Influence of initial imperfections on ultimate strength of spherical shells
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Comprehensive consideration regarding influence mechanisms of initial imperfections on ultimate strength of spherical shells is taken to satisfy requirement of deep-sea structural design. The feasibility of innovative numerical procedure that combines welding simulation and nonlinear buckling analysis is verified by a good agreement to experimental and theoretical results. Spherical shells with a series of wall thicknesses to radius ratios are studied. Residual stress and deformations from welding process are investigated separately. Variant influence mechanisms are discovered. Residual stress is demonstrated to be influential to stress field and buckling behavior but not to the ultimate strength. Deformations are proved to have a significant impact on ultimate strength. When central angles are less than critical value, concave magnitudes reduce ultimate strengths linearly. However, deformations with central angles above critical value are of much greater harm. Less imperfection susceptibility is found in spherical shells with larger wall thicknesses to radius ratios.
Abstract
Comprehensive consideration regarding influence mechanisms of initial imperfections on ultimate strength of spherical shells is taken to satisfy requirement of deep-sea structural design. The feasibility of innovative numerical procedure that combines welding simulation and nonlinear buckling analysis is verified by a good agreement to experimental and theoretical results. Spherical shells with a series of wall thicknesses to radius ratios are studied. Residual stress and deformations from welding process are investigated separately. Variant influence mechanisms are discovered. Residual stress is demonstrated to be influential to stress field and buckling behavior but not to the ultimate strength. Deformations are proved to have a significant impact on ultimate strength. When central angles are less than critical value, concave magnitudes reduce ultimate strengths linearly. However, deformations with central angles above critical value are of much greater harm. Less imperfection susceptibility is found in spherical shells with larger wall thicknesses to radius ratios.
참고문헌 (22)
- Bian, R. G., "A quantitative study on the effect of welding residual stress on fatigue life", J. Ship Mech, 15(7), pp.776~783 (2011)
- Gerard, G., "Plastic stability theory of thin shells", J. Aeronautical Sci, 24(4), pp.269~274 (1957)
- Grondin, G. Y., "Buckling of stiffened steel plates-a parametric study", J. Constr. Steel Res, 50, pp.151~175 (1999)
- Test of Stiffened and Unstiffened Machined Spherical Shells under External Hydrostatic Pressure, "Krenzke, M. A.", ~, pp.David Taylor Model Basin, report 1741, S-R0110101 (1963)
- Lee, C. H., "Influence of the residual stresses and distortions on the structural behavior of girth-welded cylindrical steel members", Constr. Build. Mater, 41, pp.766~776 (2013)
- Lu, B., "Ultimate strength of pressure spherical hull in deep-sea manned submersibles", J. Ship Mech, 8(1), pp.51~58 (2004)
- Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part II stiffened panels", Ocean. Eng, 35, pp.271~280 (2008)
- Pan, B. B., "A comparison of different rules for the spherical pressure hull of deep manned submersibles", J. Ship Mech, 15(3), pp.276~285 (2011)
- Pan, B. B., "An overview of buckling and ultimate strength of spherical pressure hull under external pressure", Mar. Struct, 23, pp.227~240 (2010)
- Pan, B. B., "Experimental verification of the new ultimate strength equation of spherical pressure hulls", Mar. Struct, 29, pp.169~176 (2012)
- Shanghai Iron and Steel Institute, "The Comprehensive Properties of Titanium Alloy Rolled Rods", ~ (1984)
- Song, S. P., "A full-field residual stress estimation scheme for fitness-for-service assessment of pipe girth welds: Part I d identification of key parameters", Int. J. Press. Vessel. Pip, 126-127, pp.58~70 (2015)
- Tekgoz, M., "Ultimate strength assessment of welded stiffened plates", Eng. Struct, 84, pp.325~339 (2015)
- Tian, X. T., "Numerical analysis for welding deformations due to circumferential welds in cylindrical shells", J. Aeronatical Mater, 16(2), pp.50~56 (1996)
- Wang, R. H., "Influence of initial deflection on plastic stability of manned deep-sea submersible's pressure sphere hull", Ocean Eng, 23(4), pp.111~115 (2005)
- Wang, Z. L., "The influence of the initial imperfections on the ultimate strength of manned deep-sea submersible pressure sphere hull", Shipbuild. China, 48(2), pp.45~50 (2007)
- Wunderlich, W., "Buckling behavior of imperfect spherical shells", Int. J. Non-Linear Mech, 37, pp.589~604 (2002)
- Research on Pressure Hull for Deep Submergence Research Vehicles made of Titanium Alloy, "Yokota, K.", Mitsubishi Heavy Industries, Ltd, 440~442, pp.Technical Review, 1986-7, 23(4) (1986)
- Yu, M. H., "Development of research on the pressure shell structure of deep manned submersible", J. Jiangsu Univ. Sci. Technol. Nat. Sci. Ed, 18(4), pp.1~6 (2004)
- Zhang, Y. M., "Heat balance calculation of electron beam cold hearth melting process of TC4alloy", Rare Metal Mater. Eng, 37(4), pp.649~651 (2008)
- Zheng, Y. S., "Collapse pressure of spherical shells with initial imperfections under uniform pressure", Shipbuild. China, 1986(1), pp.49~58 (1986)
- Zoelly, R., "Ueber ein knickungsproblem an der kugelschale", ~ (1915)