본문 바로가기
KERD
논문KCI 등재

Impact of combined at-home bleaching and whitening toothpaste use on the surface and color of a composite resin

Scatolin Renata Siqueira|Vieira-Junior Waldemir Francisco|Ferraz Laura Nobre|Barbosa Carolina Meneghin|Tanaka Marcia Hiromi
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2023.09|Restorative Dentistry and Endodontics|제48권 제3호|pp. 1-12|DOI 10.5395/rde.2023.48.e26

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Composite resinsToothpasteCarbamide peroxide
주제분류치의학

초록

Objective: This in vitro study aimed to evaluate the effects of different whitening toothpastes on a composite resin during at-home bleaching with 10% carbamide peroxide. Materials and Methods: Sixty samples (7 mm × 2 mm) were used for color and roughness analyses, while another 60 samples (3 mm × 2 mm) were utilized to assess microhardness. The factors analyzed included toothpaste, for which 5 options with varying active agents were tested (distilled water; conventional toothpaste; whitening toothpaste with abrasive agents; whitening toothpaste with abrasive and chemical agents; and whitening toothpaste with abrasive, chemical, and bleaching agents). Brushing and application of whitening gel were performed for 14 days. Surface microhardness (SMH), surface roughness (Ra), and color (ΔL*, Δa*, Δb, ΔE*ab, and ΔE00) were analyzed. The Ra and SMH data were analyzed using mixed generalized linear models for repeated measures, while the color results were assessed using the Kruskal-Wallis and Dunn tests. Results: Between the initial and final time points, all groups demonstrated significant increases in Ra and reductions in SMH. No significant differences were found between groups for SMH at the final time point, at which all groups differed from the distilled water group. Conventional toothpaste exhibited the lowest Ra, while whitening toothpaste with abrasive agent had the highest value. No significant differences were observed in ΔL*, Δa*, and Δb. Conclusions: While toothpaste composition did not affect the color stability and microhardness of resin composite, combining toothbrushing with whitening toothpaste and at-home bleaching enhanced the change in Ra.

Abstract

Objective: This in vitro study aimed to evaluate the effects of different whitening toothpastes on a composite resin during at-home bleaching with 10% carbamide peroxide. Materials and Methods: Sixty samples (7 mm × 2 mm) were used for color and roughness analyses, while another 60 samples (3 mm × 2 mm) were utilized to assess microhardness. The factors analyzed included toothpaste, for which 5 options with varying active agents were tested (distilled water; conventional toothpaste; whitening toothpaste with abrasive agents; whitening toothpaste with abrasive and chemical agents; and whitening toothpaste with abrasive, chemical, and bleaching agents). Brushing and application of whitening gel were performed for 14 days. Surface microhardness (SMH), surface roughness (Ra), and color (ΔL*, Δa*, Δb, ΔE*ab, and ΔE00) were analyzed. The Ra and SMH data were analyzed using mixed generalized linear models for repeated measures, while the color results were assessed using the Kruskal-Wallis and Dunn tests. Results: Between the initial and final time points, all groups demonstrated significant increases in Ra and reductions in SMH. No significant differences were found between groups for SMH at the final time point, at which all groups differed from the distilled water group. Conventional toothpaste exhibited the lowest Ra, while whitening toothpaste with abrasive agent had the highest value. No significant differences were observed in ΔL*, Δa*, and Δb. Conclusions: While toothpaste composition did not affect the color stability and microhardness of resin composite, combining toothbrushing with whitening toothpaste and at-home bleaching enhanced the change in Ra.

참고문헌 (46)

