinear analysis of a high speed planing craft in calm water", Proc. FAST 97Conf., pp.431~ (1997)