Comparison of the Surface Properties and Color Stability of Various Aesthetic Restorative Materials Treated with In-Office Tooth Bleaching

키워드

참고문헌 (48)

1. Kim SH, "The effect of 15%carbamide peroxide on the surface roughness and staining of esthetic restoratives", J Dent Hygiene Sci, 13, pp.165~173 (2013)
2. AlJehani YA, "Current trends in aesthetic dentistry", Health, 6, pp.1941~1949 (2014)[DOI]
3. Bilge K, "Effects of different remineralizing agents on color stability and surface characteristics of the teeth following vital bleaching", Microsc Res Tech, 84, pp.2206~2218 (2021)[DOI]
4. Wahbi MA, "Minimally invasive use of coloured composite resin in aesthetic restoration of periodontially involved teeth : case report", Saudi Dent J, 25, pp.83~89 (2013)[DOI]
5. Faris TM, "In vitro evaluation of dental color stability using various aesthetic restorative materials after immersion in different drinks", BMC Oral Health, 23, pp.49~ (2023)[DOI]
6. Park SY, "The effect of tooth bleaching agent contained 15% carbamide peroxide on the color, microhardness and surface roughness of tooth-colored restorative materials by using pH cycling model", J Dent Hygiene Sci, 13, pp.351~360 (2013)[DOI]
7. Choi JW, "Changes in the physical properties and color stability of aesthetic restorative materials caused by various beverages", Dent Mater J, 38, pp.33~40 (2019)[DOI]
8. Kim NJ, "A study on the fracture strength of 4 kinds of direct composite resins", J Technol Dent, 41, pp.87~92 (2019)[DOI]
9. Choi JW, "Comparison of color stability, gloss, mechanical and physical properties according to dental temporary filling materials type", Korean J Dent Mater, 49, pp.97~110 (2022)[DOI]
10. Al-Dulaijan YA, "Color stability of nanoparticlesmodified dental resin-based composites", Appl Sci, 13, pp.3870~ (2023)[DOI]
11. Al-Zain AO, "Influence of light-curing distances on microflexural strength of two resin-based composites", Oper Dent, 45, pp.297~305 (2020)[DOI]
12. Chisnoiu AM, "Marginal adaptation assessment for two composite layering techniques using dye penetration, afm, sem and ftir : an in-vitro comparative study", Appl Sci, 11, pp.5657~ (2021)[DOI]
13. Comba A, "Vickers hardness and shrinkage stress evaluation of low and high viscosity bulk-fill resin composite", Polymers(Basel), 12, pp.1477~ (2020)[DOI]
14. Noh T, "Comparison of the mechanical properties between bulk-fill and conventional composites", J Korean Acad Pediatr Dent, 43, pp.365~373 (2016)[DOI]
15. Barutcigil Ç, "Color of bulk-fill composite resin restorative materials", J Esthet Restor Dent, 30, pp.E3~E8 (2018)[DOI]
16. Jeong MA, "Antibacterial and mechanical properties of glass ionomer cements containing functionalized multiwall carbon nanotube(MWCNT)", J Korea Cont Assoc, 17, pp.300~306 (2017)[DOI]
17. Di Lauro A, "Fluoride and calcium release from alkasite and glass ionomer restorative dental materials : in vitro study", J Funct Biomater, 14, pp.109~ (2023)[DOI]
18. Nicholson JW, "Maturation processes in glass-ionomer dental cements", Acta Biomater Odontol Scand, 4, pp.63~71 (2018)[DOI]
19. Kang J, "Fluoride release and compressive strength of several giomers", J Korean Acad Pediatr Dent, 43, pp.292~298 (2016)[DOI]
20. Nicholson JW, "Enhancing the mechanical properties of glass-ionomer dental cements: a review", Materials (Basel), 13, pp.2510~ (2020)[DOI]
21. Valanezhad A, "Modification of resin modified glass ionomer cement by addition of bioactive glass nanoparticles", J Mater Sci Mater Med, 27, pp.3~ (2016)[DOI]
22. Kim JH, "Comparison of tooth whitening efficacy between gel and strip with light activator", J Dent Hygiene Sci, 17, pp.481~486 (2017)[DOI]
23. Yang SY, "Effects of incorporating 45S5 bioactive glass into 30% hydrogen peroxide solution on whitening efficacy and enamel surface properties", Clin Oral Investig, 26, pp.5301~5312 (2022)[DOI]
24. Zhao X, "Treatment durations and whitening outcomes of different tooth whitening systems", Medicina (Kaunas), 59, pp.1130~ (2023)[DOI]