  1. de Geus JL, "At-home vs in-office bleaching : a systematic review and meta-analysis", Oper Dent, 41, pp.341~356 (2016)
  2. Eimar H, "Hydrogen peroxide whitens teeth by oxidizing the organic structure", J Dent, 40(Supplement 2), pp.e25~e33 (2012)
  3. Hafez R, "Effect of in-office bleaching on color and surface roughness of composite restoratives", Eur J Dent, 4, pp.118~127 (2010)
  4. Li Y, "Safety controversies in tooth bleaching", Dent Clin North Am, 55, pp.255~263 (2011)
  5. Gouveia TH, "Effect of at-home bleaching with different thickeners and aging on physical properties of a nanocomposite", Eur J Dent, 10, pp.82~91 (2016)
  6. Correia Vieira A, "The effects of over-the-counter bleaching products on the surface of nanofilled composite", Arq Odontol, 56, pp.1120471~ (2020)
  7. Melo CF, "Microhardness and roughness of enamel bleached with 10% carbamide peroxide and brushed with different toothpastes : an in situ study", J Int Oral Health, 6, pp.18~24 (2014)
  8. Worschech CC, "In vitro evaluation of human dental enamel surface roughness bleached with 35% carbamide peroxide and submitted to abrasive dentifrice brushing", Pesqui Odontol Bras, 17, pp.342~348 (2003)
  9. Çakmakçioglu Ö, "Clinical evaluation of whitening effect of whitening toothpastes : a pilot study", Oral Health Dent Manag Black Sea Ctries, 8, pp.6~13 (2009)
  10. Barbieri GM, "Effect of whitening dentifrices on the surface roughness of commercial composites", J Esthet Restor Dent, 23, pp.338~345 (2011)
  11. Soares de Queiroz A, "The influence of toothpaste on the abrasivity of dental structure : a narrative review", Res Soc Dev, 10, pp.e210101421985~ (2021)
  12. Daud A, "Effects of toothbrushing on surface characteristics of microhybrid and nanofilled resin composites following different finishing and polishing procedures", J Dent, 99, pp.103376~ (2020)
  13. Wang L, "Wear resistance of packable resin composites after simulated toothbrushing test", J Esthet Restor Dent, 16, pp.303~314 (2004)
  14. Heintze SD, "Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load", Dent Mater, 26, pp.306~319 (2010)
  15. Turgut S, "Discoloration of provisional restorations after oral rinses", Int J Med Sci, 10, pp.1503~1509 (2013)
  16. Bernardon JK, "Clinical evaluation of different desensitizing agents in home-bleaching gels", J Prosthet Dent, 115, pp.692~696 (2016)
  17. Heintze SD, "Surface roughness of different dental materials before and after simulated toothbrushing in vitro", Oper Dent, 30, pp.617~626 (2005)
  18. Oliveira GU, "Impact of filler size and distribution on roughness and wear of composite resin after simulated toothbrushing", J Appl Oral Sci, 20, pp.510~516 (2012)
  19. Joiner A, "Whitening toothpastes : a review of the literature", J Dent, 38(Supplement 2), pp.e17~e24 (2010)
  20. Joiner A, "A novel optical approach to achieving tooth whitening", J Dent, 36(Supplement 1), pp.S8~S14 (2008)
  21. Khamverdi Z, "Comparison of the effects of two whitening toothpastes on microhardness of the enamel and a microhybride composite resin : an in vitro study", J Dent(Tehran), 7, pp.139~145 (2010)
  22. Nainan MT, "The comparison of the effects of different whitening toothpastes on the micro hardness of a nano hybrid composite resin", J Conserv Dent, 17, pp.550~554 (2014)
  23. Dos Santos JH, "Whitening toothpastes effect on nanoparticle resin composite roughness after a brushing challenge : An in vitro study", J Clin Exp Dent, 11, pp.e334~e339 (2019)
  24. Vieira I, "Effect of at-home bleaching gels with different thickeners on the physical properties of a composite resin without bisphenol A", J Esthet Restor Dent, 34, pp.969~977 (2022)
  25. Schlueter N, "Effect of a chitosan additive to a Sn2+-containing toothpaste on its anti-erosive", anti-abrasive efficacy--a controlled randomised in situ trial, 2014, pp.18, 107~115
  26. Comar LP, "Effect of NaF, SnF2, and TiF4 toothpastes on bovine enamel and dentin erosion-abrasion in vitro", Int J Dent, 2012, pp.134350~ (2012)
  27. Moron BM, "Impact of different fluoride concentrations and pH of dentifrices on tooth erosion", abrasion in vitro, 2013, pp.58, 106~111
  28. Pini NI, "Efficacy of stannous ions on enamel demineralization under normal and hyposalivatory conditions : a controlled randomized in situ pilot trial", Caries Res, 51, pp.543~553 (2017)
  29. Luo MR, "The development of the CIE 2000 colour-difference formula : CIEDE2000", Color Res Appl, 269, pp.340~350 (2001)
  30. Paravina RD, "Color difference thresholds in dentistry", J Esthet Restor Dent, 27(Supplement 1), pp.S1~S9 (2015)
  31. Kwon SR, "Review of the mechanism of tooth whitening", J Esthet Restor Dent, 27, pp.240~257 (2015)
  32. Hannig C, "Effect of bleaching on subsurface micro-hardness of composite and a polyacid modified composite", Dent Mater, 23, pp.198~203 (2007)
  33. Bailey SJ, "Effects of home bleaching products on composite resins", Quintessence Int, 23, pp.489~494 (1992)
  34. Silva Oliveira R, "Ação de dentifrício com peróxido de hidrogênio sobre resina composta nanoparticulada", Rev Cienc Med Biol, 18, pp.372~379 (2019)
  35. Wu W, "Influence of chemicals on wear of dental composites", J Dent Res, 61, pp.1180~1183 (1982)
  36. Ferreira MC, "Effect of toothpastes with different abrasives on eroded human enamel : an in situ", ex vivo study, 2013, pp.7, 132~139
  37. Hilgenberg SP, "Physical-chemical characteristics of whitening toothpaste and evaluation of its effects on enamel roughness", Braz Oral Res, 25, pp.288~294 (2011)
  38. Walsh T, "Fluoride toothpastes of different concentrations for preventing dental caries", Cochrane Database Syst Rev, 3, pp.CD007868~ (2019)
  39. Camargo I, "Evaluation of the precision in the dentifrice abrasivity measurements obtained by a radiotracer method", J Radioanal Nucl Chem, 249, pp.487~489 (2001)
  40. Davis WB, "Measurement in vitro of enamel abrasion by dentifrice", J Dent Res, 55, pp.970~975 (1976)
  41. Gusmão ES, "Aplicabilidade clínica dos dentifrícios", Int J Dent, 2, pp.231~235 (2003)
  42. Khashayar G, "Perceptibility and acceptability thresholds for colour differences in dentistry", J Dent, 42, pp.637~644 (2014)
  43. Alghazali N, "Assessment of perceptibility and acceptability of color difference of denture teeth", J Dent, 40(Supplement 1), pp.e10~e17 (2012)
  44. Um CM, "Staining of resin-based veneering materials with coffee and tea", Quintessence Int, 22, pp.377~386 (1991)
  45. Frazer L, "Titanium dioxide : environmental white knight?", Environ Health Perspect, 109, pp.A174~A177 (2001)
  46. Tostes NE, "Avaliação do desgaste produzido em esmalte por cremes dentais clareadores", Rev Odontol Araçatuba, 30, pp.9~13 (2009)

