케이블조립체를 효과적으로 시험할 수 있는 자동 케이블조립체 점검 시스템 시스템 설계 및 구현
Design and Implementation of the Automatic cable assembly test system that can test cable assembly effectively
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we propose the principles and design details of Automatic cable assembly test system and show its utility. Testing the cable assembly is required periodically or non-periodically in the system that the cable assembly performance is quite important like military equipment. There are several weaknesses when humans test the cable assembly manually. It not only takes much time but also could happen human error. To improve these disadvantages, I developed Automatic cable assembly test system. The system can be implemented by building switching control system that connect and disconnect the cable assembly and measuring devices. Through the result of the cable assembly test with this test system, we show this system makes test time short and improves of test reliability as compared with manual test.
Abstract
In this paper, we propose the principles and design details of Automatic cable assembly test system and show its utility. Testing the cable assembly is required periodically or non-periodically in the system that the cable assembly performance is quite important like military equipment. There are several weaknesses when humans test the cable assembly manually. It not only takes much time but also could happen human error. To improve these disadvantages, I developed Automatic cable assembly test system. The system can be implemented by building switching control system that connect and disconnect the cable assembly and measuring devices. Through the result of the cable assembly test with this test system, we show this system makes test time short and improves of test reliability as compared with manual test.
참고문헌 (17)
- 양종원, "입출력 버퍼방식을 이용한 대용량 케이블 점검 시스템 설계 및 구현", 한국군사과학기술학회지, 5(2), pp.103~115 (2002), 한국군사과학기술학회
- Seoung-Hwa Yang, "Study on Productivity Based maintenance Development Process Model considering the Development Security and Quality", pp.2012
- IPC, "IPC-WHMA-A-620B-S, datasheet", ~
- 박용규, "6.6 kV 케이블의 절연저항 측정을 위한 부하전류 및 온도 측정", 전기전자재료학회논문지, 28(1), pp.46~50 (2015), 한국전기전자재료학회[DOI]
- A Study on the Field Application of Live-Line Diagnostic Technique for High Voltage Cable, "Yoon Deok-Ran", Korea Electrical Safety Corporation, ~
- W. K. Kim, "Design and Implementation of the multi-function switching system for Automatic Test Equipment(ATE)", Journal of the Graduate School of Industry Kumoh National Institute of Technology (2012)
- 이석민, "유지보수성과 환경운용성을 개선한 야전시험장비에 대한 연구", 한국컴퓨터정보학회논문지, 23(3), pp.9~16 (2018), 한국컴퓨터정보학회[DOI]
- 김동준, "무기체계 오류 검증을 위한 실시간 시스템 병렬시험 기법", 전자공학회논문지, 53(11), pp.130~138 (2016), 대한전자공학회
- "D2XX_Programmer's_Guide(FT_000071), User guide"[URL]
- Ju-Wan Ryu, "Design Of Ethernet Protocol Gateway for Parallel Interface", Master, pp.2007
- "PA1a-12v, datasheet"[URL]
- 유성열, "PCB 조립 공정의 작업 투입 순서 및 부품함 배치 문제에 관한 연구", 한국산업경영시스템학회지, 29(1), pp.63~71 (2006), 한국산업경영시스템학회
- 권혁진, "신뢰성 향상을 위한 PXIe기반의 휴대용 자동시험장비의 구현", 한국컴퓨터정보학회논문지, 22(7), pp.9~16 (2017), 한국컴퓨터정보학회[DOI]
- 최경진, "사격통제장치 시스템 시험의 신뢰성 향상을 위한 생산시험장비에 관한 연구", 전자공학회논문지, 53(11), pp.139~147 (2016), 대한전자공학회
- 윤영호, "무기체계 양산단계 자동화 시험장비(ATE) SW신뢰성 향상 방안 연구", 전자공학회논문지 - SC, 47(6), pp.19~26 (2010), 대한전자공학회
- 이연호, "중복설계 및 예방정비를 고려한 수리가능 k-out-of-n 시스템 신뢰도 최적화 전략", 대한산업공학회지, 40(1), pp.118~127 (2014), 대한산업공학회[DOI]