Combination of a new ultrasonic tip with rotary systems for the preparation of flattened root canals
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study evaluated 2 nickel-titanium rotary systems and a complementary protocol with an ultrasonic tip and a small-diameter instrument in flattened root canals. Materials and Methods: Thirty-two human maxillary second premolars with flattened canals (buccolingual diameter ≥4 times larger than the mesiodistal diameter) at 9 mm from the radiographic apex were selected. The root canals were prepared by ProDesign Logic (PDL) 30/0.01 and 30/0.05 or Hyflex EDM (HEDM) 10/0.05 and 25/0.08 (n = 16), followed by application of the Flatsonic ultrasonic tip in the cervical and middle thirds and a PDL 25/0.03 file in the apical third (FPDL). The teeth were scanned using micro-computed tomography before and after the procedures. The percentage of volume increase, debris, and uninstrumented surface area were analyzed using the Kruskal-Wallis, Dunn, Wilcoxon, analysis of variance/Tukey, and paired and unpaired t-tests (α = 0.05). Results: No significant difference was found in the volume increase and uninstrumented surface area between PDL and HEDM (p > 0.05). PDL had a higher percentage of debris than HEDM in the middle and apical thirds (p < 0.05). The FPDL protocol resulted in less debris and uninstrumented surface area for PDL and HEDM (p < 0.05). This protocol, with HEDM, reduced debris in the middle and apical thirds and uninstrumented surface area in the apical third (p < 0.05). Conclusions: High percentages of debris and uninstrumented surface area were observed after preparation of flattened root canals. The HEDM, Flatsonic tip, and 25/0.03 instrument protocol enhanced cleaning in flattened root canals.
Abstract
Objectives: This study evaluated 2 nickel-titanium rotary systems and a complementary protocol with an ultrasonic tip and a small-diameter instrument in flattened root canals. Materials and Methods: Thirty-two human maxillary second premolars with flattened canals (buccolingual diameter ≥4 times larger than the mesiodistal diameter) at 9 mm from the radiographic apex were selected. The root canals were prepared by ProDesign Logic (PDL) 30/0.01 and 30/0.05 or Hyflex EDM (HEDM) 10/0.05 and 25/0.08 (n = 16), followed by application of the Flatsonic ultrasonic tip in the cervical and middle thirds and a PDL 25/0.03 file in the apical third (FPDL). The teeth were scanned using micro-computed tomography before and after the procedures. The percentage of volume increase, debris, and uninstrumented surface area were analyzed using the Kruskal-Wallis, Dunn, Wilcoxon, analysis of variance/Tukey, and paired and unpaired t-tests (α = 0.05). Results: No significant difference was found in the volume increase and uninstrumented surface area between PDL and HEDM (p > 0.05). PDL had a higher percentage of debris than HEDM in the middle and apical thirds (p < 0.05). The FPDL protocol resulted in less debris and uninstrumented surface area for PDL and HEDM (p < 0.05). This protocol, with HEDM, reduced debris in the middle and apical thirds and uninstrumented surface area in the apical third (p < 0.05). Conclusions: High percentages of debris and uninstrumented surface area were observed after preparation of flattened root canals. The HEDM, Flatsonic tip, and 25/0.03 instrument protocol enhanced cleaning in flattened root canals.
참고문헌 (40)
- Barbizam JV, "Effectiveness of manual and rotary instrumentation techniques for cleaning flattened root canals", J Endod, 28, pp.365~366 (2002)
- Versiani MA, "Flat-oval root canal preparation with self-adjusting file instrument: a micro-computed tomography study", J Endod, 37, pp.1002~1007 (2011)
- Vasconcelos LRSM, "Effect of ultrasound streaming on the disinfection of flattened root canals prepared by rotary and reciprocating systems", J Appl Oral Sci, 25, pp.477~482 (2017)
- Filpo-Perez C, "Micro-computed tomographic analysis of the root canal morphology of the distal root of mandibular first molar", J Endod, 41, pp.231~236 (2015)
- Lacerda MFLS, "Cleaning and shaping oval canals with 3 instrumentation systems: a correlative micro-computed tomographic and histologic study", J Endod, 43, pp.1878~1884 (2017)
- Siqueira JF Jr, "What happens to unprepared root canal walls: a correlative analysis using micro-computed tomography and histology", scanning electron microscopy, 2018, pp.51, 501~508
- Lopes RMV, "Untouched canal areas and debris accumulation after root canal preparation with rotary and adaptive systems", Aust Endod J, 44, pp.260~266 (2018)
- Moura-Netto C, "CT study of the performance of reciprocating and oscillatory motions in flattened root canal areas", Braz Oral Res, 29, pp.1~6 (2015)
- Arias A, "Effect of canal preparation with TRUShape and Vortex rotary instruments on three-dimensional geometry of oval root canals", Aust Endod J, 44, pp.32~39 (2018)
- Cangül Keskin, "Comparison of the shaping ability of novel thermally treated reciprocating instruments", Restorative Dentistry and Endodontics, 43(2), pp.1~7 (2018), 대한치과보존학회
