구아검 첨가가 3D 프린팅을 위한 수리미 혼합물의 특성에 미치는 영향
Effects of Guar Gum Addition on Optimal Properties of Fish Surimi Mixture for 3D Printing
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated surimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a* (redness) and b* decreased in a contentdependent manner, and L* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were absent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.
Abstract
Guar gum is an edible starch extracted from Cyamopsis tetragonolobus and used as an auxiliary ingredient to enhance the viscosity and adhesiveness of food and improve its emulsification stability. Here, characteristics of fish surimi mixture with various added amounts (0, 0.23, 0.45, 0.67, and 0.89 wt%) of guar gum were analyzed. In unheated surimi with guar gum, the pH decreased as the content increased. In the color values analysis, only the b* (yellowness) increased depending on the amount of added guar gum. The firmness increased with increasing guar gum content, and no significant difference in adhesiveness was observed. In heated surimi, a* (redness) and b* decreased in a contentdependent manner, and L* (lightness) was higher than that of unheated surimi. Regarding physical properties, the highest values of hardness, gumminess, and chewiness were observed in the heated surimi with 0.67 wt% of guar gum. However, no significant change was observed in springiness and cohesiveness. Results of sensory evaluation indicated that with higher guar gum content, only the hardness increased slightly, and significant differences were absent in the remaining parameters. Thus, surimi with 0.67 wt% of guar gum is considered to be optimal for 3D printing.
참고문헌 (33)
- 안병수, "냉동수리미의 등급에 따른 품질특성", 한국수산과학회지, 52(6), pp.555~561 (2019), 한국수산과학회[DOI]
- Mahmood Akhtar, "Emulsion stabilizing properties of depolymerized pectin", Food Hydrocolloids, 16(3), pp.249~256 (2002), Elsevier BV[DOI]
- 최종덕, "전갱이의 알칼리 수리미 겔 제조를 위한 전분 및 비근육 단백질의 최적화", 한국식품영양과학회지, 32(7), pp.1032~1038 (2003), 한국식품영양과학회
- 최영준, "산 및 알칼리 공정으로 조제한 수리미 가열 겔의 물성 특성", 한국수산과학회지, 35(4), pp.309~314 (2002), 한국수산과학회
- Cristina M. Rosell, "Rheology of different hydrocolloids–rice starch blends. Effect of successive heating–cooling cycles", Carbohydrate Polymers, 84(1), pp.373~382 (2011), Elsevier BV[DOI]
- Fernanda C. Godoi, "3d printing technologies applied for food design: Status and prospects", Journal of Food Engineering, 179, pp.44~54 (2016), Elsevier BV[DOI]
- Manuel Gómez, "Functionality of different hydrocolloids on the quality and shelf-life of yellow layer cakes", Food Hydrocolloids, 21(2), pp.167~173 (2007), Elsevier BV[DOI]
- 한현수, "카라기난 첨가 수리미 혼합물의 냉장 저장 중 특성 변화", 한국수산과학회지, 55(5), pp.655~661 (2022), 한국수산과학회[DOI]
- Chang He, "3D printing of food: pretreatment and post-treatment of materials", Critical Reviews in Food Science and Nutrition, 60(14), pp.2379~2392 (2019), Informa UK Limited[DOI]
- Abhishek Indurkar, "Optimization of guar gum-gelatin bioink for 3D printing of mammalian cells", Bioprinting, 20, pp.e00101~ (2020), Elsevier BV[DOI]
