The Microleakage in Class V Cavity Based on Different Kinds of Several Dentin Adhesive and Composite Resin
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In order to explore microleakage in class V cavity based on different kinds of several dentin adhesive and composite resin, 2 kinds of composite resin was restored and exposed after applying 4 kinds of dentin adhesives. Deposited in methylene blue solution for 4 hours and cut in parallel with tooth longitudinal axis. By observing dye penetration level of enamel and dentin margins of each restored resin following conclusion was obtained. 1. In composite resin Filtek Z350XT Universal (3M/ESPE Dental Products, USA) in enamel margin, Easy Bond (3M/ESPE Dental Products) showed the lowest microleakage and this leakage was represented to be high in the order of Single Bond 2 (3M/ESPE Dental Products), Scotchbond Multi-Purpose (3M/ESPE Dental Products) and Cearfil SE Bond (Kuraray Medical Inc., Japan). In case of Filtek Z350XT Flowable (3M/ESPE Dental Products), Scotchbond Multi-Purpose showed the lowest microleakage and this leakage was represented to be high in the order of Single Bond 2, Clearfil SE Bond and Easy Bond. 2. In case of Filtek Z350XT Universal in dentin margin, Easy Bond showed the lowest microleakage and this leakage was represented to be high in the order of Scotchbond Multi-Purpose, Single Bond 2 and Clearfil SE Bond. In case of Filtek Z350XT Flowable, Scotchbond Multi-Purpose and Single Bond showed the lowest microleakage and this leakage was represented to be high in the order of Clearfil SE Bond and Easy Bond. 3. In all the groups excepting S-U group (Single Bond 2+Filtek Z350XT Universal), enamel margin showed more higher microleakage than that of dentin margin. 4. There was a difference between enamel and dentin margin among each group but it was not significant statistically (p＞0.05). When summarizing this result, it is considered that composite resin and dentin adhesive could be applied selectively and particularly in case of applying 1-step self-etching dentin adhesive, this method would be advantageous for manipulation convenience and shortening of operation time.
Abstract
In order to explore microleakage in class V cavity based on different kinds of several dentin adhesive and composite resin, 2 kinds of composite resin was restored and exposed after applying 4 kinds of dentin adhesives. Deposited in methylene blue solution for 4 hours and cut in parallel with tooth longitudinal axis. By observing dye penetration level of enamel and dentin margins of each restored resin following conclusion was obtained. 1. In composite resin Filtek Z350XT Universal (3M/ESPE Dental Products, USA) in enamel margin, Easy Bond (3M/ESPE Dental Products) showed the lowest microleakage and this leakage was represented to be high in the order of Single Bond 2 (3M/ESPE Dental Products), Scotchbond Multi-Purpose (3M/ESPE Dental Products) and Cearfil SE Bond (Kuraray Medical Inc., Japan). In case of Filtek Z350XT Flowable (3M/ESPE Dental Products), Scotchbond Multi-Purpose showed the lowest microleakage and this leakage was represented to be high in the order of Single Bond 2, Clearfil SE Bond and Easy Bond. 2. In case of Filtek Z350XT Universal in dentin margin, Easy Bond showed the lowest microleakage and this leakage was represented to be high in the order of Scotchbond Multi-Purpose, Single Bond 2 and Clearfil SE Bond. In case of Filtek Z350XT Flowable, Scotchbond Multi-Purpose and Single Bond showed the lowest microleakage and this leakage was represented to be high in the order of Clearfil SE Bond and Easy Bond. 3. In all the groups excepting S-U group (Single Bond 2+Filtek Z350XT Universal), enamel margin showed more higher microleakage than that of dentin margin. 4. There was a difference between enamel and dentin margin among each group but it was not significant statistically (p＞0.05). When summarizing this result, it is considered that composite resin and dentin adhesive could be applied selectively and particularly in case of applying 1-step self-etching dentin adhesive, this method would be advantageous for manipulation convenience and shortening of operation time.
참고문헌 (25)
- Koo BW, "The effect of dentin bonding agents on marginal leakage following restoration on the cervical abrasion", J Korean Acad Con Dent, 12, pp.55~63 (1987)
- Brackett WW, "Microleakage of class V compomer and light cured glass ionomer restorations", J Prosthetic Dent, 79, pp.261~263 (1998)
- Cooley RL, "Glass ionomer microleakage in class V restorations", Gen Dent, 36, pp.113~115 (1988)
- McCoy RB, "Clinical success of class V composite resin restorations without mechanical retention", J Am Dent Assoc, 129, pp.593~599 (1998)
- Lee SY:, "An in vivo study of microleakage of composite resins", 석사, pp.2003
- 배상배, "5급 와동에서 저유동성과 고유동성 레진의 변연 미세누출 비교", Restorative Dentistry and Endodontics, 34(6), pp.477~483 (2009), 대한치과보존학회
- Ferdianakis K, "Microleakage reduction from newer esthetic restorative materials in permanent molars", J Clin Pediatr Dent, 22, pp.221~229 (1998)
- Celik C, "Clinical evaluation of flowable resins in non-carious cervical lesions two year results", Oper Dent, 32, pp.313~321 (2007)
- Kim HJ, "Microleakage of flowable resin composite by types of adhesive systems", 석사, pp.2007
- 이경욱, "접착제와 와동형성의 차이에 따른 5급 복합레진 수복의 전향적 임상연구", Restorative Dentistry and Endodontics, 31(4), pp.300~311 (2006), 대한치과보존학회
- Summitt JB, "Fundamentals of operative dentistry. In: A contemporary approach", pp.396~ (2001), Quintessence Pub
- Inoue S, "Microtensile bond strength of eleven contemporary adhesives to dentin", J Adhes Dent, 3, pp.237~245 (2001)
- Inoue S, "Microtensile bond strength of eleven contemporary adhesives to enamel", J Am Dent Assoc, 16, pp.329~334 (2003)
- Piva E, "Dye for caries detection influence on composite and compomer microlea kage", Clin Oral Invest, 6, pp.244~248 (2002)
- Lim YH, "The comparison of microleakage of class V composite resin restorations", 석사, pp.2001
- Smith DC, "Biocompatibility of dental material, In Composition and properties of unfilled and composite resin restorative materials. vol. III", pp.97~130 (1982), CRC Press
- Yazici AR, "The effect of flowable resin composite on microleakage in class V cavities", Oper Dent, 28, pp.42~46 (2003)
- Kang SH, "Microleakage of microfill and flowable composite resins in class V cavity after load cycling", 석사, pp.2003
- Turssi CP, "Wear and fatigue behavior of nano-structured dentin resin composite", J Biomed Mater Res Part B, 78, pp.196~203 (2006)
- Park JE, "The study on the microleakage pattern of flowable composite resin restorations according to the type of adhesive materials", 석사, pp.2007
- Nam KY, "Effects of dentin bonding agents on bonding durability of a flowable composite to dentin", J Dent Master, 26, pp.224~231 (2007)
- Attar N, "Effect of two light-emitting diode (LED) and one halogen curing light on the microleakage of class V flowable composite restorations", J Contemp Dent Prac, 8, pp.80~88 (2007)
- Saunders WP, "Microleakage of bonding agents with wet and dry bonding techniques", J Am Dent, 9, pp.34~36 (1996)
- Van Meerbeek B, "Buonocore memorial lecture Adhesion to enamel and dentin current status and future challenges", Oper Dent, 28, pp.215~235 (2003)
- Jeong JH, "Marginal microleakage of single step adhesives", 석사, pp.2004