Inhibitory effect on Streptococcus mutans and mechanical properties of the chitosan containing composite resin
1
조회
0
다운로드
4
인용
0
참고문헌
초록
Objectives: This study evaluated the antibacterial effect and mechanical properties of composite resins (LCR, MCR, HCR) incorporating chitosan with three different molecular weights (L, Low; M, Medium; H, High). Materials and Methods: Streptococcus (S). mutans 100 mL and each chitosan powder were inoculated in sterilized 10 mL Brain-Heart Infusion (BHI) solution, and was centrifuged for 12 hr. Absorbance of the supernatent was measured at OD660 to estimate the antibacterial activities of chitosan. After S. mutans was inoculated in the disc shaped chitosan-containing composite resins, the disc was cleansed with BHI and diluted with serial dilution method. S. mutans was spread on Mitis-salivarius bacitracin agar. After then, colony forming unit (CFU) was measured to verify the inhibitory effect on S. mutans biofilm. To ascertain the effect on the mechanical properties of composite resin, 3-point bending and Vickers hardness tests were done after 1 and 3 wk water storage, respectively. Using 2-way analysis of variance (ANOVA) and Scheffe test, statistical analysis was done with 95% significance level. Results: All chitosan powder showed inhibition effect against S. mutans. CFU number in chitosan-containing composite resins was smaller than that of control resin without chitosan. The chitosan containing composite resins did not show any significant difference in flexural strength and Vickers hardness in comparison with the control resin. However, the composite resin, MCR showed a slightly decreased flexural strength and the maximum load than those of control and the other composite resins HCR and LCR. Conclusions: LCR and HCR would be recommended as a feasible antibacterial restorative due to its antibacterial nature and mechanical properties. (Restor Dent Endod 2013;38(1):36-42)
Abstract
Objectives: This study evaluated the antibacterial effect and mechanical properties of composite resins (LCR, MCR, HCR) incorporating chitosan with three different molecular weights (L, Low; M, Medium; H, High). Materials and Methods: Streptococcus (S). mutans 100 mL and each chitosan powder were inoculated in sterilized 10 mL Brain-Heart Infusion (BHI) solution, and was centrifuged for 12 hr. Absorbance of the supernatent was measured at OD660 to estimate the antibacterial activities of chitosan. After S. mutans was inoculated in the disc shaped chitosan-containing composite resins, the disc was cleansed with BHI and diluted with serial dilution method. S. mutans was spread on Mitis-salivarius bacitracin agar. After then, colony forming unit (CFU) was measured to verify the inhibitory effect on S. mutans biofilm. To ascertain the effect on the mechanical properties of composite resin, 3-point bending and Vickers hardness tests were done after 1 and 3 wk water storage, respectively. Using 2-way analysis of variance (ANOVA) and Scheffe test, statistical analysis was done with 95% significance level. Results: All chitosan powder showed inhibition effect against S. mutans. CFU number in chitosan-containing composite resins was smaller than that of control resin without chitosan. The chitosan containing composite resins did not show any significant difference in flexural strength and Vickers hardness in comparison with the control resin. However, the composite resin, MCR showed a slightly decreased flexural strength and the maximum load than those of control and the other composite resins HCR and LCR. Conclusions: LCR and HCR would be recommended as a feasible antibacterial restorative due to its antibacterial nature and mechanical properties. (Restor Dent Endod 2013;38(1):36-42)
참고문헌 (32)
- Kato K, "Density profiles of total bacteria and S. mutans within dental plaque treated with stannous fluoride gel", International Congress Series, 1284, pp.185~186 (2005)
- Imazato S, "Antibacterial properties of resin composites and dentin bonding systems", Dent Mater, 19, pp.449~457 (2003)
- Addy M, "In vitro studies into the release of chlorhexidine acetate, prednisolone sodium phosphate, and prednisolone alcohol from cold cure denture base acrylic", J Biomed Mater Res, 16, pp.145~157 (1982)
