A study on the thermal deformation characteristics of steel plates due to multi-line heating
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.
Abstract
This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.
참고문헌 (14)
- Ha, Y.S., "A Study on the Prediction of Plate Deformation by Heating of Weaving Path in Thick Plate Bending", pp.2001
- Jang, C.D., "An experimental study of characteristics of plate deformation by heating process", J. Soc. Nav. Archit. Korea, 38(2), pp.62~70 (2001)
- 장창두, "선상가열 판변형 해석을 위한 고유변형도 영역의 결정법", 대한조선학회 논문집, 39(1), pp.9~89 (2002), 대한조선학회
- 이박인, "열간가공에 의한 강판의 곡 가공 자동화 시스템", 대한조선학회 논문집, 39(2), pp.5~44 (2002), 대한조선학회
- Lee, J.S., "Plate Forming automation system of steel plates by line heating method (II)", J. Soc. Nav. Archit. Korea, 33(3), pp.81~93 (1996)
- Lee, J.S., "Plate Forming automation system of steel plates by line heating method (III)", J. Soc. Nav. Archit. Korea, 34(2), pp.85~89 (1997)
- 이주성, "평블록의 용접변형예측 시뮬레이터", 대한조선학회 논문집, 41(1), pp.55~63 (2004), 대한조선학회
- 이주성, "선상가열 변형예측식 자동 산출을 위한 지식기반 방법의 개발", 대한용접접합학회지, 28(1), pp.92~99 (2010), 대한용접접합학회
- Lee, S.H., "A study on the thermal deformation characteristics of multi-line heating", Proc. 26th Asian-Pacific Technical Exchange & Advisory Meeting on Marine Structures (TEAM 2012), pp.423~427 (2012), Kyushu University
- Lee, J.S., "On the thermal deformation prediction of steel plates by multi-line heating", Proceedings of the 28th Asian-Pacific Technical Exchange & Advisory Meeting on Marine Structures (TEAM 2014), pp.66~73 (2014), Istanbul Technical University
- Masubuchi, K., "Analysis of Welded Structures" (1980), Pergamon Press
- Nomoto, T., "Development of simulator for plate bending by line heating", J. Soc. Nav. Archit. Jpn., 168, pp.527~535 (1990)
- Shin, J.G., "A two-dimensional simulator for plate forming by line heating", J. Soc. Nav. Archit. Korea, 29(1), pp.191~200 (1992)
- Tsuji, I., "A study on line heating process for plate bending of ship steels", J. West. Soc. Nav. Archit., 76, pp.149~160 (1988)