Hull-form optimization of a container ship based on bell-shaped modification function
2
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
In the present study, a hydrodynamic hull-form optimization algorithm for a container ship was presented in terms of the minimum wave-making resistance. Bell-shaped modification functions were developed to modify the original hull-form and a sequential quadratic programming algorithm was used as an optimizer. The wave-making resistance as an objective function was obtained by the Rankine source panel method in which non-linear free surface conditions and the trim and sinkage of the ship were fully taken into account. Numerical computation was performed to investigate the validity and effectiveness of the proposed hull-form modification algorithm for the container carrier. The computational results were validated by comparing them with the experimental data.
Abstract
In the present study, a hydrodynamic hull-form optimization algorithm for a container ship was presented in terms of the minimum wave-making resistance. Bell-shaped modification functions were developed to modify the original hull-form and a sequential quadratic programming algorithm was used as an optimizer. The wave-making resistance as an objective function was obtained by the Rankine source panel method in which non-linear free surface conditions and the trim and sinkage of the ship were fully taken into account. Numerical computation was performed to investigate the validity and effectiveness of the proposed hull-form modification algorithm for the container carrier. The computational results were validated by comparing them with the experimental data.
참고문헌 (11)
- Chen, P. F., "An inverse design approach in determining the optimal shape of bulbous bow with experimental verification", Journal of Ship Research, 50(1), pp.1~14 (2006)
- 최희종, "Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation", International Journal of Naval Architecture and Ocean Engineering, 3(4), pp.225~232 (2011), 대한조선학회
- Han, S. H., "Hydrodynamic hull form optimization using parametric models", Journal of Marine Science and Technology, 17(1), pp.1~17 (2012)
- Maisonneuve, J. J., "Towards optimal design of ship hull shapes", Proceedings of the 8th International Marine Design Conference IMDC’03, Athens, Greece, pp.31~42 (2003)
- Peri, D., "High-fidelity models and multiobjective global optimization algorithms in simulationbased design", Journal of Ship Research, 49(3), pp.159~175 (2005)
- Raven, H. C., "A solution method for the nonlinear ship wave resistance problem", 박사, pp.1996
- Suzuki, K., "Studies on the optimization of stern hull-form based on a potential flow solver", Journal of Marine Science and Technology, 10(2), pp.61~69 (2005)
- Tahara, Y., "Computational fluid dynamics-based optimization of surface combatant", Journal of Ship Research, 48(4), pp.273~287 (2004)
- Tahara, Y., "CFD-based multi-objective optimization method for ship design", International Journal for Numerical Methods in Fluids, 52(5), pp.499~527 (2006)
- Zhang, B. J., "Research on optimization of hull lines for minimum resistance based on rankine source method", Journal of Marine Science and Technology, 20(1), pp.89~94 (2012)
- Zhang, B. J., "The optimization of the hull-form with the minimum wave making resistance based on rankine source method", Journal of Hydrodynamics, Series B, 21(2), pp.277~284 (2009)