- Wilson SJ, "The release of chlorhexidine from modified dental acrylic resin", J Oral Rehabil, 20, pp.311~319 (1993)
- Jedrychowski JR, "Antibacterial and mechanical properties of restorative materials combined with chlorhexidines", J Oral Rehabil, 10, pp.373~381 (1983)
- Imazato S, "Antibacterial activity of MDPB polymer incorporated in dental resin", J Dent, 23, pp.177~181 (1995)
- Uragami T, "Dehydration from alcohols by polyion complex cross-linked chitosan composite membranes during evapomeation", Biomacromolecules, 4, pp.137~144 (2003)
- Ikinci G, "Effect of chitosan on a periodontal pathogen Porphyromonas gingivalis", Int J Pharm, 235, pp.121~127 (2002)
- Chung YC, "Effect of abiotic factors on the antibacterial activity of chitosan against waterborne pathogens", Bioresour Technol, 88, pp.179~184 (2003)
- Helander IM, "Chitosan disrupts the barrier properties of the outer membranes of gram-negative bacteria", Int J Food Microbiol, 71, pp.235~244 (2001)
- Rabea EI, "Chitosan as antimicrobial agent: applications and mode of action", Biomacromolecules, 4, pp.1457~1465 (2003)
- Chung YC, "Relationship between antibacterial activity of chitosan and surface characteristics of cell wall", Acta Pharmacol Sin, 25, pp.932~936 (2004)
- Decker EM, "A synergistic chlorhexidine", chitosan combination for improved antiplaque strategies, 2005, pp.40, 373~377
- Choi BK, "In vitro antimicrobial activity of a chitooligosaccharide mixture against Actinobacillus actinomycetemcomitans and Streptococcus mutans", Int J Antimicrob Agents, 18, pp.553~557 (2001)
- Fujiwara M, "Inhibitory effect of water-soluble chitosan on growth of Streptococcus mutans", New Microbiol, 27, pp.83~86 (2004)
- Tarsi R, "Inhibition of Streptococcus mutans adsorption to hydroxyapatite by low-molecular-weight chitosans", J Dent Res, 76, pp.665~672 (1997)
- Tarsi R, "Effect of low-molecular-weight chitosans on the adhesive properties of oral streptococci", Oral Microbiol Immunol, 13, pp.217~224 (1998)
- Miyazaki S, "Chitosan and sodium alginate based bioadhesive tablets for intraoral drug delivery", Biol Pharm Bull, 17, pp.745~747 (1994)
- Hernández-Lauzardo AN, "Antifungal effects of chitosan with different molecular weights on in vitro development of Rhizopus stolonifer (Ehrenb.:Fr.) Vuill", Carbohydrate Polymers, 73, pp.541~547 (2008)
- Madihally SV, "Porous chitosan scaffolds for tissue engineering", Biomaterials, 20, pp.1133~1142 (1999)
- Bae K, "Effect of watersoluble reduced chitosan on Streptococcus mutans, plaque regrowth and biofilm vitality", Clin Oral Investig, 10, pp.102~107 (2006)
- Kaş HS, "Chitosan: properties, preparations and application to microparticulate systems", J Microencapsul, 14, pp.689~711 (1997)
- Sano H, "Inhibition of adsorption of oral streptococci to saliva treated hydroxyapatite by chitin derivatives", Bull Tokyo Dent Coll, 32, pp.9~17 (1991)
- Tanzer JM, "Microbiology of dental caries, In Contemporary oral microbiology and immunology", pp.377~424 (1992), Mosby
- Slotz J, "Attachment of Bacteroides melaninogenicus subsp. asaccharolyticus to oral surfaces and its possible role in colonization of the mouth and of periodontal pockets", Infect Immun, 19, pp.254~264 (1978)
- Wise MD, "The plaque-retaining capacity of four dental materials", J Prosthet Dent, 33, pp.178~190 (1975)
- Frank RM, "Transmission electron microscopy of plaque accumulations in denture stomatitis", J Prosthet Dent, 53, pp.115~124 (1985)
- Skjörland KK, "Plaque accumulation on different dental filling materials", Scand J Dent Res, 81, pp.538~542 (1973)
- Skjørland KK, "Effect of sucrose rinses on bacterial colonization on amalgam and composite", Acta Odontol Scand, 40, pp.193~196 (1982)
- Sano H, "Effect of chitosan rinsing on reduction of dental plaque formation", Bull Tokyo Dent Coll, 44, pp.9~16 (2003)
- Chen YM, "Antibacterial properties of chitosan in waterborne pathogen", J Environ Sci Health A Tox Hazard Subst Environ Eng, 37, pp.1379~1390 (2002)
- Busscher HJ, "Influence of a chitosan on oral bacterial adhesion and growth in vitro", Eur J Oral Sci, 116, pp.493~495 (2008)