Development of stress correction formulae for heat formed steel plates
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The heating process such as line heating, triangular heating and so on is widely used in plate forming of shell plates found in bow and stern area of outer shell in a ship. Local shrinkage during heating process is main physical phenomenon used in plate forming process. As it is well appreciated, the heated plate undergoes the change in material and mechanical properties around heated area due to the harsh thermal process. It is, therefore, important to investigate the changes of physical and mechanical properties due to heating process in order to use them plate the design stage of shell plates. This study is concerned with the development of formula of plastic hardening constitutive equation for steel plate on which line heating is applied. In this study the stress correction formula for the heated plate has been developed based on the numerical simulation of tension test with varying plate thickness and heating speed through the regression analysis of multiple variable case. It has been seen the developed formula shows very good agreement with results of numerical simulation. This paper ends with usefulness of the present formula in examining the structural characteristic of ship's hull.
Abstract
The heating process such as line heating, triangular heating and so on is widely used in plate forming of shell plates found in bow and stern area of outer shell in a ship. Local shrinkage during heating process is main physical phenomenon used in plate forming process. As it is well appreciated, the heated plate undergoes the change in material and mechanical properties around heated area due to the harsh thermal process. It is, therefore, important to investigate the changes of physical and mechanical properties due to heating process in order to use them plate the design stage of shell plates. This study is concerned with the development of formula of plastic hardening constitutive equation for steel plate on which line heating is applied. In this study the stress correction formula for the heated plate has been developed based on the numerical simulation of tension test with varying plate thickness and heating speed through the regression analysis of multiple variable case. It has been seen the developed formula shows very good agreement with results of numerical simulation. This paper ends with usefulness of the present formula in examining the structural characteristic of ship's hull.
참고문헌 (20)
- Aronofsky, J., "Evaluation of stress distribution in the symmetrical neck of flat tensile bars", J. Appl. Mech., 18, pp.75~84 (1951)
- ASTM E8, "Standard Test Methods from Tension Testing of Metallic Materials", American Society for Testing and Materials, ~ (2004)
- Bridgman, P.W., "Studies in Large Plastic Flow and Fracture" (1952), McGraw-Hill
- Choung, J.M., "On the Fracture Criteria of Steels for Marine Structures Subjected to Impact Loadings", pp.2007
- Ha, Y.S., "A Study on the Prediction of Plate Deformation by Heating of Weaving Path in Thick Plate Bending", pp.2001
- Hollomon, J.H., "Tensile deformation", Trans. AIME, 162, pp.268~290 (1945)
- Jang, C.D., "An experimental study of characteristics of plate deformation by heating process", J. Soc. Nav. Archit. Korea, 38(2), pp.62~70 (2001)
- 장창두, "선상가열 판변형 해석을 위한 고유변형도 영역의 결정법", 대한조선학회 논문집, 39(1), pp.9~89 (2002), 대한조선학회
- Kim, J.W., "A study of thermal deformation characteristics of steel plate due to multi-line heating", Proceedings of the Annual Autumn Meeting, SNAK, pp.849~852 (2011)
- 이박인, "열간가공에 의한 강판의 곡 가공 자동화 시스템", 대한조선학회 논문집, 39(2), pp.5~44 (2002), 대한조선학회
- Lee, J.S., "Plate forming automation system of steel plates by line heating method (II)", J. Soc. Nav. Archit. Korea, 33(3), pp.81~93 (1996)
- Lee, J.S., "Plate forming automation system of steel plates by line heating method (III)", J. Soc. Nav. Archit. Korea, 34(2), pp.85~89 (1997)
- 이주성, "선상가열 변형예측식 자동 산출을 위한 지식기반 방법의 개발", 대한용접접합학회지, 28(1), pp.92~99 (2010), 대한용접접합학회
- Lim, H.K., "Study on the Plasticity and Fracture of Steels for Ship Shell Structure by Line Heating", pp.2012
- Ling, Y., "Uniaxial true stress-strain after necking", AMP J. Technol., 5, pp.37~48 (1996)
- Nomoto, T., "Development of simulator for plate bending by line heating", J. Soc. Nav. Archit. Jpn., 168, pp.527~535 (1991)
- Shin, J.G., "A two-dimensional simulator for plate forming by line heating", J. Soc. Nav. Archit. Korea, 29(1), pp.191~200 (1992)
- Simulia, "Introduction to Abaqus" (2013), BB-Media
- Tsuji, I., "A study on line heating process for plate bending of ship steels", J. West. Soc. Nav. Archit., 76, pp.149~160 (1988)
- Zhang, K.S., "Numerical analysis of the stress-strain curve and fracture initiation for ductile material", Eng. Fract. Mech., 49, pp.235~241 (1994)[DOI]