Anti-icing Method of Heated Walkway in Ice Class Ships: Efficiency Verification of CNT-based Surface Heating Element Method Through Numerical Analysis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
While melting glaciers due to global warming have facilitated the development of polar routes, Arctic vessels require reliable anti-icing methods to prevent hull icing. Currently, the existing anti-icing method, i.e., the heating coil method, has disadvantages, such as disconnection and power inefficiency. Therefore, a carbon nanotube-based surface heating element method was developed to address these limitations. In this study, the numerical analysis of the surface heating element method was performed using ANSYS. The numerical analysis included conjugate heat transfer and computational fluid dynamics to consider the conduction solids and the effects of wind speed and temperature in cold environments. The numerical analysis method of the surface heating element method was validated by comparing the experimental results of the heating coil method with the numerical analysis results (under the –30 ℃ conditions). The surface heating element method demonstrated significantly higher efficiency, ranging from 56.65–80.17%, depending on the conditions compared to the heating coil method. Moreover, even under extreme environmental conditions (–45 ℃), the surface heating element method satisfied anti-icing requirements. The surface heating element method is more efficient and economical than the heating coil method. However, proper heat flux calculation for environmental conditions is required to prevent excessive design.
Abstract
While melting glaciers due to global warming have facilitated the development of polar routes, Arctic vessels require reliable anti-icing methods to prevent hull icing. Currently, the existing anti-icing method, i.e., the heating coil method, has disadvantages, such as disconnection and power inefficiency. Therefore, a carbon nanotube-based surface heating element method was developed to address these limitations. In this study, the numerical analysis of the surface heating element method was performed using ANSYS. The numerical analysis included conjugate heat transfer and computational fluid dynamics to consider the conduction solids and the effects of wind speed and temperature in cold environments. The numerical analysis method of the surface heating element method was validated by comparing the experimental results of the heating coil method with the numerical analysis results (under the –30 ℃ conditions). The surface heating element method demonstrated significantly higher efficiency, ranging from 56.65–80.17%, depending on the conditions compared to the heating coil method. Moreover, even under extreme environmental conditions (–45 ℃), the surface heating element method satisfied anti-icing requirements. The surface heating element method is more efficient and economical than the heating coil method. However, proper heat flux calculation for environmental conditions is required to prevent excessive design.
참고문헌 (13)
- ANSYS Inc, "ANSYS CFX-Solver theory guide (Release 18.1)", ANSYS Inc, ~ (2017)
- B. P. Technology Transaction., "Surface heating element (center on CNT)" (2017), Interesting Media, Inc
- Det Norske Veritas(DNV)., "DNV rules for classification of ships", DNV, ~ (2005)
- International Maritime Organization(IMO)., "International code of safety for ships operating in polar waters (Polar code). A.1024(26)", ~ (2015)
- 정영준, "빙해선박 아이스 클래스 루버의 해빙(de-icing) 성능평가 및 설계기준에 관한 연구", 대한조선학회 논문집, 52(4), pp.323~329 (2015), 대한조선학회
- 김윤기, "승용차의 제상 및 성에 제거 성능 평가를 위한 수치해석적 연구", 대한기계학회논문집 B, 35(2), pp.161~168 (2011), 대한기계학회
- 이종찬, "빙해선박 상부갑판 열선의 열전달 특성에 따른 착빙방지 성능평가 및 설계기준에 관한연구", 대한조선학회 논문집, 49(6), pp.541~549 (2012), 대한조선학회
- Korea Research Institute of Ships & Ocean Engineering(KRISO)., "Development of Polar Route Safety Operation Technology and Cryogenic Ice Performance Test Evaluation Techniques for Ice Class Ships (TRKO201500009099)", ~ (2013)
- Ministry of Knowledge Economy., "Cold region design specification and winterization. (PNS133C)", ~ (2012)
- Park, W. J., "Evaluation of surface heating element performance installed under the walkway through the numerical analysis", the 2023 Joint Academic Conference of The Korean Association of Ocean Science and Technology Societies (2023)
- Rashid, T., "Review of marine icing and anti-", de-icing systems, 2016, pp.15(2), 79~87
- Vargaftic, N. B., "Handbook Thermophysical Properties of Gases and Liquids" (1972), Nauka Publishing House
- Yu, S. H., "Machined surface texture monitoring using acoustic emission signals in micro milling process", Proceedings of the 10th International Conference of Manufacturing Technology Engineers (ICMTE) (2022)