A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I : Proposal of a heat source model
2
조회
0
다운로드
11
인용
0
참고문헌
키워드
초록
The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power CO2 laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.
Abstract
The use of I-Core sandwich panel has increased in cruise ship deck structure since it can provide similar bending strength with conventional stiffened plate while keeping lighter weight and lower web height. However, due to its thin plate thickness, i.e. about 4~6 mm at most, it is assembled by high power CO2 laser welding to minimize the welding deformation. This research proposes a volumetric heat source model for T-joint of the I-Core sandwich panel and a method to use shell element model for a thermal elasto-plastic analysis to predict welding deformation. This paper, Part I, focuses on the heat source model. A circular cone type heat source model is newly suggested in heat transfer analysis to realize similar melting zone with that observed in experiment. An additional suggestion is made to consider negative defocus, which is commonly applied in T-joint laser welding since it can provide deeper penetration than zero defocus. The proposed heat source is also verified through 3D thermal elasto-plastic analysis to compare welding deformation with experimental results. A parametric study for different welding speeds, defocus values, and welding powers is performed to investigate the effect on the melting zone and welding deformation. In Part II, focuses on the proposed method to employ shell element model to predict welding deformation in thermal elasto-plastic analysis instead of solid element model.
참고문헌 (11)
- Arata, Y., "Dynamic behavior of laser welding and cutting", Proceedings of the Seventh International Conference on Electron and Ion Beam Science and Technology. Washington, DC, pp.111~128 (1976)
- Bardin, F., "Optical techniques for real-time penetration monitoring for laser welding", Applied Optics, 44(19), pp.3869~3876 (2005)
- Cho, J.H., "Implementation of real-time multiple reflection and Fresnel absorption of laser beam in keyhole", Journal of Physics D : Applied Physics, 39(24), pp.5372~5378 (2006)
- Ha, Y. S., "An improved inherent strain analysis for plate bending by line heating considering phase transformation of steel", 박사, pp.2006
- Jin, X., "A study on Fresnel absorption and reflections in the keyhole in deep penetration laser welding", Journal of Physics D : Applied Physics, 35(18), pp.2304~2310 (2002)
- 이재영, "레이저 키홀 용접의 열원 모델링 : Part 1 - 비드 용접", 대한용접접합학회지, 23(1), pp.48~54 (2005), 대한용접접합학회
- Mazumder, J., "Heat transfer model for CW laser material processing", Journal of Applied Physics, 51(2), pp.941~947 (1980)
- Pablo, S., "A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials", Journal of Physics D : Applied Physics, 30(23), pp.3216~3222 (1997)
- Rosental, D., "Mathematical theory of heat distribution during welding and cutting", Welding Journal, 20(5), pp.220~234 (1941)
- Swift-Hook, D.T., "Penetration welding with lasers-Analytical study indicates that present laser beam welding capabilities may be extended tenfold", Welding Journal, 52(11), pp.492~499 (1973)
- Zacharia, T., "Weld pool development during GTA and laser beam welding of Type 304 stainless steel; Part 1-theoretical analysis", Welding Journal, 68(12), pp.499~509 (1989)