Localization of mandibular canal and assessment of the remaining alveolar bone in posterior segment of the mandible with single missing tooth using cone-beam computed tomography: a cross sectional comparative study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: Localization of the mandibular canal (MC) and measurement of the height and width of the available alveolar bone at the proposed implant site in the posterior segment of the mandible using cone-beam computed tomography (CBCT) in patients with a single missing tooth. Materials and Methods: A cross-sectional study was performed where CBCT scans of the patients with a single missing tooth in the posterior segment of the mandible—premolar, I (1st) molar, and II (2nd) molar were used. The scans were assessed using OnDemand3D software (version 1.0; CyberMed Inc., Seoul, Korea) for localization of the MC asnd remaining alveolar bone both vertically (from the superior position of the MC to the crest of the alveolar ridge) and horizontally (buccolingual, 3 mm below the crest of the alveolar ridge). The findings were statistically analyzed using independent t-test. Results: A total of 120 mandibular sites (40 sites for each of the three missing premolar, I molar, and II molar) from 91 CBCT scans were analyzed. The average heights (from the alveolar crest to the superior margin of the MC) at the premolar, I molar, and II molar areas were 15.19±2.12 mm, 14.53±2.34 mm, and 14.21±2.23 mm, respectively. The average widths, measured 3 mm below the crest of the alveolar ridge, at the premolar, I molar, and II molar areas were 6.22±1.96 mm, 6.51±1.75 mm, and 7.60±2.08 mm, respectively. There was no statistically significant difference between males and females regarding the vertical and horizontal measurements of the alveolar ridges. Conclusion: In the study, the measurements were averaged separately for each of the single missing teeth (premolar, I molar, or II molar), giving more accurate information for dental implant placement.
Abstract
Objectives: Localization of the mandibular canal (MC) and measurement of the height and width of the available alveolar bone at the proposed implant site in the posterior segment of the mandible using cone-beam computed tomography (CBCT) in patients with a single missing tooth. Materials and Methods: A cross-sectional study was performed where CBCT scans of the patients with a single missing tooth in the posterior segment of the mandible—premolar, I (1st) molar, and II (2nd) molar were used. The scans were assessed using OnDemand3D software (version 1.0; CyberMed Inc., Seoul, Korea) for localization of the MC asnd remaining alveolar bone both vertically (from the superior position of the MC to the crest of the alveolar ridge) and horizontally (buccolingual, 3 mm below the crest of the alveolar ridge). The findings were statistically analyzed using independent t-test. Results: A total of 120 mandibular sites (40 sites for each of the three missing premolar, I molar, and II molar) from 91 CBCT scans were analyzed. The average heights (from the alveolar crest to the superior margin of the MC) at the premolar, I molar, and II molar areas were 15.19±2.12 mm, 14.53±2.34 mm, and 14.21±2.23 mm, respectively. The average widths, measured 3 mm below the crest of the alveolar ridge, at the premolar, I molar, and II molar areas were 6.22±1.96 mm, 6.51±1.75 mm, and 7.60±2.08 mm, respectively. There was no statistically significant difference between males and females regarding the vertical and horizontal measurements of the alveolar ridges. Conclusion: In the study, the measurements were averaged separately for each of the single missing teeth (premolar, I molar, or II molar), giving more accurate information for dental implant placement.