이 간행물의 다른 논문 (9건)

Radiographic patterns of periosteal bone reactions associated with endodontic lesionsJalali Poorya, Riccobono Jessica, Augsburger Robert A., Tahmasbi Arashlow Mehrnazpp. 1-8Incidence of interappointment emergencies in multiple-visit root canal treatments performed with or without intracanal medicament by undergraduate studentsBaaij Annemarie, Visscher Corine Mirjam, Jansen Manon, Özok Ahmet Rifatpp. 1-11Effect of irrigation protocols on smear layer removal, bond strength and nanoleakage of fiber posts using a self-adhesive resin cementAlessi Rodrigo Stadler, Jitumori Renata Terumi, Bittencourt Bruna Fortes, Gomes Giovana Mongruel, Gomes João Carlospp. 1-13Does photobiomodulation on the root surface decrease the occurrence of root resorption in reimplanted teeth? A systematic review of animal studiesWeissheimer Theodoro, Bischoff Karolina Frick, Michel Carolina Horn Troian, Só Bruna Barcelos, Martins Manoela Domingues, Souza Matheus Albino, da Rosa Ricardo Abreu, Só Marcus Vinícius Reispp. 1-16Tip and taper compatibility of accessory gutta-percha points with rotary and reciprocating instrumentsStreck Júlia Niero Zanatta, Arcaro Sabrina, Ceretta Renan Antônio, Bortoluzzi Eduardo Antunes, Garcia Lucas da Fonseca Roberti, de Almeida Josiane, Kopper Patrícia Maria Poli, Bernardi Anarela Vassenpp. 1-8
원문 보기