Development of a numerical simulation tool for efficient and robust prediction of ship resistance
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In this paper, a two-phase flow solver HiFoam® has been developed based on the OpenFOAM® to predict resistance of a ship in calm water. The VOF method of OpenFOAM® was reviewed and a simple flux limiter was introduced to enhance the robustness of the solver. The procedure for predicting ship motion was modified by introducing Quasi-Steady Fluid-Body Interaction (QS-FBI) with least square regression to improve the efficiency. Other minor factors were considered as well in terms of the efficiency and robustness. The HiFoam was applied to KCS and JBC simulations to validate its efficiency and accuracy by comparing the results to experimental data and STAR-CCM+. The HiFoam® was also applied to various ships and it showed good agreements to the experimental data.
Abstract
In this paper, a two-phase flow solver HiFoam® has been developed based on the OpenFOAM® to predict resistance of a ship in calm water. The VOF method of OpenFOAM® was reviewed and a simple flux limiter was introduced to enhance the robustness of the solver. The procedure for predicting ship motion was modified by introducing Quasi-Steady Fluid-Body Interaction (QS-FBI) with least square regression to improve the efficiency. Other minor factors were considered as well in terms of the efficiency and robustness. The HiFoam was applied to KCS and JBC simulations to validate its efficiency and accuracy by comparing the results to experimental data and STAR-CCM+. The HiFoam® was also applied to various ships and it showed good agreements to the experimental data.
참고문헌 (21)
- Brackbill, J. U., "A continuum method for modeling surface tension", J. Comput. Phys, 100, pp.335~354 (1992)
- Jasak, H., "Rapid free surface simulation for steady-state hull resistance with FVM using FOAM-extend", 30th Symposium on Naval Hydrodynamics (2014)
- Kim, G. H., "Numerical simulations for predicting resistance and self-propulsion performances of JBC using OpenFOAM and STAR-CCMþ", Tokyo 2015 a Workshop on CFD in Ship Hydrodynamics (2015), National Maritime Research Institute
- Larsson, L., , Proceedings of Tokyo 2015 a Workshop on CFD in Ship Hydrodynamics (2015), National Maritime Research Institute
- Lee, S. B., "Application of OpenFOAM to prediction of ship performances", 9th International OpenFOAM Workshop (2014)
- Lee, S. B., "Application of OpenFOAM to prediction of hull resistance", 8th International OpenFOAM Workshop (2013)
- Muzaferija, S., "A two-fluid Navier-Stokes solvers to simulate water entry", Twenty-Second Symposium on Naval Hydrodynamics (1999)
- Newman, J. N., "Panel methods in marine hydrodynamics", 11th Australasian Fluid Mechanics Conference (1992), University of Tasmania
- "OpenFOAM"[URL]
- Stanford University Unstructured (SU2): An Open-Source Integrated Computational Environment for Multi-Physics Simulation and Design, "Palacios, F.", AIAA, ~, pp.AIAA Paper 2013-0287 (2013)
- Stanford University Unstructured (SU2):Open-Source Analysis and Design Technology for Turbulent Flows, "Palacios, F.", AIAA, ~, pp.AIAA Paper 2014-0243 (2014)
- 박선호, "볼륨비 이송방정식의 소스항을 이용한 자유수면 유동 해석의 해 확산 감소", 한국전산유체공학회지, 19(1), pp.15~20 (2014), 한국전산유체공학회[DOI]
- 박선호, "Investigation on the wall function implementation for the prediction of ship resistance", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.33~46 (2013), 대한조선학회
- Rhie, C. M., "A numerical study of the turbulent flow past an isolated airfoil with trailing edge separation", AIAA, 1982, ~
- Rusche, H., "Computational Fluid Dynamics of Dispersed Two-Phase Flows at High Phase Fractions", Ph.D., pp.2002
- Sweby, P. K., "High resolution schemes using flux limiters for hyperbolic conservation laws", SIAM J. Numer. Analysis, 21(5), pp.995~1011 (1984)
- Ubink, O., "Numerical Prediction of Two Fluid Systems with Sharp Interface", Ph.D, pp.1997
- Van, S. H., "Experimental investigation of the flow characteristics around practical hull forms", Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design (1998)
- van Leer, B., "Towards the ultimate conservative difference scheme", J. Comput. Phys, 32(1), pp.101~136 (1979)
- Derivation, Modeling, and Solution of the Conditionally Averaged Two-phase Flow Equations, "Weller, H. G.", Nabla Ltd, ~, pp.Technical Report TR (2002), HGW[DOI]
- Witherden, F. D., "An open source framework for solving advection-diffusion type problems on streaming architectures using the flux reconstruction approach", Comput. Phys. Commun, 185, pp.3028~3040 (2014)