- De-Deus G, "Accumulated hard tissue debris produced during reciprocating and rotary nickel-titanium canal preparation", J Endod, 41, pp.676~681 (2015)
- De-Deus G, "Micro-CT comparison of XP-endo Finisher and passive ultrasonic irrigation as final irrigation protocols on the removal of accumulated hard-tissue debris from oval shaped-canals", Clin Oral Investig, 23, pp.3087~3093 (2019)
- Üreyen Kaya B, "Mechanical reduction in intracanal Enterococcus faecalis when using three different single-file systems: an ex vivo comparative study", Int Endod J, 52, pp.77~85 (2019)
- Marwa M. Bedier, "Improved dentin disinfection by combining different-geometry rotary nickel-titanium files in preparing root canals", Restorative Dentistry and Endodontics, 43(4), pp.1~10 (2018), 대한치과보존학회[DOI]
- Brasil SC, "Canal transportation, unprepared areas, and dentin removal after preparation with BT-RaCe and ProTaper next systems", J Endod, 43, pp.1683~1687 (2017)
- Gagliardi J, "Evaluation of the shaping characteristics of ProTaper Gold, ProTaper NEXT, and ProTaper universal in curved canals", J Endod, 41, pp.1718~1724 (2015)
- Goo HJ, "Mechanical properties of various heat-treated nickel-titanium rotary instruments", J Endod, 43, pp.1872~1877 (2017)
- Stringheta CP, "Micro-computed tomographic evaluation of the shaping ability of four instrumentation systems in curved root canals", Int Endod J, 52, pp.908~916 (2019)
- Venino PM, "A micro-computed tomography evaluation of the shaping ability of two nickel-titanium instruments, HyFlex EDM and ProTaper Next", J Endod, 43, pp.628~632 (2017)
- Coelho BS, "Performance of three single instrument systems in the preparation of long oval canals", Braz Dent J, 27, pp.217~222 (2016)
- Tanomaru-Filho M, "Cyclic fatigue resistance of heat-treated nickel-titanium instruments", Iran Endod J, 13, pp.312~317 (2018)
- Gavini G, "Nickel-titanium instruments in endodontics: a concise review of the state of the art", Braz Oral Res, 32, pp.e67~ (2018)
- Pirani C, "HyFlex EDM: superficial features, metallurgical analysis and fatigue resistance of innovative electro discharge machined NiTi rotary instruments", Int Endod J, 49, pp.483~493 (2016)
- Koray Yılmaz, "In vitro comparison of the cyclic fatigue resistance of HyFlex EDM, One G, and ProGlider nickel titanium glide path instruments in single and double curvature canals", Restorative Dentistry and Endodontics, 42(4), pp.282~289 (2017), 대한치과보존학회
- Versiani MA, "Micro-CT evaluation of the efficacy of hard-tissue removal from the root canal and isthmus area by positive and negative pressure irrigation systems", Int Endod J, 49, pp.1079~1087 (2016)
- Rivera-Peña ME, "Ultrasonic tips as an auxiliary method for the instrumentation of oval-shaped root canals", Braz Oral Res, 33, pp.e011~ (2019)
- Rivera-Peña ME, "A novel ultrasonic tip for removal of filling material in flattened", oval-shaped root canals: a microCT study, 2018, pp.32, e88~
- Santos-Junior AO, "New ultrasonic tip decreases uninstrumented surface and debris in flattened canals: a micro-computed tomographic study", J Endod (2020)[DOI]
- Espir CG, "Counterclockwise or clockwise reciprocating motion for oval root canal preparation: a micro-CT analysis", Int Endod J, 51, pp.541~548 (2018)
- Espir CG, "Shaping ability of rotary or reciprocating systems for oval root canal preparation: a micro-computed tomography study", Clin Oral Investig, 22, pp.3189~3194 (2018)
- Jou YT, "Endodontic working width: current concepts and techniques", Dent Clin North Am, 48, pp.323~335 (2004)
- Espir CG, "Radiographic and micro-computed tomography classification of root canal morphology and dentin thickness of mandibular incisors", J Conserv Dent, 21, pp.57~62 (2018)
- Wu MK, "Consequences of and strategies to deal with residual post-treatment root canal infection", Int Endod J, 39, pp.343~356 (2006)
- De-Deus G, "Arrowhead design ultrasonic tip as a supplementary tool for canal debridement", Int Endod J, 53, pp.410~420 (2020)
- Siqueira Junior JF, "Unprepared root canal surface areas: causes, clinical implications, and therapeutic strategies", Braz Oral Res, 32, pp.e65~ (2018)
- Paqué F, "Preparation of oval-shaped root canals in mandibular molars using nickel-titanium rotary instruments: a micro-computed tomography study", J Endod, 36, pp.703~707 (2010)
- Pinheiro SR, "Evaluation of apical transportation and centring ability of five thermally treated NiTi rotary systems", Int Endod J, 51, pp.705~713 (2018)
- Plotino G, "Influence of size and taper of basic root canal preparation on root canal cleanliness: a scanning electron microscopy study", Int Endod J, 52, pp.343~351 (2019)
- Pinto JC, "Micro-CT evaluation of apical enlargement of molar root canals using rotary or reciprocating heat-treated NiTi instruments", J Appl Oral Sci, 27, pp.e20180689~ (2019)
- Pivoto-João MM, "Root canal preparation and enlargement using thermally-treated nickel-titanium rotary systems in curved canals", J Endod (2020)[DOI]