Computational analysis of welding radial deformation of typical pressure cylindrical shell with ring stiffener
4
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
We report on the evaluation of the radial deformation caused by the welding process on a typical pressure cylindrical shell with ring stiffeners. Welding experiments on butt and fillet welding were conducted beforehand, and temperature-dependent material properties were considered. The out-ofplane welding distortion and residual stress were measured using a three-coordinate measuring machine and X-ray diffraction, respectively. Effective thermal elastic plastic FE analysis based on parallel computation technology was performed to examine the mechanical behaviors. Computed results were validated by comparison with experimental measurements. Welding inherent deformations of the examined butt and fillet joints were then evaluated by integrating computed plastic strains. The elastic FE analysis, with welding inherent deformation as mechanical loading, was employed to examine the dimensional variation of the considered pressure cylindrical shell. The influence of ring stiffener on welding radial deformation was also discussed. Moreover, the application of welding sequence modification and inverse deformation was numerically examined with the proposed elastic FE analysis to reduce the welding radial deformation and enhance the fabrication accuracy.
Abstract
We report on the evaluation of the radial deformation caused by the welding process on a typical pressure cylindrical shell with ring stiffeners. Welding experiments on butt and fillet welding were conducted beforehand, and temperature-dependent material properties were considered. The out-ofplane welding distortion and residual stress were measured using a three-coordinate measuring machine and X-ray diffraction, respectively. Effective thermal elastic plastic FE analysis based on parallel computation technology was performed to examine the mechanical behaviors. Computed results were validated by comparison with experimental measurements. Welding inherent deformations of the examined butt and fillet joints were then evaluated by integrating computed plastic strains. The elastic FE analysis, with welding inherent deformation as mechanical loading, was employed to examine the dimensional variation of the considered pressure cylindrical shell. The influence of ring stiffener on welding radial deformation was also discussed. Moreover, the application of welding sequence modification and inverse deformation was numerically examined with the proposed elastic FE analysis to reduce the welding radial deformation and enhance the fabrication accuracy.
참고문헌 (30)
- Baruch, M., "Effect of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydrostatic pressure", J. Mech. Eng. Sci, 5(1), pp.23~27 (1963)
- Brabin, T. A., "Finite element analysis of cylindrical pressure vessels having a misalignment in a circumferential joint", Int. J. Pres. Ves. Pip, 87(4), pp.197~201 (2010)
- Brown, S., "Finite element simulation of welding of large structures", J. Eng. Ind, 114(4), pp.441~451 (1992)
- Hocken, R. J., "Coordinate Measuring Machines and Systems" (2012), CRC press
- Josefson, B. L., "Welding residual distortions in ring-stiffened pipes", J. Offshore Mech. Arctic Eng, 118(2), pp.121~126 (1996)
- Ma, N., "Out-of-plane welding distortion prediction and mitigation in stiffened welded structures", Int. J. Adv. Manuf. Technol, 84(5-8), pp.1371~1389 (2016)
- Maekawa, A., "Fast threedimensional multipass welding simulation using an iterative substructure method", J. Mater. Process. Technol, 215, pp.30~41 (2015)
- Moshaiov, A., "Modeling of welding distortion in stiffened rings", J. Ship Res, 35, pp.162~171 (1991)
- Murakawa, H., "Applications of inherent strain and interface element to simulation of welding deformation in thin plate structures", Comput. Mater. Sci, 51(1), pp.43~52 (2012)
- Noyan, I. C., "Residual Stress : Measurement by Diffraction and Interpretation" (2013), Springer
- Rastgar, M., "Buckling behavior of cylindrical steel tanks with concavity of vertical weld line imperfection", J. Constr. Steel Res, 145, pp.289~299 (2018)
- Rasti, A., "Stress analysis of welded joints in internal stiffener rings in an aluminum cylinder", Proc. IME J. Mater. Des. Appl, 230(1), pp.121~130 (2016)
- Schajer, G.S., "Practical Residual Stress Measurement Methods" (2013), John Wiley & Sons
- Ueda, Y., "Welding Deformation and Residual Stress Prevention" (2012), Elsevier
- Jiangchao Wang, "Determination of Dimensional Profile and Heat Input of Welded Joint with Average Temperature", International Journal of Precision Engineering and Manufacturing, 20(4), pp.651~662 (2019), 한국정밀공학회[DOI]
- Wang, J. H., "Buckling of cylindrical shells with longitudinal joints under external pressure", Thin-Walled Struct, 48(12), pp.897~904 (2010)
- Wang, J., "Effective thermal elastic plastic finite element computation for welding distortion investigation of pozidriv-type welded structure with rectangular pipes and its mitigation", Proc. IME B J. Eng. Manufact, 234(14), pp.1729~1741 (2020)
- Wang, J., "Numerical prediction and mitigation of out-of-plane welding distortion in ship panel structure by elastic FE analysis", Mar. Struct, 34, pp.135~155 (2013)
- Wang, J., "FE analysis of buckling behavior caused by welding in thin plates of high tensile strength steel", J. Mater. Eng. Perform, 23(12), pp.4358~4365 (2014)
- Wang, J., "An efficient FE computation for predicting welding induced buckling in production of ship panel structure", Mar. Struct, 41, pp.20~52 (2015)
- Wang, J., "Welding distortion prediction with elastic FE analysis and mitigation practice in fabrication of cantilever beam component of jack-up drilling rig", Ocean Eng, 130, pp.25~39 (2017)
- Wang, J., "Framework of computational approach based on inherent deformation for welding buckling investigation during fabrication of lightweight ship panel", Ocean Eng, 157, pp.202~210 (2018)
- Wang, J. C., "Out-of-plane welding distortion control of thick plate butt-welded joint of a container ship", J. Harbin Eng. Univ, 40(9), pp.1562~1568 (2019)
- Wang, J., "Dimensional precision controlling on out-of-plane welding distortion of major structures in fabrication of ultra large container ship with 20000TEU", Ocean Eng, 199, pp.106993~ (2020)
- Withers, P. J., "Recent advances in residual stress measurement", Int. J. Pres. Ves. Pip, 85(3), pp.118~127 (2008)
- Yamamoto, Y., "General instability of ringstiffened cylindrical shells under external pressure", Mar. Struct, 2(2), pp.133~149 (1989)
- Zhou, H., "Application of efficient TEP FE computation on accurate fabrication of cylindrical leg structure of jack-up rig", Ocean Eng, 196, pp.106812~ (2020)
- Zhou, H., "Preliminary investigation on plate bending with multiple-line induction heating", J. Mar. Sci. Technol, 25(2), pp.455~466 (2020)
- Zhou, H., "Prediction and mitigation of out-ofplane welding distortion of a typical block in fabrication of a semi-submersible lifting and disassembly platform", Mar. Struct, 77, pp.102964~ (2021)
- Zhou, H., "Mitigation of welding induced buckling with transient thermal tension and its application for accurate fabrication of offshore cabin structure", Mar. Struct, 81, pp.103104~ (2022)