25. Goettems ML, "Impact of tooth bleaching on oral health-related quality of life in adults : a triple-blind randomised clinical trial", J Dent, 105, pp.103564~ (2021)[DOI]
26. Parreiras SO, "Effect of an experimental desensitizing agent on reduction of bleachinginduced tooth sensitivity : a triple-blind randomized clinical trial", J Am Dent Assoc, 149, pp.281~290 (2018)[DOI]
27. Klaric Sever E, "Effects of bleaching agent on physical and aesthetic properties of restorative materials", Dent Mater J, 35, pp.788~795 (2016)[DOI]
28. Alaghehmand H, "The effect of office bleaching on the color and bond strength of resin restorations", Dent Res J (Isfahan), 16, pp.47~52 (2019)
29. Zhao X, "Effects of different discoloration challenges and whitening treatments on dental hard tissues and composite resin restorations", J Dent, 89, pp.103182~ (2019)[DOI]
30. Yilmaz MN, "Effects of whitening toothpastes on the esthetic properties and surface roughness of a composite resin", J Oral Sci, 63, pp.320~325 (2021)[DOI]
31. Martini EC, "Bleaching-induced tooth sensitivity with application of a desensitizing gel before and after in-office bleaching : a triple-blind randomized clinical trial", Clin Oral Investig, 24, pp.385~394 (2020)[DOI]
32. Wongpraparatana I, "Effect of vital tooth bleaching on surface roughness and streptococcal biofilm formation on direct toothcolored restorative materials", Oper Dent, 43, pp.51~59 (2018)[DOI]
33. Jang CH, "Color stability of esthetic restorative materials after application of fluoride varnishes", Korean J Dent Mater, 48, pp.147~157 (2021)[DOI]
34. Șaramet V, "Molecular interactions between saliva and dental composites resins: a way forward", Materials (Basel), 14, pp.2537~ (2021)[DOI]
35. Pratap B, "Resin based restorative dental materials : characteristics and future perspectives", Jpn Dent Sci Rev, 55, pp.126~138 (2019)[DOI]
36. Hwang SS, "Evaluation of surface roughness of heat-polymerized denture base resin according to the polishing step", J Tech Dent, 37, pp.205~212 (2015)[DOI]
37. Byun JE, "Evaluation of surface gloss of composite resins", J Korean Acad Dent Adm, 11, pp.38~46 (2023)[DOI]
38. Lai G, "Surface properties and color stability of dental flowable composites influenced by simulated toothbrushing", Dent Mater J, 37, pp.717~724 (2018)[DOI]
39. Malara P, "Contemporary aesthetic restorative dental composite materials", J Achiev Mater Manuf Eng, 78, pp.32~40 (2016)[DOI]
40. Aktas E, "The effects of vital whitening agents on the surface properties of three different restoration materials", Biomed Res, 31, pp.43~47 (2020)
41. Yoon M, "Changes of compressive strength and microhardness of composite resin, giomer and compomer after thermocycling treatment", J Korean Acad Pediatr Dent, 37, pp.438~444 (2010)
42. Bilić-Prcić M, "Effects of incorporation of marine derived hydroxyapatite on the microhardness, surface roughness, and fluoride release of two glass-ionomer cements", Appl Sci, 11, pp.11027~ (2021)[DOI]
43. Malagon IC, "Analysis of the porosity and microhardness of glass ionomer cements", Mater Sci, 28, pp.113~119 (2022)[DOI]
44. Sarembe S, "The impact on dental staining caused by beverages in combination with chlorhexidine digluconate", Eur J Dent, 16, pp.911~918 (2022)[DOI]
45. Alharbi A, "In-office bleaching efficacy on stain removal from CAD", CAM and direct resin composite materials, 2018, pp.30, 51~58
46. Razavi S, "Evaluation of the effects of different mouthrinses on the color stability of one type of glass ionomer, compomer and giomer", J Dent Mater Tech, 5, pp.36~42 (2016)
47. Savas S, "Color stability, roughness, and water sorption", solubility of glass ionomerbased restorative materials, 2019, pp.22, 824~832
48. Kim MC, "Color stability, surface, and physicochemical properties of threedimensional printed denture base resin reinforced with different nanofillers", Sci Rep, 14, pp.1842~ (2024)[DOI]

관련 논문AI추천