- 강유석, "수리미 혼합물 제조 시 우유 첨가에 따른 3D 프린팅 적합성에 미치는 영향", 생명과학회지, 33(5), pp.391~396 (2023), 한국생명과학회[DOI]
- 김한호, "3D 프린팅을 위한 수리미 제조 시 다당류 알긴산 첨가에 따른 물성 변화", 한국수산과학회지, 54(2), pp.145~151 (2021), 한국수산과학회[DOI]
- Kim JK, "Sea Food Processing Engineer", pp.127~195 (2011), Hyoil
- Lee NG, "Optimum rheological mixed ratio of jumbo squid and Alaska pollock surimi for gel product process", Korean J Fish Aquat Sci, 32, pp.718~724 (1999)
- Myeong Gi Lee, "Combined effect of pH and heating conditions on the physical properties of Alaska pollock surimi gels", Journal of Texture Studies, 48(3), pp.215~220 (2016), Wiley[DOI]
- Xueqing Li, "Extrusion-based 3D printing of high internal phase emulsions stabilized by co-assembled β-cyclodextrin and chitosan", Food Hydrocolloids, 134, pp.108036~ (2023), Elsevier BV[DOI]
- Martina Lille, "Applicability of protein and fiber-rich food materials in extrusion-based 3D printing", Journal of Food Engineering, 220, pp.20~27 (2018), Elsevier BV[DOI]
- Deepak Mudgil, "Composition, properties and health benefits of indigestible carbohydrate polymers as dietary fiber: A review", International Journal of Biological Macromolecules, 61, pp.1~6 (2013), Elsevier BV[DOI]
- Na HS, "Abstr KOFFST Int Con 297", ~ (2023)
- N. Nachal, "Applications of 3D Printing in Food Processing", Food Engineering Reviews, 11(3), pp.123~141 (2019), Springer Science and Business Media LLC[DOI]
- Park JW, "Surimi and Surimi Seafood", pp.23~58 (2000)
- 박주동, "산과 알칼리 pH에서 어육 단백질의 용해를 이용한 수리미 제조", 한국식품영양과학회지, 32(3), pp.400~405 (2003), 한국식품영양과학회
- 박주동, "냉동 백조기의 알칼리 수리미 겔 제조를 위한 전분 및 비근육 단백질의 최적화", 한국식품영양과학회지, 32(7), pp.1026~1031 (2003), 한국식품영양과학회
- 박예린, "김(Pyropia yezoensis) 물 추출 천연 색소의 첨가에 의한 수리미 혼합물의 특성 변화", 한국수산과학회지, 55(6), pp.802~807 (2022), 한국수산과학회[DOI]
- Bianca Pérez, "Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: A review", Food Chemistry, 287, pp.249~257 (2019), Elsevier BV[DOI]
- Liewei Qiu, "Scanning electron microscopy analysis of guar gum in the dissolution, gelation and gel-breaking process", Polymer Testing, 68, pp.95~99 (2018), Elsevier BV[DOI]
- 서훈서, "감자 전분의 첨가가 수리미 혼합물 제조에서 3D 프린팅 적합성에 미치는 영향", Journal of Applied Biological Chemistry, 64(4), pp.413~419 (2021), 한국응용생명화학회[DOI]
- N. Shahrubudin, "An Overview on 3D Printing Technology: Technological, Materials, and Applications", Procedia Manufacturing, 35, pp.1286~1296 (2019), Elsevier BV[DOI]
- Ji‐Young Song, "Pasting Properties of Non‐waxy Rice Starch‐Hydrocolloid Mixtures", Starch - Stärke, 58(5), pp.223~230 (2006), Wiley[DOI]
- 송가영, "구아검 및 바질검 첨가 Gluten-free 생면의 제조 및 품질 특성 비교", Culinary Science & Hospitality Research, 23(4), pp.116~124 (2017), (사)한국조리학회[DOI]
- Suh SB, "Processing, quality stability and utilization of approved sardine surimi for surimi-based products", J Kor Soc Food Sci Nutr, 28, pp.403~408 (1999)
- Yoon HS, "3D printing technology and its applications in the future food industry : A review", Food Sci Indust, 49, pp.64~69 (2016)[DOI]
- Jie Yu, "Improving freeze-thaw stability and 3D printing performance of soy protein isolate emulsion gel inks by guar & xanthan gums", Food Hydrocolloids, 136, pp.108293~ (2023), Elsevier BV[DOI]