참고문헌 (26)
- Khalifa N, "Factors associated with tooth loss and prosthodontic status among Sudanese adults", J Oral Sci, 54, pp.303~312 (2012)
- Cahen PM, "A survey of the reasons for dental extractions in France", J Dent Res, 64, pp.1087~1093 (1985)
- Chauncey HH, "The effect of the loss of teeth on diet and nutrition", Int Dent J, 34, pp.98~104 (1984)
- Sullivan RM, "Implant dentistry and the concept of osseointegration:a historical perspective", J Calif Dent Assoc, 29, pp.737~745 (2001)
- Araújo MG, "Dimensional ridge alterations following tooth extraction. An experimental study in the dog", J Clin Periodontol, 32, pp.212~218 (2005)
- Eufinger H, "The role of alveolar ridge width in dental implantology", Clin Oral Investig, 1, pp.169~177 (1997)
- Eufinger H, "Significance of the height and width of the alveolar ridge in implantology in the edentulous maxilla. Analysis of 95 cadaver jaws and 24 consecutive patients", Mund Kiefer Gesichtschir, 3(Suppl 1), pp.S14~S18 (1999)
- Kim SG, "Implant dentistry: a rapidly evolving practice" (2011), InTech
- Moslehifard E, "Fullmouth rehabilitation of a patient with severely worn dentition and uneven occlusal plane: a clinical report", J Prosthodont, 21, pp.56~64 (2012)
- McCrea SJ, "Pre-operative radiographs for dental implants: are selection criteria being followed?", Br Dent J, 204, pp.675~682 (2008)
- Reddy MS, "A comparison of the diagnostic advantages of panoramic radiography and computed tomography scanning for placement of root form dental implants", Clin Oral Implants Res, 5, pp.229~238 (1994)
- Hanazawa T, "Radiologic measurements of the mandible: a comparison between CT-reformatted and conventional tomographic images", Clin Oral Implants Res, 15, pp.226~232 (2004)
- Scarfe WC, "Clinical applications of conebeam computed tomography in dental practice", J Can Dent Assoc, 72, pp.75~80 (2006)
- Benavides E, "Use of cone beam computed tomography in implant dentistry:the International Congress of Oral Implantologists consensus report", Implant Dent, 21, pp.78~86 (2012)
- Angelopoulos C, "Comparison between digital panoramic radiography and conebeam computed tomography for the identification of the mandibular canal as part of presurgical dental implant assessment", J Oral Maxillofac Surg, 66, pp.2130~2135 (2008)
- Kim ST, "Location of the mandibular canal and the topography of its neurovascular structures", J Craniofac Surg, 20, pp.936~939 (2009)
- Juodzbalys G, "Anatomy of mandibular vital structures. Part I: mandibular canal and inferior alveolar neurovascular bundle in relation with dental implantology", J Oral Maxillofac Res, 1, pp.e2~ (2010)
- Shahin KA, "Stature estimating the location of maxillary sinus and mandibular canal", N Am J Med Sci, 4, pp.586~589 (2012)
- Waltrick KB, "Accuracy of linear measurements and visibility of the mandibular canal of cone-beam computed tomography images with different voxel sizes: an in vitro study", J Periodontol, 84, pp.68~77 (2013)
- Kilic C, "The position of the mandibular canal and histologic feature of the inferior alveolar nerve", Clin Anat, 23, pp.34~42 (2010)
- Pramstraller M, "Ridge dimensions of the edentulous posterior maxilla: a retrospective analysis of a cohort of 127 patients using computerized tomography data", Clin Oral Implants Res, 22, pp.54~61 (2011)
- de Oliveira Júnior MR, "Morphometrical analysis of the human mandibular canal: a CT investigation", Surg Radiol Anat, 33, pp.345~352 (2011)
- Levine MH, "Inferior alveolar nerve canal position: a clinical and radiographic study", J Oral Maxillofac Surg, 65, pp.470~474 (2007)
- Watanabe H, "Mandible size and morphology determined with CT on a premise of dental implant operation", Surg Radiol Anat, 32, pp.343~349 (2010)
- Frei C, "Study on the necessity for crosssection imaging of the posterior mandible for treatment planning of standard cases in implant dentistry", Clin Oral Implants Res, 15, pp.490~497 (2004)
- Braut V, "Bone dimensions in the posterior mandible: a retrospective radiographic study using cone beam computed tomography. Part 1--analysis of dentate sites", J Periodontics Restorative Dent, 32, pp.175~184 (2012)