쌀보리 전분의 첨가가 수리미 혼합물의 3D 프린팅 적합성에 미치는 영향
Effects of Naked Barley Starch on Properties of Fish Surimi Mixture for 3D Printing
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study investigated the effects of various naked barley starch contents (0, 0.67, 1.34, 2.0, and 2.67 wt%) in surimi mixtures for 3D printing. Adding starch to surimi altered its texture, potentially reducing production costs. Unheated surimi became less firm with higher starch content. After heating, there was an increase in hardness, adhesiveness, springiness, cohesiveness, gumminess, chewiness, and resilience, peaking at 1.34 wt% starch. Compared to the negative control, starch-added heated surimi had a tougher texture. The color values (L*, a*, and b*) decreased after heating, with no significant change in shearing force with increasing starch content. Sensory evaluation indicated improved smell, texture, hardness, elasticity, and preference over the negative control. Higher starch content increased hardness for 3D printing suitability with no significant difference above 1.34 wt% starch indicating this is the most appropriate content. Naked barley starch enhanced surimi strength without affecting smell and preference, suggesting it as a potential surimi additive.
Abstract
This study investigated the effects of various naked barley starch contents (0, 0.67, 1.34, 2.0, and 2.67 wt%) in surimi mixtures for 3D printing. Adding starch to surimi altered its texture, potentially reducing production costs. Unheated surimi became less firm with higher starch content. After heating, there was an increase in hardness, adhesiveness, springiness, cohesiveness, gumminess, chewiness, and resilience, peaking at 1.34 wt% starch. Compared to the negative control, starch-added heated surimi had a tougher texture. The color values (L*, a*, and b*) decreased after heating, with no significant change in shearing force with increasing starch content. Sensory evaluation indicated improved smell, texture, hardness, elasticity, and preference over the negative control. Higher starch content increased hardness for 3D printing suitability with no significant difference above 1.34 wt% starch indicating this is the most appropriate content. Naked barley starch enhanced surimi strength without affecting smell and preference, suggesting it as a potential surimi additive.
참고문헌 (20)
- Baek CW, "Quality evaluation of pan bread supplemented with immature chalssalbori powder", J Korean Soc Food Sci Nutr, 50, pp.1108~1116 (2021)[DOI]
- Cheigh HS, "Rheological and milling characteristics of naked and covered barley variesties", Korean J Food Sci Technol, 7, pp.85~90 (1975)
- Jeong YS, "Studies on physico-chemical charac-terization of starch extracted from domestic barley cultivars", Food Eng Prog, 17, pp.203~211 (2013)[DOI]
- Jun HI, "Physicochemical properties and cooking quality of naked waxy barley(Saechalssal bori)", Korean J Food Preserv, 18, pp.165~170 (2011)[DOI]
- Kim CT, "Food 3D-printing technology and its application in the food industry", Food Eng Prog, 21, pp.12~21 (2017)[DOI]
- Kim HG, "Lipid class and fatty acid composition of starch-lipid in naked barley", Korean J Food Sci Technol, 21, pp.515~520 (1989)
- Kim HH, "Change of physical property of alaska pollack Gadus chalcogrammus surimi with addition of polysaccharide alginic acid for applying to 3D printing", Korean J Fish Aquat Sci, 54, pp.145~151 (2021)[DOI]
- Kim JM, "Effect of starch of textural properties of surimi gel", J Food Sci, 52, pp.722~725 (1987)[DOI]
- Kwon OH, "Optimization of coffee replacement beverage prepared with roasted small black bean, barley and brown rice using RSM", M.S., pp.2015
- Lille M, "Applicability of protein and fiber-rich food materials in extrusion-based 3D printing", J Food Eng, 220, pp.20~27 (2018)[DOI]
- Nachal N, "Applications of 3D printing in food processing", Food Eng Rev, 11, pp.123~141 (2019)[DOI]
- Park JD, "Optimum formulation of starch and non-muscle protein for alkali surimi gel from frozen white croaker", J Korean Soc Food Sci Nutr, 32, pp.1026~1031 (2003)[DOI]
- Park JW, "Surimi and Surimi Seafood", pp.23~58 (2000), Marcel Dekker Inc
- Seo HS, "Effect of potato starch on suitability for 3D printing in golden threadfin bream(Nemipterus virgatus)surimi mixture preparation", Appl Biol Chem, 64, pp.413~419 (2021)[DOI]
- Shahrubudin N, "An overview on 3D printing technology : Technological, materials, and applications", Procedia Manuf, 35, pp.1286~1296 (2019)[DOI]
- Song E, "Physicochemical properties of naked barley starches", J Korean Agric Chem Soc, 34, pp.94~101 (1991)
- Yang H, "Effects of starch properties and thermal processing conditions on surimi-starch gels", Food Sci Technol, 31, pp.344~353 (1998)[DOI]
- Yasui T, "Changes in shear modulus, ultrastructure and spin-spin relaxation times of water associated with heat-induced gelation of myosin", J Food Sci, 44, pp.1201~1204 (1979)[DOI]
- You BJ, "Effects of subsidiary ingredients on the texture of steamed salmon kamaboko", J East Coast Res, 6, pp.1~16 (1996)
- Yun YJ, "Hydration rates and changes of hardness during soaking of polished naked barleys", J Korean Agric Chem Soc, 31, pp.21~25 (1988)