OpenFOAM을 이용한 주형체 활주선의 저항 및 항주자세 추정
Prediction of Resistance and Planing Attitude for Prismatic Planing Hull using OpenFOAM
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The prediction of the hydrodynamic performance of a planing hull vessel is an important and challenging topic for computational fluid dynamic (CFD) applications to naval hydrodynamics. In this paper, the resistance and planing attitude analysis for a Fridsma hull, which is a prismatic planing hull, in still water are numerically studied using OpenFOAM. OpenFOAM is an open source code package based on C++ libraries and the finite volume method (FVM) for the discretization of the RANS equation. The volume of fluid method (VOF) is used to capture the water–air interface and the SST model is used for the turbulence simulation. The overset mesh method is used to capture the large motion of the hull at higher speeds. Before the extensive analysis, uncertainty analyses using various time steps and grid sizes were performed for one ship speed case of Fn = 1.19. The results of the present study are compared with those of a model test, other CFD research, and Savitsky’s empirical formula. The results of the present study, following the trend of other CFD results, slightly over predict the resistance and under predict the sinkage and, more significantly, the trim.
Abstract
The prediction of the hydrodynamic performance of a planing hull vessel is an important and challenging topic for computational fluid dynamic (CFD) applications to naval hydrodynamics. In this paper, the resistance and planing attitude analysis for a Fridsma hull, which is a prismatic planing hull, in still water are numerically studied using OpenFOAM. OpenFOAM is an open source code package based on C++ libraries and the finite volume method (FVM) for the discretization of the RANS equation. The volume of fluid method (VOF) is used to capture the water–air interface and the SST model is used for the turbulence simulation. The overset mesh method is used to capture the large motion of the hull at higher speeds. Before the extensive analysis, uncertainty analyses using various time steps and grid sizes were performed for one ship speed case of Fn = 1.19. The results of the present study are compared with those of a model test, other CFD research, and Savitsky’s empirical formula. The results of the present study, following the trend of other CFD results, slightly over predict the resistance and under predict the sinkage and, more significantly, the trim.
참고문헌 (15)
- Bustos, D. S. H., "Numerical Hull Resistance Calculation of a Catamarán Using OpenFOAM", Ship Science and Technology, 11(21), pp.29~39 (2017)[DOI]
- Chevrier, P., "A Van Leer Finite Volume Scheme for The Euler Equations on Unstructured Mesh", Mathematical Modelling and Numerical Analysis, 27(2), pp.183~201 (1993)
- Cucinotta, F., "Experimental and Numerical Hydrodynamic Analysis of a Planing Hull Pleasure Boat", International Journal of Applied Engineering Research, 13(1), pp.30~39 (2018)
- A Systematic Study of the Rough-water Performance of Planing Boats, "Fridsma, G.", Davidson Laboratory, ~, pp.Davidson Laboratory Report, 1275 (1969)
- Fu, T. C., "A Detailed Assessment of Numerical Flow Analysis (NFA) to Predict the Hydrodynamics of a Deep-V Planing Hull", 29th Symposium on Naval Hydrodynamics, pp.26~31 (2012)
- 고광수, "CFD를 이용한 수중 예인체의 유체력 미계수 결정과 6자유도 운동해석", 대한조선학회 논문집, 53(4), pp.315~328 (2016), 대한조선학회
- Hassan, G., "A Hydrodynamic Methodology and CFD Analysis for Performance Prediction of Stepped Planing Hulls", Polish Maritime Research, 22(2), pp.23~31 (2015)[DOI]
- Prediction of Ship Resistance in Head Waves Using OpenFOAM, "Islam, H.", Taylor & Francis Group, ~ (2017)
- Marcello, I, "Hydrodynamics of Planing Hull by CFD", Master, pp.2015
- Mousaviraad, S. M., "URANS Studies of Hydrodynammic Performance and Slamming Loads on High-speed Planing Hulls in Calm Water and Waves for Deep and Shallow Conditions", Applied Ocean Reseacch, 51, pp.222~240 (2015)[DOI]
- Newmark, N. M., "A Method of Computation for Structural Dynamics", Journal of the Engineering Mechanics Division, 85(3), pp.67~94 (1959)
- OpenCFD Ltd, "OpenFOAM User Guide", ~ (2017)
- Savitsky, D., "Hydrodynamic Design of Planing Hulls", Marine Technology and SNAME News, 1(4), pp.71~95 (1964)
- Stern, F., "Comprehensive Approach to Verification and Validation of CFD Simulations —Part 1 : Methodology and Procedures", Journal of Fluids Engineering, 123(4), pp.793~802 (2001)[DOI]
- Wilson, R., "Comprehensive Approach to Verification and Validation of CFD Simulations —Part 2 : Application for Rans Simulation of a Cargo", Container Ship, 2001, pp.123(4), 803~810