Three-dimensional finite element analysis of unilateral mastication in malocclusion cases using cone-beam computed tomography and a motion capture system
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: Stress distribution and mandible distortion during lateral movements are known to be closely linked to bruxism, dental implant placement, and temporomandibular joint disorder. The present study was performed to determine stress distribution and distortion patterns of the mandible during lateral movements in Class I, II, and III relationships. Methods: Five Korean volunteers (one normal, two Class II, and two Class III occlusion cases) were selected. Finite element (FE) modeling was performed using information from cone-beam computed tomographic (CBCT) scans of the subjects’ skulls, scanned images of dental casts, and incisor movement captured by an optical motion-capture system. Results: In the Class I and II cases, maximum stress load occurred at the condyle of the balancing side, but, in the Class III cases, the maximum stress was loaded on the condyle of the working side. Maximum distortion was observed on the menton at the midline in every case, regardless of loading force. The distortion was greatest in Class III cases and smallest in Class II cases. Conclusions: The stress distribution along and accompanying distortion of a mandible seems to be affected by the anteroposterior position of the mandible. Additionally, 3-D modeling of the craniofacial skeleton using CBCT and an optical laser scanner and reproduction of mandibular movement by way of the optical motion-capture technique used in this study are reliable techniques for investigating the masticatory system.
Abstract
Purpose: Stress distribution and mandible distortion during lateral movements are known to be closely linked to bruxism, dental implant placement, and temporomandibular joint disorder. The present study was performed to determine stress distribution and distortion patterns of the mandible during lateral movements in Class I, II, and III relationships. Methods: Five Korean volunteers (one normal, two Class II, and two Class III occlusion cases) were selected. Finite element (FE) modeling was performed using information from cone-beam computed tomographic (CBCT) scans of the subjects’ skulls, scanned images of dental casts, and incisor movement captured by an optical motion-capture system. Results: In the Class I and II cases, maximum stress load occurred at the condyle of the balancing side, but, in the Class III cases, the maximum stress was loaded on the condyle of the working side. Maximum distortion was observed on the menton at the midline in every case, regardless of loading force. The distortion was greatest in Class III cases and smallest in Class II cases. Conclusions: The stress distribution along and accompanying distortion of a mandible seems to be affected by the anteroposterior position of the mandible. Additionally, 3-D modeling of the craniofacial skeleton using CBCT and an optical laser scanner and reproduction of mandibular movement by way of the optical motion-capture technique used in this study are reliable techniques for investigating the masticatory system.
참고문헌 (20)
- Commisso MS, "A study of the temporomandibular joint during bruxism", Int J Oral Sci, 6, pp.116~123 (2014)
- Conti PC, "Orofacial pain: basic mechanisms and implication for successful management", J Appl Oral Sci, 11, pp.1~7 (2003)
- Koyano K, "Occlusion on oral implants: current clinical guidelines", J Oral Rehabil, 42, pp.153~161 (2015)
- Choi AH, "Biomechanics and functional distortion of the human mandible", J Investig Clin Dent, 6, pp.241~251 (2015)
- Park JT, "Realization of masticatory movement by 3-dimensional simulation of the temporomandibular joint and the masticatory muscles", J Craniofac Surg, 24, pp.e347~e351 (2013)
- Akita K, "Positional relationships between the masticatory muscles and their innervating nerves with special reference to the lateral pterygoid and the midmedial and discotemporal muscle bundles of temporalis", J Anat, 197, pp.291~302 (2000)
- de Abreu RA, "Masticatory efficiency and bite force in individuals with normal occlusion", Arch Oral Biol, 59, pp.1065~1074 (2014)
- Davies JC, "Lateral pterygoid muscle: a three-dimensional analysis of neuromuscular partitioning", Clin Anat, 25, pp.576~583 (2012)
- Commisso MS, "Finite element analysis of the human mastication cycle", J Mech Behav Biomed Mater, 41, pp.23~35 (2015)
- Yamaguchi S, "Quantitative analysis of masticatory activity during unilateral mastication using muscle fMRI", Oral Dis, 17, pp.407~413 (2011)
- Koolstra JH, "Consequences of viscoelastic behavior in the human temporomandibular joint disc", J Dent Res, 86, pp.1198~1202 (2007)
- Throckmorton GS, "Biomechanics of differences in lower facial height", Am J Orthod, 77, pp.410~420 (1980)
- Ogami S, "The effectiveness of a mouth guard to protect against strong occlusion caused by modified electroconvulsive therapy", Dent Traumatol, 30, pp.368~373 (2014)
- Murray GM, "Electromyographic activity of the human lateral pterygoid muscle during contralateral and protrusive jaw movements", Arch Oral Biol, 44, pp.269~285 (1999)
- Yamaguchi S, "Overall activity of all masticatory muscles during lateral excursion", J Dent Res, 85, pp.69~73 (2006)
- Sessle BJ, "Jaw movement-related activity and reflexly induced changes in the lateral pterygoid muscle of the monkey Macaca fascicularis", Arch Oral Biol, 27, pp.167~173 (1982)
- Wood WW, "A review of masticatory muscle function", J Prosthet Dent, 57, pp.222~232 (1987)
- Agur AM, "Documentation and three-dimensional modelling of human soleus muscle architecture", Clin Anat, 16, pp.285~293 (2003)
- Lemos RR, "A framework for structured modeling of skeletal muscle", Comput Methods Biomech Biomed Engin, 7, pp.305~317 (2004)
- Röhrle O, "Using a motion-capture system to record dynamic articulation for application in CAD", CAM software, 2009, pp.18, 703~710